Nerf AR-L

Nerf Fortnite AR-L Elite Dart Blaster Instruction Manual

Model: AR-L (E6158)

Sarrera

This manual provides essential instructions for the safe and proper use, assembly, and maintenance of your Nerf Fortnite AR-L Elite Dart Blaster. Please read all instructions carefully before operating the blaster.

Segurtasun Informazioa

OHARRA: ITOARAZTEKO ARRISKUA – Pieza txikiak sor daitezke. Ez da 3 urtetik beherako haurrentzat.

WARNING: Do not aim at eyes or face. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.

Erabilerarako gomendatutako adina: 8 urtetik aurrera.

Kutxan dagoena

Egiaztatu osagai guztiak daudela:

  • 1 x Nerf Fortnite AR-L Elite Dart Blaster
  • 1 x 10-Dart Clip
  • 20 x Official Nerf Elite Darts
  • Argibide eskuliburua
Nerf Fortnite AR-L Blaster, 10-dart clip, and 20 darts

Image: The Nerf Fortnite AR-L blaster, its detachable 10-dart clip, and a package of 20 blue Nerf Elite darts with purple tips.

Konfigurazioa

1. Bateriaren instalazioa

The blaster requires 4 x 1.5V AA alkaline batteries (not included). A Phillips/cross head screwdriver is required.

  1. Locate the battery compartment on the left side of the blaster.
  2. Askatu bateriaren konpartimentuaren estalkia.
  3. Sartu 4 AA bateria, polaritate zuzena ziurtatuz (+/-).
  4. Jarri estalkia eta estutu torlojua.
Diagram showing battery installation, dart loading, and firing steps

Image: A diagram illustrating the battery installation process using a screwdriver, followed by dart loading into the clip, and then inserting the loaded clip into the blaster.

2. Dart Loading

  1. Take the 10-dart clip.
  2. Insert one dart at a time into the clip until it is full. Do not overfill.

3. Clip Insertion

  1. Hold the blaster with one hand.
  2. Insert the loaded 10-dart clip into the magazine well on the underside of the blaster until it clicks securely into place.
Hands inserting a dart clip into the Nerf Fortnite AR-L blaster

Image: A person's hands demonstrating the proper way to insert the dart clip into the blaster's magazine well.

Blasterra erabiltzea

1. Powering On and Firing

Ensure the access door is fully closed and the clip is inserted completely.

  1. Hold the blaster firmly.
  2. Press and hold the acceleration button (located below the trigger) to power up the motor. You will hear a whirring sound.
  3. While holding the acceleration button, pull the trigger to fire a dart.
  4. Release the trigger to stop firing. Release the acceleration button to power down the motor.
Person firing the Nerf Fortnite AR-L blaster, with a dart in mid-air

Image: A person demonstrating firing the Nerf Fortnite AR-L blaster, with a dart visibly launched from the barrel.

2. Reloading

  1. When the clip is empty, press the clip release button (located in front of the trigger guard).
  2. Remove the empty clip from the blaster.
  3. Load new darts into the clip as described in the 'Dart Loading' section.
  4. Insert the reloaded clip back into the blaster until it clicks.
Diagram showing clip release and flip-up sight operation

Image: A diagram illustrating how to press the clip release button to remove the dart clip, and how to flip up and down the front and rear sights.

3. Using Flip-Up Sights

The blaster features two flip-up sights for aiming:

  • To deploy the sights, gently push them upwards until they lock into position.
  • To fold them down, push them back into their recessed positions.

Mantentzea

1. Clearing Dart Jams

If a dart becomes jammed:

  1. Release the acceleration button and remove your finger from the trigger.
  2. Open the access door on the side of the blaster.
  3. Carefully remove any jammed darts.
  4. Close the access door completely. The blaster will not fire if the access door is open.
Diagram showing how to clear a dart jam and proper blaster storage

Image: A diagram detailing the steps to clear a dart jam by opening the access door and removing the dart, and a recommendation for storing the blaster without darts in the clip.

2. Biltegiratzea

To maintain optimal performance, store the blaster without darts loaded in the clip.

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Blaster does not fire.
  • Bateriak gutxi daude edo gaizki instalatuta daude.
  • Access door is not fully closed.
  • Dart clip is not fully inserted.
  • Dardoen marmelada.
  • Replace batteries or check installation.
  • Ensure access door is securely closed.
  • Sakatu klipa ondo klik egin arte.
  • Clear any dart jams (see Maintenance section).
Darts are not firing properly or have reduced range.
  • Worn or damaged darts.
  • Dardoen marmelada.
  • Bateria baxuak.
  • Use new, official Nerf Elite darts.
  • Clear any dart jams.
  • Ordeztu bateriak.

Zehaztapenak

  • Produktuaren neurriak: 2.63 x 31 x 13.25 hazbete
  • Elementuaren pisua: 2.2 kilo
  • Modelo zenbakia: E6158
  • Fabrikatzaileak gomendatutako adina: 8 urtetik gora
  • Pilak: 4 x AA bateria behar dira (ez daude barne)
  • Argitaratze data: 22ko martxoaren 2019a
  • Fabrikatzailea: Hasbro

Bermea eta Laguntza

For warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Nerf webgunea. Gorde erosketa-agiria berme-erreklamazioetarako.

© 2025 Nerf. All rights reserved. Fortnite is a trademark of Epic Games, Inc.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.