STANLEY FATMAX FMHT77586-1 Izpi Berdeko Gurutze Lerroko Laser Mailaren Erabiltzaile Eskuliburua

1. Sarrera

Thank you for choosing the STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level. This precision instrument is designed to project bright, clear green laser lines for various leveling and alignment tasks. This manual provides essential information for safe operation, proper setup, and effective use of your laser level. Please read it thoroughly before first use and keep it for future reference.

2. Segurtasun informazioa

OHARRA: This is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at other people or reflective surfaces.

• Always operate the laser level in a safe manner, following all instructions in this manual.
• Do not attempt to modify or disassemble the laser level. This can cause serious injury and will void the warranty.
• Keep the laser level out of reach of children and untrained personnel.
• Ziurtatu lan-eremua oztopoetatik eta arrisku potentzialetatik libre dagoela.
• Use only the specified battery type (AA alkaline batteries) and ensure correct polarity.
• Kendu bateriak gailua denbora luzez erabiliko ez bada, isuriak saihesteko.
• Babestu gailua muturreko tenperaturetatik, hezetasunetik eta eguzki-argia zuzenean jasotzetik.

3. Paketearen edukia

Paketatzean, egiaztatu behean zerrendatutako elementu guztiak daudela eta kalterik gabe daudela:

• STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level
• Eramateko poltsa leuna
• L-Bracket (Magnetic Mounting Bracket)
• 4 x AA pila alkalinoak
• Laser Target Plate (if included, often a small white plate)
• Erabiltzailearen eskuliburua (dokumentu hau)

1. irudia: Contents of the STANLEY FATMAX FMHT77586-1 package, including the laser level, carrying pouch, L-bracket, and batteries.

4. Produktua amaitu daview

The STANLEY FATMAX FMHT77586-1 is a robust and accurate cross line laser level designed for professional and DIY applications. Key features include:

• Green Laser Diode: Utilizes a 510-530 Nm Class 2 green laser for enhanced visibility.
• Wide Cross Line Projection: Projects a 150° wide cross line, offering extensive surface coverage.
• Self-Leveling System: Automatically levels within a 4° range in approximately 5 seconds.
• Pendulum Lock: Secures the pendulum during transport to prevent damage and allows for manual mode operation for angled lines.
• Oinarri magnetikoa: Features a magnetic base for direct attachment to metal structures.
• Hargailu modua: A dedicated button activates receiver mode, extending the working range up to 50 meters with an optional laser receiver.
• Eraikuntza iraunkorra: Rubber-coated housing provides IP54 protection against dust and splashing water.
• Muntatzeko aukerak: Equipped with 1/4" and 5/8" tripod threads for versatile mounting.

2. irudia: Aldeko profile of the laser level, showcasing its durable design.

5. Konfigurazioa

5.1 Bateriaren instalazioa

1. Locate the battery compartment cover on the back or bottom of the laser level.
2. Ireki estalkia irristatuz edo askatuz.
3. Sartu 4 AA pila alkalino, konpartimentuaren barruan adierazten den polaritate zuzena (+/-) ziurtatuz.
4. Itxi bateriaren konpartimenduaren estalkia ondo.

5.2 Mounting the Laser Level

The FMHT77586-1 offers several mounting options:

• Azalera laua: Place the laser level directly on a stable, flat surface.
• Tripodearen muntaketa: Attach the laser level to a tripod using the 1/4" or 5/8" thread on the bottom of the unit.
• Muntaketa magnetikoa: Use the included L-bracket to attach the laser level to metal surfaces. The L-bracket has strong magnets for secure attachment.

3. irudia: Laser level mounted using an L-bracket, projecting a horizontal line for alignment.

6. Funtzionamendu-argibideak

6.1 Piztea eta auto-mailatze modua

1. Unlock the pendulum by sliding the lock switch to the unlocked position.
2. Press the power button (usually marked with a power symbol) to turn on the laser level.
3. The laser level will automatically begin self-leveling. This typically takes about 5 seconds.
4. Once leveled, the laser lines will emit a steady green light. If the device is outside its 4° self-leveling range, the laser lines may flash or an indicator light may illuminate, signaling that the device needs to be repositioned.

6.2 Switching Laser Modes

Press the mode button (often marked with a laser symbol or 'M') to cycle through different laser line configurations:

• Horizontal Line Only
• Vertical Line Only
• Cross Line (Horizontal and Vertical)

4. irudia: Interacting with the control panel to select laser modes.

6.3 Eskuzko modua (pendulu blokeatua)

To project angled lines, keep the pendulum locked. When the pendulum is locked, the self-leveling function is deactivated, and the laser lines can be projected at any angle. The laser lines may flash to indicate that it is in manual mode and not self-leveling.

6.4 Hartzaile modua

For outdoor use or in bright conditions, activate receiver mode by pressing the dedicated receiver button (often marked with a signal icon). This increases the pulse rate of the laser, allowing it to be detected by an optional laser receiver for extended range (up to 50m). An indicator light will typically confirm receiver mode is active.

5. irudia: Laser level in operation, projecting precise green cross lines for measurement.

6.5 Itzaltzea

To turn off the laser level, press the power button again. Always engage the pendulum lock before storing or transporting the device to protect the internal mechanism.

7. Mantentzea

• Garbiketa: Wipe the laser level with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the laser apertures are clean for optimal beam clarity.
• Biltegiratzea: Store the device in its carrying pouch in a dry, cool place, away from direct sunlight. Always engage the pendulum lock before storage.
• Bateria zaintzea: Remove batteries if the device will not be used for an extended period to prevent corrosion from battery leakage.
• Kalibrazioaren egiaztapena: Periodically check the calibration of your laser level. Refer to the full product manual or STANLEY FATMAX support for detailed calibration procedures if needed.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

STANLEY FATMAX products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official STANLEY FATMAX webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.

For further assistance, please contact STANLEY FATMAX customer service.