Hayward TigerShark QC Robotic Pool Cleaner Instruction Manual

1. Sarrera

This manual provides essential information for the safe and efficient operation and maintenance of your Hayward TigerShark QC Robotic Pool Cleaner. Please read all instructions carefully before using the cleaner to ensure optimal performance and longevity of the product.

The Hayward TigerShark QC is designed for in-ground pools up to 20 x 40 ft, offering advanced cleaning of the pool floor, walls, coves, and waterline. It features an exclusive 90-minute Quick Clean cycle for rapid cleaning and a standard 4-hour complete cycle.

1.1. irudia: Aurrealdea view of the Hayward TigerShark QC Robotic Pool Cleaner.

2. Segurtasun informazioa

Beti jarraitu segurtasun neurri hauek lesio edo kalte arriskua murrizteko:

• Read and follow all instructions in this manual and on the cleaner itself.
• Do not operate the cleaner if the power cord is damaged. Contact customer support for replacement.
• Ziurtatu energia-iturria lurrera konektatutako entxufe batera konektatuta dagoela.
• Never enter the pool while the cleaner is operating.
• Deskonektatu beti energia-iturria mantentze-lan edo garbiketa-lanak egin aurretik.
• Keep the power supply unit away from the pool edge to prevent it from falling into the water.
• Tresna hau ez da gaitasun fisiko, sentsorial edo mental murriztua duten pertsonek edo esperientzia eta ezagutza falta duten pertsonek erabiltzeko, baldin eta haien segurtasunaz arduratzen den pertsona batek gailuaren erabilerari buruzko gainbegiratu edo jarraibiderik eman ez badu.

3. Produktua amaitu daview

The Hayward TigerShark QC Robotic Pool Cleaner is an automatic pool vacuum designed for efficient and thorough cleaning. Key features include:

• Microprocessor-Based Technology: Ensures comprehensive coverage of pool surfaces.
• Quick Clean Cycle: An exclusive 90-minute cycle for fast cleaning.
• Ziklo osoa: A standard 4-hour cycle for thorough cleaning.
• On-Board Pump: Provides powerful vacuum suction for debris pickup.
• Simple Filter Cartridge: Easy to access and clean for hassle-free maintenance.
• Eragiketa independentea: Runs separately from the pool's filtration system, requiring no extra hoses or pumps.
• Energia eraginkorra: Powered by an efficient 24-volt motor.

Image 3.1: The TigerShark QC effectively cleans pool floor, walls, coves, and waterline.

4. Konfigurazioa

Follow these steps to set up your Hayward TigerShark QC Robotic Pool Cleaner:

1. Garbigailua despaketatzea: Carefully remove the cleaner and its components from the packaging.
2. Konektatu elikadura iturria: Connect the floating cable from the cleaner to the power supply unit. Ensure the connection is secure.
3. Elikatze-iturriaren posizioa: Place the power supply unit at least 10 feet (3 meters) from the edge of the pool. Ensure it is in a dry, shaded area and connected to a properly grounded 115-volt outlet.
4. Place Cleaner in Pool: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure the floating cable is untangled and has enough slack to reach all areas of the pool.

Image 4.1: The cleaner can be easily transported and set up using a caddy (sold separately).

Image 4.2: The cleaner operates without charging, connecting directly to a power source.

5. Funtzionamendu-argibideak

Once the cleaner is properly set up and submerged in the pool, you can begin the cleaning cycle.

1. Select Cleaning Cycle: The TigerShark QC offers two cleaning modes:
   • Quick Clean (90 minutes): Ideal for a rapid touch-up of the pool floor, walls, coves, and waterline.
   • Complete Cycle (4 hours): For a thorough cleaning of the entire pool.
   Refer to the power supply unit for cycle selection.
2. Hasi garbitzen: Press the appropriate button on the power supply unit to start the desired cleaning cycle. The cleaner will begin its programmed cleaning pattern.
3. Monitorearen funtzionamendua: Allow the cleaner to complete its cycle. It will automatically shut off once the cycle is finished.
4. Retrieve Cleaner: After the cycle is complete and the cleaner has shut off, gently pull the floating cable to bring the cleaner to the surface. Use the handle to lift it out of the water. Avoid pulling the cleaner out of the water by its cable.

Image 5.1: The cleaner offers both a 90-minute Quick Clean and a 4-hour complete cycle.

6. Mantentzea

Regular maintenance ensures the longevity and optimal performance of your pool cleaner.

1. Empty and Rinse Filter Cartridge: After each cleaning cycle, or as needed, remove the filter cartridge from the cleaner. Open the cleaner, remove the cartridge, and rinse it thoroughly with a garden hose to remove all debris. Ensure the cartridge is clean before reinserting it.
2. Rinse Cleaner: After removing the filter, rinse the exterior of the cleaner with clean water to remove any pool chemicals or debris.
3. Ikuskatu kablea: Periodically inspect the floating cable for any tangles or damage. Untangle the cable as needed to prevent kinks.
4. Biltegiratzea: When not in use, store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly coiled to prevent damage.

Image 6.1: The filter cartridge is easily removed and rinsed for simple maintenance.

7. Arazoak

If you encounter issues with your Hayward TigerShark QC, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact Hayward Customer Support.

8. Zehaztapenak

Image 8.1: Key dimensions and weight of the TigerShark QC cleaner.

9. Bermearen informazioa

The Hayward TigerShark QC Robotic Pool Cleaner comes with a Berme mugatua. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.

10. Bezeroarentzako arreta

For technical assistance, replacement parts, or warranty inquiries, please contact Hayward Customer Support:

• Webgunea: Visit the official Hayward weblaguntza baliabideen eta harremanetarako informazioaren gunea.
• Telefonoa: Refer to your product packaging or the Hayward webbezeroarentzako arreta-zerbitzuko telefono-zenbaki eguneratuenen webgunea.

When contacting support, please have your product model number (W3RC9990CUB) and serial number ready.