Sarrera
This manual provides comprehensive instructions for the installation, operation, and maintenance of your A. O. Smith AO-US-200 2-Stage Under Sink Water Filter System. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. This system is designed to provide clean, filtered drinking water directly from a dedicated faucet.
Segurtasun informazio garrantzitsua
Always follow basic safety precautions when installing or maintaining this product to reduce the risk of fire, electric shock, or injury to persons. Keep this manual for future reference.
- Itzali ur-hornidura nagusia instalazioa egin aurretik.
- Do not install the system where it will be exposed to freezing temperatures.
- Ziurtatu konexio guztiak ondo finkatuta daudela ihesak saihesteko.
- Use only genuine A. O. Smith replacement filters.
Kutxan dagoena
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- AO-US-200 Filter Unit
- Txorrota
- Filter Cartridge Set (2 cartridges)
- Giltza
- Hodiak
- 1/4" Brass Tee
- Mounting Screws with Anchors
- Faucet Installation Hardware (spacers, nuts, washers)
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | AO-US-200 |
| Iragazkia Stages | 2-Stage Claryum Filtration |
| Iragazi Bizitza | 6 months / 500 Gallons |
| Kutsatzaileen murrizketa | Reduces up to 99% of 78 contaminants including Lead, PFAS, Chlorine, Mercury, Asbestos, Pharmaceuticals, Chloramine |
| Ziurtagiriak | NSF/ANSI Standards 42, 53, and 401 (WQA Tested & Certified) |
| Emaria | 0.5 litro minutuko |
| Materiala | Karbono blokea |
| Neurriak (gutxi gorabehera) | Altuera: 9 in (22.9 cm), Zabalera: 8.25 in (21 cm), Hondoera: 4.25 in (10.2 cm) |
Konfigurazioa eta instalazioa
1. Instalazio aurreko egiaztapen-zerrenda
- Beharrezko tresnak: Adjustable wrench, measuring tape, pencil, Phillips head screwdriver, hammer, variable speed drill with 7/32" bit, level.
- Lekua: Select a space under your sink that is at least 12 inches from the bottom of your cabinet and allows for easy access to a cold water supply line.
- Faucet Placement: The dedicated faucet may be mounted on the sink using an existing hole (e.g., for a sprayer nozzle or soap dispenser) or by drilling a new hole no more than 1/2 inch in diameter. Ensure the faucet's spout extends slightly past the edge of the sink. Note: We recommend using an approved or certified professional if drilling is required.
2. Connecting to Cold Water Supply
- Itxi zure konketako ur hotzaren hornidura.
- Disconnect the cold water supply line from the shut-off valve.
- Attach the threaded end of the 1/4" brass tee to the cold water shut-off valve.
- Connect the cold water supply line to the top of the brass tee.
- Tighten all connections using an adjustable wrench.
3. Txorrotaren instalazioa
- Insert the faucet stem through the chosen hole in your sink.
- From underneath the sink, slide the faucet rubber washer, faucet washer, and faucet spacer onto the faucet stem.
- Secure the faucet with the faucet nut, tightening it with a wrench to ensure it is secure to the sink.
4. Mounting the Filter Unit
- Temporarily position the filter unit under the sink in your chosen location.
- Markatu muntatzeko zuloak arkatz batekin.
- Drill pilot holes at the marked locations. If mounting into drywall, insert the provided drywall anchors.
- Mount the unit to the wall using the provided screws.
5. Lotura-hodiak
- Connect one end of the provided tubing to the open port on the brass tee. Ensure the plastic tube insert and brass nut are correctly installed for a secure, leak-free connection.
- Insert the other end of this tubing completely into the 'IN' port of the filter unit.
- Connect another piece of tubing to the faucet stem. Ensure the chrome nut and plastic collar are correctly installed.
- Insert the other end of this tubing completely into the 'OUT' port of the filter unit.
6. Initial System Flush
- Slowly turn on the cold water supply.
- Open the dedicated filtered water faucet and allow water to run for 10 minutes to flush the system. This removes air and carbon fines.
- Egiaztatu konexio guztiak ihesik dagoen. Beharrezkoa bada, estutu.
Video 1: Official A. O. Smith AO-US-200 Installation Guide. This video provides a visual walkthrough of the installation process for the 2-stage under sink water filter system.
Zure sistema eragilea
Once installed and flushed, your A. O. Smith AO-US-200 system is ready for use. Simply open the dedicated filtered water faucet to dispense clean, filtered water. The system filters water at a rate of 0.5 gallons per minute, suitable for families of 1 to 4 people.
Maintenance: Filter Replacement
For optimal performance, replace your filter cartridges every 6 months or after 500 gallons of use, whichever comes first. The system is designed for easy, tool-free filter replacement.
Iragazketa Teknologia
Iragazkiak ordezkatzeko urratsak
- Turn off the cold water supply to the system.
- Open the filtered water faucet to relieve pressure and drain any remaining water.
- Twist the old filter cartridges counter-clockwise to remove them from the unit housing.
- Discard the old filters.
- Insert new filter cartridges into the unit housing, aligning the connection points.
- Push the new filters up and twist clockwise until they are securely locked into place.
- Slowly turn on the cold water supply.
- Open the filtered water faucet and allow water to run for 10 minutes to flush the new filters.
- Egiaztatu ihesak.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Konexioetako ihesak. | Loose fittings, missing O-rings, improper tubing insertion. | Ensure all nuts are tightened, check for properly seated O-rings, re-insert tubing fully into quick-connect fittings. Using plumber's tape on threaded connections can help. |
| Ur-emari baxua txorrotatik | Clogged filters, kinked tubing, low incoming water pressure. | Replace filters if they are past their service life. Check tubing for kinks. Verify adequate household water pressure. |
| Unpleasant taste/odor | Filters are exhausted, initial carbon fines not fully flushed. | Replace filters. Flush the system for an extended period (e.g., 15-20 minutes) after filter replacement. |
| Filter change indicator not working | Battery needs replacement. | Replace the battery in the filter unit's indicator. |
Bermearen informazioa
A. O. Smith provides a limited warranty for this product. Please refer to the warranty card included with your purchase or visit the official A. O. Smith webwebgunean baldintza zehatzak ikusteko. Gorde erosketaren frogagiria bermearen erreklamazioetarako.
Bezeroarentzako Arreta
If you have any questions, require assistance with installation, or need to order replacement parts, please contact A. O. Smith Customer Support:
- Webgunea: www.aosmith.com
- Telefonoa: Refer to your product packaging or the A. O. Smith webkontaktu zenbaki eguneratuenak lortzeko gunea.





