Sarrera
The CRAFTSMAN CMHT77637 Laser Measure Tool is a compact and accurate device designed for quick and easy distance measurements up to 40 feet. Featuring simple one-button operation and a rechargeable Lithium-Ion battery, this tool is ideal for various measuring tasks. This manual provides essential information for the safe and effective use of your laser measure.
Segurtasun Informazioa
OHARRA: This product emits a Class II laser. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Laser radiation can cause eye injury.
- Do not attempt to modify or disassemble the laser measure.
- Ez zuzendu laser izpia pertsonei edo animaliei.
- Erabili gailua eskuliburu honetan deskribatzen den helbururako soilik.
- Mantendu gailua haurren eskura.
- Operate the device in a safe environment, away from reflective surfaces that could redirect the laser beam unexpectedly.
Laser Class II @ ≤1mW @630~680 nm.
Produktua amaituview
The CRAFTSMAN CMHT77637 is a compact laser distance measurer. Its main components include:
- Laser irekidura: Laser izpia igortzen du neurketa egiteko.
- Bistaratzeko pantaila: Shows measurement readings, battery status, and units.
- Measurement Button (ON/Measure): Gailua aktibatzen du eta neurketak hasten ditu.
- USB kargatzeko ataka: For recharging the internal Lithium-Ion battery.
- Wrist Strap Loop: For attaching the included wrist strap.
1. irudia: Aurrealdea view of the CRAFTSMAN CMHT77637 Laser Measure Tool, highlighting the display and the main 'ON' measurement button.
2. irudia: Angeludun view of the CRAFTSMAN CMHT77637 Laser Measure Tool, providing a different perspective of the device's controls and screen.
Konfigurazioa
1. Bateria kargatzea
The CRAFTSMAN CMHT77637 is powered by an internal Lithium-Ion battery. Before first use, or when the battery indicator on the display shows low charge, connect the device to a USB power source using the included USB charging cable. The battery indicator on the display will show charging status and full charge.
2. Eskumuturreko uhala lotzea
For added security and to prevent accidental drops, thread the included wrist strap through the loop on the side of the device.
Funtzionamendu-argibideak
1. Piztu/Itzaltzea
- To power on the device, press the large Neurtzeko botoia once. The laser will activate, and the display will show the current measurement mode.
- Gailua automatikoki itzaliko da denbora batez inaktibo egon ondoren, bateria aurrezteko.
2. Neurketa bat egitea
- Ensure the device is powered on and the laser is active.
- Position the rear edge of the laser measure against your starting point.
- Aim the laser dot at the target point where you want to measure the distance.
- Sakatu Neurtzeko botoia again. The device will emit a short beep, and the measured distance will appear on the display.
Figure 3: Using the laser measure to determine the distance to a wooden stud. The laser dot is visible on the target.
Figure 4: Demonstrating the laser measure in action, showing the laser beam extending from the device to the measurement target.
3. Pantaila ulertzea
The display shows the measured distance in feet (ft) by default. It also indicates the battery charge level. The accuracy of the measurement is approximately +/- 1/14-inch at 30 ft.
Mantentzea
- Garbiketa: Erabili biguna, damp cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents. Ensure the laser aperture and display are kept clean for optimal performance.
- Biltegiratzea: Store the laser measure in a dry environment, away from direct sunlight and extreme temperatures.
- Bateria zaintzea: Recharge the Lithium-Ion battery regularly, even if the device is not in frequent use, to maintain battery health.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Gailua ez da pizten. | Bateria baxua edo agortuta. | Charge the device using the USB charging cable. |
| Neurri okerrak. | Laser aperture or target surface is dirty; unstable measuring position; measuring beyond range. | Clean the laser aperture. Ensure a stable measuring position. Verify the target is within the 40 ft. range. |
| Laser izpia ez da ikusten. | Bright ambient light; device not powered on. | Use in lower light conditions if possible. Ensure the device is powered on. |
Zehaztapenak
| Modelo zenbakia | CMHT77637 |
| Neurketa-eremua | Euskal 40 (12.19 m) |
| Zehaztasuna | ± 1/14-inch at 30 ft. |
| Laser Klasea | Class II, ≤1mW @630~680 nm |
| Bateria mota | Litio-Ion kargagarria |
| Kargatzen | USB kargatzeko kablea |
| Uraren Erresistentzia Maila | IP54 (Urarekiko erresistentea) |
| Dakarten osagaiak | USB Charging Cable, Wrist Strap |
| UPC | 885911574020 |
Bermea eta Laguntza
The CRAFTSMAN CMHT77637 Laser Measure Tool comes with a Full Lifetime Warranty. For detailed information regarding warranty coverage, claims, or technical support, please refer to the official CRAFTSMAN webwebgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.
Laguntza gehiago lortzeko, bisitatu www.artisau.com.
