Extreme Networks Summit X460-24p Managed Switch User Manual

Sarrera

This manual provides instructions for the Extreme Networks Summit X460-24p, a high-performance, managed Layer 3 Ethernet switch designed for enterprise and data center environments. It features 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, along with additional SFP and shared Gigabit SFP ports for flexible connectivity.

Segurtasun Informazioa

Segurtasun Jarraibideak

• Always disconnect all power supply inputs before removing any panel for servicing.
• This device contains a Class 1 Laser product. Avoid direct eye exposure to beam.
• Instalazioan zehar lurreratzea egokia ziurtatu.
• Refer to the installation manual for power cord selection and additional compliance markings.

Paketearen edukia

Kutxan dagoena

• Extreme Networks Summit X460-24p Switch
• Elikatze-kablea (eskualdearen araberakoa)
• Rack muntatzeko kit
• Dokumentazioa (eskuliburu hau)

Produktua amaituview

The Summit X460-24p switch is designed for efficient network management and high-speed data transfer.

Atzeko panela

This image displays the rear panel of the Summit X460-24p switch, highlighting the power input, fan modules, and the SummitStack ports. The overall chassis is purple.

Xehetasun bat view of the SummitStack ports (Stack Port 1 and Stack Port 2) located on the rear of the switch, used for stacking multiple switches.

Produktuen etiketa

This label provides critical identification information for the switch, including Model: 16403, Summit X460-24p, System No.: 800323-00-03, and Serial No.: 1052G-03941.

Aukerako osagaiak

This image shows the label for an optional Extreme Networks Summit 750W PoE AC Power Supply Unit (PSU), Model 10931, System No. 800382-00-03, Serial No. 1053A-41986.

This image displays the label for an optional Extreme Networks SummitStack Module, Model 16419, System No. 800384-00-01, Serial No. 1122G-02565.

Konfigurazioa

Instalazio Gida

Rack Muntaketa

The Summit X460-24p is designed for standard 19-inch rack mounting. Use the provided rack-mounting kit to secure the switch in a server rack. Ensure adequate ventilation around the unit.

Potentzia konektatzea

Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet. The switch will power on automatically.

Sareko kableak konektatzea

• Connect Ethernet cables from your network devices to the 24 10/100/1000Base-T PoE ports on the front panel.
• For uplink or fiber connections, use the SFP or shared Gigabit SFP ports.
• For stacking, connect SummitStack ports on multiple switches using appropriate stacking cables.

Initial Configuration Access

Access the switch's management interface via a console cable connected to the console port, or through a web browser if the switch has a default IP address configured. Refer to the Extreme Networks documentation for detailed initial setup procedures.

Funtzionamendu-argibideak

Oinarrizko Funtzionamendua

Piztu/Itzali

The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For proper shutdown, it is recommended to use the software-based shutdown command if available.

LED adierazleak

Observe the LED indicators on the front panel for status information regarding power, system health, port activity, and PoE status. Consult the full product documentation for a detailed explanation of each LED's behavior.

Kudeaketa interfazea

The switch can be managed via a Command Line Interface (CLI) accessible through the console port or Telnet/SSH, or through a web-based graphical user interface (GUI).

Mantentzea

Zainketa eta Mantentzea

Garbiketa

Keep the switch clean and free of dust. Use a soft, dry cloth for external cleaning. Do not use liquid or aerosol cleaners.

Firmware eguneraketak

Periodically check the Extreme Networks support webfirmware eguneratzeetarako gunea errendimendu eta segurtasun optimoa bermatzeko. Jarraitu firmware eguneratze prozeduretarako emandako argibideei.

Fan and Power Supply Modules

The switch may feature hot-swappable fan and power supply modules. Refer to the Extreme Networks documentation for instructions on replacement if necessary.

Arazoak konpontzea

Gai arruntak

Botererik ez

• Ziurtatu elikatze-kablea ondo konektatuta dagoela bai etengailura bai entxufera.
• Egiaztatu korronte-hartunea funtzionala dela.

Port Link Down

• Egiaztatu Ethernet kablearen konexioa bi muturretan.
• Ziurtatu konektatutako gailua piztuta dagoela eta behar bezala funtzionatzen duela.
• Check the port status via the management interface.

Sarearen konexio arazoak

• Verify IP configuration and network settings.
• Check for conflicting IP addresses.
• Consult network diagnostics tools.

Zehaztapenak

Zehaztapen Teknikoak

Bermea eta Laguntza

Bermearen informazioa

This product typically comes with a 90-day limited warranty. For specific warranty terms and conditions, please refer to the official Extreme Networks warranty statement or contact your vendor.

Laguntza Teknikoa

For technical assistance, visit the official Extreme Networks support website or contact their customer service. Have your product model and serial number ready when seeking support.