SUNMI T2 Smart POS Terminal with Integrated Printer User Manual

1. Sarrera

This manual provides essential instructions for the setup, operation, and maintenance of your SUNMI T2 Smart POS Terminal. The T2 is an integrated point-of-sale device featuring a 15.6-inch Full HD touch screen and a built-in thermal printer, designed for various commercial applications.

2. Produktua amaitu daview

2.1 Gailuaren osagaiak

The SUNMI T2 terminal integrates a high-resolution display, a powerful processor, and a thermal printer into a single unit. Key components include:

• 15.6-inch Full HD Touch Screen (1920x1080)
• Integrated Thermal Printer (80mm paper width, 200mm/s print speed)
• Base Unit with connectivity ports
• Potentzia Sarrera

2.1. irudia: Aurrealdea view of the SUNMI T2 Smart POS Terminal. The 15.6-inch touch screen is visible, displaying various application icons, indicating its Android operating system interface.

2.2. irudia: Aldea view of the SUNMI T2 terminal, illustrating the design of the stand and the adjustable angle of the main display unit.

2.2 Paketearen edukia

Paketatzean, egiaztatu elementu guztiak bertan daudela:

• SUNMI T2 Printer (T2 model)
• Elikatze-kablea
• Erabiltzailearen eskuliburua (dokumentu hau)

3. Konfiguratzeko argibideak

3.1 Desontziratzea eta kokatzea

1. Carefully remove the SUNMI T2 terminal from its packaging.
2. Place the device on a stable, flat surface, ensuring adequate ventilation around the unit.
3. Avoid placing the device near heat sources, direct sunlight, or in areas with high humidity or dust.

3.2 Energia-konexioa

1. Connect the provided power cable to the power input port located at the rear of the device base.
2. Entxufatu kablearen beste muturra entxufe elektriko estandar batera.
3. The device will typically power on automatically or can be powered on using the power button.

3.3 Hasierako piztea eta konfigurazioa

1. Press and hold the power button (refer to Section 5.1 for button location) until the screen illuminates.
2. Follow the on-screen prompts to complete the initial setup, including language selection, Wi-Fi connection, and time zone settings.
3. Connect to your local network via Wi-Fi or Ethernet (if available) to ensure proper functionality and updates.

4. Funtzionamendu-argibideak

4.1 Ukipen-pantailaren funtzionamendua

The SUNMI T2 features a capacitive multi-touch screen. Operate the device using standard touch gestures:

• Sakatu: Hautatu elementuak edo aktibatu funtzioak.
• Pasatu hatza: Navigate through menus or scroll content.
• Zoom egiteko apur bat egin: Adjust the size of on-screen content.

4.2 Integrated Printer Operation

The T2 includes an 80mm thermal printer for receipts and order tickets.

4.2.1 Loading Printer Paper

1. Locate the printer cover on the front of the device base.
2. Press the release button or latch to open the printer cover.
3. Insert a new roll of 80mm thermal paper, ensuring the paper feeds from the bottom and the leading edge extends slightly out of the printer slot.
4. Itxi inprimagailuaren estalkia ondo, bere lekuan klik egin arte.
5. Tear off any excess paper.

4.1. irudia: Xehetasuna view of the integrated thermal printer compartment with the cover open, illustrating the correct method for inserting a new 80mm thermal paper roll.

4.2. irudia: Barnekoa view of the SUNMI T2's thermal printer mechanism, highlighting its design for efficient paper handling and high-speed printing up to 200mm/s.

4.2.2 Ordainagiriak inprimatzea

Once paper is loaded, the printer will automatically activate when a print command is issued from your POS software application. Ensure your application is correctly configured to use the integrated printer.

4.3 Konektibitatea

The SUNMI T2 supports various connectivity options:

• Wi-Fi: 2.4G/5G (IEEE 802.11 a/b/g/n) for wireless network access.
• Bluetootha: Supports Bluetooth 2.1/3.0/4.0 (BLE) for connecting peripherals.
• USB atakak: USB Type A port x1, USB 3.1 Type C x1, USB 2.0 x2 (total 3 USB ports).
• RJ11: Cash drawer port x1.
• RJ45: LAN port x1 for wired network connection.
• Aurikularrak Jack: 3.5 mm-ko audio irteera.
• Mikro-USB: Debug port x1.

Connect external devices such as barcode scanners, external keyboards, or cash drawers to the appropriate ports as needed.

5. Mantentzea

5.1 Gailua garbitzea

• Power off the device and disconnect the power cable before cleaning.
• Erabili lipurrik gabeko zapi leun bat dampened with water or a mild, non-abrasive cleaner to wipe the screen and exterior surfaces.
• Do not use harsh chemicals, abrasive pads, or excessive moisture.
• For the thermal printer head, use a specialized thermal printer cleaning pen or card to ensure optimal print quality.

5.2 Software eguneraketak

Regularly check for and install software updates for the SUNMI OS and your POS application to ensure optimal performance, security, and access to new features. Updates can typically be found in the device's settings menu or through your POS software provider.

6. Arazoak

6.1 Ohiko arazoak eta irtenbideak

• Gailua ez da pizten:
  • Ensure the power cable is securely connected to both the device and a working electrical outlet.
  • Egiaztatu korronte-hartunea funtzionala dela.
  • Try pressing and holding the power button for 10-15 seconds.
• Pantailak ez du erantzuten:
  • Berrabiarazi gailua.
  • Ziurtatu pantaila garbi eta hondakinik gabe dagoela.
• Printer is not printing:
  • Check if thermal paper is loaded correctly and not jammed.
  • Ensure the printer cover is securely closed.
  • Verify that the POS application is sending print commands and is configured for the integrated printer.
  • Berrabiarazi gailua.
• No network connection (Wi-Fi/Ethernet):
  • Check Wi-Fi settings and ensure you are connected to the correct network.
  • For Ethernet, ensure the cable is securely connected to the RJ45 port and your router/switch.
  • Restart your network equipment (router/modem).

If issues persist, refer to the support section or contact your vendor.

7. Zehaztapenak

The following table details the technical specifications of the SUNMI T2 Smart POS Terminal:

7.1 Irudia: Gainetikview of SUNMI T2 Technical Specifications, detailing hardware and software components.

8. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the vendor/manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Kunxilin Electronic CO. (Brand: SUNMI)