Himimi Digital Electronic Security Safe Box User Manual

1. Sarrera

Thank you for choosing the Himimi Digital Electronic Security Safe Box. This safe is designed to provide secure storage for your valuables, including jewelry, money, cash, and important documents. It features a robust steel construction, a digital keypad for easy access, and an override key system for emergency entry. Please read this manual carefully to ensure proper setup, operation, and maintenance of your safe.

2. Paketearen edukia

Mesedez, egiaztatu paketea elementu guztiak daudela ziurtatzeko:

• 1 x Himimi Digital Electronic Security Safe Box
• 2 x Override Keys
• 1 x Erabiltzailearen eskuliburua (dokumentu hau)
• Mounting Hardware (bolts for securing the safe)

3. Konfigurazioa

3.1 Bateriaren instalazioa

The safe requires 4 AA batteries (not included) to power the digital keypad. Ensure the batteries are inserted correctly according to polarity markings.

1. Open the safe door using the override key (refer to section 4.2).
2. Bilatu bateriaren konpartimentua kutxa gotorraren atearen barrualdean.
3. Insert 4 new AA batteries, observing the correct polarity (+/-).
4. Itxi bateriaren konpartimenduaren estalkia.

1. irudia: Location of the battery compartment and code reset button inside the safe door.

3.2 Hasierako irekiera

For the first use, or if the digital code is unknown, use the override key to open the safe.

1. Locate the keyhole, usually hidden behind a small cover on the keypad panel.
2. Sartu emandako baliogabetze-giltzetako bat giltza-zuloan.
3. Biratu giltza erlojuaren norantzan kutxa gotorra desblokeatzeko.
4. While holding the key turned, rotate the knob on the keypad clockwise to open the door.

2. irudia: Two methods for opening the safe: digital code and override key.

3.3 Kutxa gotorra muntatzea

The safe can be secured to a wall or floor using the pre-drilled holes and included mounting hardware for added security.

1. Aukeratu kokapen egokia muntatzeko.
2. Markatu zulaketa puntuak kutxa gotorraren barruan aurrez zulatutako zuloen bidez.
3. Drill pilot holes into the wall or floor.
4. Align the safe with the drilled holes and secure it using the provided bolts.

4. Kutxa gotorraren funtzionamendua

4.1 Opening with Digital Code

To open the safe using the digital keypad:

1. Enter your personal 3-8 digit code (the default code is typically "1234").
2. Press the "#" button to confirm.
3. Within 5 seconds, rotate the knob on the keypad clockwise to open the safe door.

3. irudia: Entering a code on the digital keypad.

4.2 Setting a New User Code

You can change the default code to a personal code for enhanced security.

1. With the safe door open, locate and press the red reset button hidden behind the door (see Figure 1).
2. The keypad will beep, and the indicator light will flash.
3. Sartu zure 3-8 digituko kode berria.
4. Press the "#" button to confirm. The safe will beep again, indicating the new code is set.

4.3 Kutxa gotorra ixtea eta blokeatzea

Kutxa itxi eta giltzapean jartzeko:

1. Itxi seguru atea.
2. Rotate the knob on the keypad counter-clockwise until the door is securely locked.

4.4 Bideo didaktikoa

5. Mantentzea

5.1 Bateria ordezkatzea

When the battery low indicator lights up, or if the keypad becomes unresponsive, replace the batteries immediately. Always use 4 new AA batteries.

5.2 Garbiketa

To clean the safe, use a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish or electronic components.

6. Arazoak

• Safe does not open with digital code:
  Ensure batteries are fresh and correctly installed. Verify that the correct code is being entered. If the code is forgotten, use the override key to open the safe and reset the code.
• Teklatuak ez du erantzuten:
  This usually indicates low or dead batteries. Replace all 4 AA batteries.
• Override key does not work:
  Ensure the key is fully inserted and turned correctly. Do not force the key. If the lock mechanism feels stiff, a small amount of graphite lubricant can be applied to the keyhole.
• Safe door does not close properly:
  Check for any obstructions around the door frame or locking bolts. Ensure the safe is on a level surface.

7. Zehaztapenak

4. irudia: Product dimensions of the Himimi Digital Electronic Security Safe Box.

5. irudia: Detail of the double steel locking bolts and door thickness.

8. Bermea eta Laguntza

For warranty information, technical support, or any questions regarding your Himimi Digital Electronic Security Safe Box, please contact Himimi customer service. Refer to the product packaging or the Himimi official webharremanetarako datuak lortzeko gunea.