1. Sarrera
Thank you for choosing the LEPOWER LED Motion Sensor Security Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Segurtasun informazio garrantzitsua
OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu fusible edo etengailu elektrikotik instalatu edo mantendu aurretik.
- Produktu hau instalazio-kode aplikagarriaren arabera instalatu behar du produktuaren eraikuntza eta funtzionamendua eta dakartzan arriskuak ezagutzen dituen pertsona batek.
- Grounding is required for safe operation.
- Ez instalatu gailu hau erraz sukoiak diren gainazaletan.
- Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
- Ez konektatu argi-erregulatzaile batera.
- Funtzionamendu-tenperatura-tartea: -20 °C eta 40 °C artean (-4 °F eta 104 °F artean).
3. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- LEPOWER LED Motion Sensor Security Light (1)
- Muntatzeko hardwarea (torlojuak, kable-azkoinak, muntatzeko plaka)
- Argibide eskuliburua (1)
4. Produktua amaitu daview
The LEPOWER LED Motion Sensor Security Light features two adjustable LED light heads and a motion sensor. It is designed for outdoor use, providing bright illumination and enhanced security.
4.1. irudia: Aurrealdea view of the LEPOWER LED Motion Sensor Security Light, showing the two adjustable light heads and the motion sensor unit below.
Figure 4.2: Detail of an LED light head, illustrating the filter lens and the arrangement of the LED beads for optimal illumination.
5. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | YY01A-BL |
| Energia-kontsumoa | 30W |
| Distira | 3200 lumen |
| Kolore Tenperatura | 5500K (Zuri Hotza) |
| liburukiatage | 120 Volt |
| Detekzio angelua | 180° |
| Sentsazio-eremua | Gehienez 72 oin |
| Lighting Time Adjustment | 10 seconds to 10 minutes (stepless) |
| Materiala | Aluminioa, polikarbonatoa |
| Uraren Erresistentzia | IP65 Iragazgaitza |
| Neurriak (L x W x H) | 10.12" x 4.51" x 7.55" |
| Ziurtagiriak | ETL Listed, FCC Listed |
Figure 5.1: Dimensional drawing of the security light, indicating length, width, and height measurements.
6. Instalatzeko jarraibideak
6.1 Hasi aurretik
- Itzali etengailuaren edo fusibleen kutxan.
- Ensure the mounting surface is structurally sound and can support the fixture's weight.
- Wear appropriate safety gear (e.g., safety glasses, gloves).
6.2 Gailua muntatzea
- Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush against the surface.
- Pull the electrical wires from the junction box through the center hole of the mounting plate.
Figure 6.1: Illustration of the wiring process, connecting the fixture's wires to the household electrical supply within a junction box.
6.3 Kableatutako konexioak
- Konektatu berdea ground wire from the fixture to the household ground wire (usually bare copper or green) using a wire nut.
- Konektatu zuria neutral wire from the fixture to the household neutral wire (usually white) using a wire nut.
- Konektatu beltza hot wire from the fixture to the household hot wire (usually black) using a wire nut.
- Kontu handiz sartu hari guztiak lotura-kutxan.
6.4 Elementua finkatzea
- Lerrokatu euskarria muntaketa-plakarekin eta finkatu emandako torlojuekin.
- Ensure the fixture is tightly sealed against the mounting surface to prevent water intrusion.
6.5 Adjusting Light Heads and Sensor
The two LED light heads and the motion sensor can be adjusted independently to cover the desired area.
- Loosen the adjustment screws on the light heads and sensor.
- Position them to the desired angle.
- Tighten the screws to secure their position.
Figure 6.2: The light heads and motion sensor can be rotated and tilted to direct illumination and detection precisely where needed.
7. Funtzionamendua eta ezarpenak
After installation, restore power to the fixture. The motion sensor has adjustable controls for sensitivity and lighting duration.
7.1 Sentsoreen kontrolak
The control dials are located on the underside of the motion sensor unit.
7.1. irudia: Xehetasuna view of the control dials on the motion sensor, allowing adjustment of lighting duration and detection range.
- DENBORA botoia: Adjusts how long the light stays on after motion is detected. Settings range from 10 seconds to 10 minutes. Rotate clockwise for longer duration, counter-clockwise for shorter.
- SENS (Sensitivity) Knob: Adjusts the detection range of the motion sensor, from approximately 0 to 72 feet. Rotate clockwise for greater sensitivity/range, counter-clockwise for less.
- TEST Mode: A specific setting on the TIME knob (often marked 'Test') allows for quick testing of the sensor's detection area. In test mode, the light will turn on for a few seconds each time motion is detected, regardless of ambient light.
Figure 7.2: Visual representation of the motion sensor's 72-foot detection range and the stepless adjustable switch for customization.
7.3. irudia: Gainazala view demonstrating the 180-degree detection angle and the maximum 72-foot sensing distance of the motion sensor.
8. Mantentzea
Regular maintenance ensures optimal performance and extends the lifespan of your security light.
- Garbiketa: Clean the fixture periodically with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik, akabera edo osagai elektrikoak kaltetu baitezakete.
- Ikuskapena: Periodically check for loose wiring, damaged insulation, or signs of wear. Address any issues promptly.
- Beroa xahutzea: The aluminum housing is designed for efficient heat dissipation. Ensure no obstructions block the heat sinks on the back of the light heads.
Figure 8.1: Close-up of the light head's rear, highlighting the heat dissipation design for prolonged LED lifespan.
9. Arazoak
If your security light is not functioning as expected, refer to the following common issues and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da gauez pizten. | 1. Energia itzalita dago. 2. Sensor is blocked. 3. TIME or SENS settings are too low. 4. Inguruko argia altuegia da. | 1. Egiaztatu etengailua. 2. Clear obstructions from sensor. 3. Adjust TIME and SENS knobs. 4. Relocate fixture or shield sensor from external light sources. |
| Argia etengabe pizten da. | 1. Mugimendu konstantea detekzio-eremuan. 2. Wiring error. 3. Sentsorearen matxura. | 1. Reduce SENS setting or adjust sensor angle. 2. Verify wiring connections. 3. Jarri harremanetan bezeroarentzako laguntza-zerbitzuarekin arazoak jarraitzen badu. |
| Argia piztu eta itzali egiten da. | 1. Intermittent power. 2. Sensor detecting small, distant movements. 3. liburukiataggorabeherak. | 1. Egiaztatu elikadura-hornidura. 2. Reduce SENS setting. 3. Consult an electrician if voltage arazoak susmatzen dira. |
| Detection range is too short or too long. | SENS knob is incorrectly set. | Adjust the SENS knob to the desired range. |
10. Bermearen informazioa
This LEPOWER product is covered by a 12 hilabeteko bermea erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera normalaren pean. Ez ditu estaltzen instalazio desegokiaren, istripuaren, erabilera okerraren, gehiegikeriaren edo baimenik gabeko aldaketen ondoriozko kalteak.
Mesedez, gorde zure erosketa-froga berme-erreklamazioetarako.
11. Bezeroarentzako arreta
If you have any questions, require technical assistance, or need to make a warranty claim, please contact LEPOWER customer support. Refer to the product packaging or the official LEPOWER webgunea kontaktu-informazio eguneratuena lortzeko.
Lineako laguntza lortzeko, bisitatu: LEPOWER Store on Amazon