Timex TW4B17400 Analog-Digital Watch Instruction Manual

Sarrera

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Timex TW4B17400 Analog-Digital Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. Keep this manual for future reference.

Produktua amaituview

The Timex TW4B17400 is a men's analog-digital watch featuring a black dial and a brown leather strap. It combines traditional analog timekeeping with digital functionalities.

Ezaugarri nagusiak:

• Ordu analogiko eta digitalaren pantaila
• Durable Leather Strap
• Indiglo Night-Light
• Chronograph Functionality
• Alarma Funtzioa

Erlojuaren osagaiak:

Ezagutu zure erlojuaren osagai nagusiak:

Irudia: Albokoa view of the Timex TW4B17400 watch. This image displays the watch case from the side, highlighting the crown (center knob) and two pushers (buttons) on either side of the crown, used for adjusting time and accessing digital functions. The brown leather strap is also visible.

• Koroa: Ordu analogikoa ezartzeko erabiltzen da.
• Sakatzaileak (botoiak): Used for operating digital functions such as setting digital time, date, alarm, and chronograph.
• Markatu: Displays analog time and includes a digital display window.
• Uhala: Brown leather strap with a buckle closure.

Image: Close-up of the brown leather strap and black buckle of the Timex TW4B17400 watch. The detailed stitching on the leather and the two strap loops are clearly visible.

Konfigurazioa

Battery Installation (If Required):

Your watch comes with a CR2 battery installed. If the watch is not functioning, the battery may need to be replaced. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and water resistance.

Ordu analogikoa ezartzea:

1. Pull the crown (center knob) out to the furthest position.
2. Biratu koroa erlojuaren orratzen noranzkoan edo kontrako noranzkoan orduko eta minutuko orratzak ordu zuzenean mugitzeko.
3. Ordua ezarri ondoren, bultzatu koroa bere jatorrizko posiziora erlojuaren mugimendua abiarazteko.

Ordu eta data digitala ezartzea:

The digital functions are typically controlled by the pushers. Refer to the specific instructions below for common digital settings. The exact sequence may vary slightly; consult the full Timex manual for your movement if detailed steps are needed.

1. Press the MODE button (usually one of the side pushers) repeatedly until the digital display shows the time setting mode (often indicated by flashing digits).
2. Use the SET/ADJUST button (another pusher) to select the digit you wish to change (e.g., hours, minutes, 12/24-hour format).
3. Use the START/STOP button (another pusher) to increase the value of the flashing digit.
4. Errepikatu 2. eta 3. urratsak minutuetarako, urterako, hilabeterako eta egunerako.
5. Once all settings are correct, press the MODE button to exit the setting mode.

Funtzionamendua

Reading Analog Time:

The hour and minute hands indicate the current time in a traditional format.

Using Digital Functions:

• Modu botoia: Cycles through different digital modes (Time, Date, Alarm, Chronograph, Timer).
• Set/Adjust Button: Used to select items for adjustment within a mode.
• Hasi / Gelditu botoia: Used to start/stop functions (e.g., chronograph) or increment values during setting.

Indiglo Night-Light:

To illuminate the watch face in low-light conditions, press and hold the crown or a designated pusher (refer to your watch's specific button layout). The Indiglo feature will light up the dial for a few seconds.

Alarma funtzioa:

1. Press the MODE button until the alarm mode is displayed.
2. Use the SET/ADJUST button to select the hour or minute to set.
3. Use the START/STOP button to change the alarm time.
4. Press the MODE button to confirm and exit.
5. To activate/deactivate the alarm, typically press a specific pusher while in alarm mode.

Kronografoa (kronografoa):

1. Press the MODE button until the chronograph mode is displayed (usually shows 00:00:00).
2. Press the START/STOP button to start timing.
3. Press the START/STOP button again to stop timing.
4. Press the RESET button (often the same as SET/ADJUST) to clear the chronograph to zero.

Mantentzea

Erlojua garbitzea:

Wipe the watch case and crystal with a soft, damp oihal. Larruzko uhalarentzat, erabili oihal lehor eta leun bat. Saihestu produktu kimiko gogorrak edo material urratzaileak erabiltzea, hauek erlojuaren akabera edo uhala kaltetu baitezakete.

Uraren erresistentzia:

While your watch may be water-resistant, it is not waterproof. Avoid prolonged exposure to water, such as swimming or showering, unless the specific water resistance rating (e.g., 50m, 100m) is clearly indicated on the watch and suitable for such activities. Always ensure the crown is pushed in completely to maintain water resistance.

Leather Strap Care:

Leather straps can be affected by moisture, sweat, and direct sunlight. To prolong the life of your leather strap:

• Saihestu urarekiko esposizio luzea.
• Garbitu zapi lehor eta leun batekin.
• Allow the strap to air dry if it gets wet; do not use direct heat.
• Avoid contact with cosmetics, oils, and perfumes.

Arazoak konpontzea

Erlojua ez dabil / Pantaila digitala hutsik:

• Egiaztatu koroa guztiz sartuta dagoen.
• The battery may need replacement. Consult a professional watch technician.

Orduaren bistaratzea okerra:

• Refer to the "Setting Analog Time" and "Setting Digital Time and Date" sections to reset the time.
• Ensure the watch has not been exposed to strong magnetic fields, which can affect accuracy.

Indiglo Not Working:

• Ziurtatu bateria nahikoa potentzia duela.
• Confirm you are pressing the correct button for Indiglo activation.

Zehaztapenak

Bermea eta Laguntza

Bermeari eta bezeroarentzako laguntzari buruzko informazioa lortzeko, jo Timex-en webgune ofizialera. website or the warranty card included with your purchase. Keep your proof of purchase for any warranty claims.

For further assistance, you may visit the official Timex support page: Timex Laguntza