Sarrera
This manual provides instructions for the proper setup, operation, maintenance, and troubleshooting of your Orbit Heavy Duty Brass Impact Sprinkler on Tripod Base, Model 58308D. Please read these instructions carefully before using the product to ensure safe and efficient operation.
Segurtasun Informazioa
Abisua: This product contains lead, a chemical known to the State of California to cause cancer and reproductive toxicity. Wash hands thoroughly after handling.
Always ensure the sprinkler is placed on a stable, level surface to prevent tipping. Do not operate the sprinkler near electrical outlets or equipment. Keep children and pets away from the operating sprinkler.
Produktua amaituview
The Orbit Heavy Duty Brass Impact Sprinkler on Tripod Base is designed for efficient and wide-area watering. It features a durable brass impact sprinkler head mounted on an adjustable tripod for versatile placement and coverage.

1. irudia: Osoa view of the Orbit Brass Impact Sprinkler on Tripod Base.
Konfigurazioa
- Deskonprimitu osagaiak: Carefully remove all components from the packaging. Ensure you have the brass impact sprinkler head and the tripod base.
- Tripodea muntatu: Extend the legs of the tripod base to a stable position. The tripod is adjustable from 25 inches to 48 inches in height. Secure the legs using the locking mechanisms.
- Attach Sprinkler Head: Screw the brass impact sprinkler head onto the threaded connection at the top of the tripod base. Hand-tighten until secure.
- Konektatu ur-hodia: Attach a standard garden hose to the inlet connection at the base of the tripod. Ensure a tight connection to prevent leaks.
- Ihinztagailuaren kokapena: Place the assembled sprinkler in the desired watering area. Ensure the tripod legs are fully extended and stable on the ground.

Figure 2: Close-up of the tripod leg adjustment and locking mechanism.

Figure 3: Detail of the garden hose connection point on the tripod base.

Figure 4: The Orbit sprinkler fully assembled and connected to a hose on a lawn.
Funtzionamendu-argibideak
- Ura piztu: Slowly turn on the water supply to the garden hose.
- Uraren presioa doitu: Adjust the water pressure at the faucet to achieve the desired spray distance and pattern. The sprinkler is designed to operate effectively within typical residential water pressures.
- Monitorearen estaldura: Observe the watering pattern to ensure adequate coverage of your desired area.
Egokitzapenak
The brass impact sprinkler head allows for adjustments to both the spray pattern and distance:
- Spray Distantzia: The sprinkler can reach up to 100 feet in diameter. Adjust the diffuser screw on the sprinkler head to change the water stream's break-up and thus the spray distance. Tightening the screw will shorten the distance, while loosening it will increase it.
- Spray Pattern (Partial to Full Circle): The sprinkler can be set for a partial or full 360-degree circle. Adjust the trip collars on the base of the sprinkler head to set the desired arc. For continuous 360-degree rotation, lift the trip lever.
- Tripodearen altuera: The tripod base can be adjusted from 25 inches to 48 inches in height to accommodate different watering needs and plant heights. Loosen the leg clamps, adjust the height, and re-tighten securely.
Mantentzea
- Garbiketa: Periodically check the sprinkler nozzle for debris or mineral buildup. Clean with a small brush or needle if necessary to maintain optimal spray performance.
- Neguan egitea: Before freezing temperatures, disconnect the sprinkler from the hose and drain all water from the unit. Store the sprinkler in a dry, protected area to prevent damage from freezing.
- Biltegiratzea: When not in use, store the sprinkler in a cool, dry place away from direct sunlight.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ihinztagailua ez da biratzen | Low water pressure, debris in head, trip collars set incorrectly. | Increase water pressure, clean nozzle, adjust trip collars for full circle or desired arc. |
| Spray eredu irregularra | Clogged nozzle, damaged diffuser. | Clean nozzle, inspect diffuser for damage. |
| Konexioetatik ura isurtzen | Loose connections, worn washer. | Tighten hose connections, replace rubber washer if damaged. |
| Limited spray distance | Low water pressure, diffuser screw too tight. | Increase water pressure, loosen diffuser screw. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | 58308D |
| Materiala | Brass (sprinkler head), Metal (tripod) |
| Sarrerako konexioaren tamaina | 0.75 hazbete |
| Altuera erregulagarria | 25" eta 48" artean |
| Gehienezko Emaria | 2.5 litro minutuko |
| Estaldura Diametroa | Gehienez 100 oin |
| Spray eredua | Partial to Full Circle (360°) |
Bermea eta Laguntza
Bermeari buruzko informazioa edo laguntza teknikoa lortzeko, jo Orbit-en webgune ofizialera. webwebgunera edo jarri harremanetan Orbit bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria berme-erreklamazioetarako.





