Sartorius BCE2201-1S Entris II Essential Precision Balance User Manual

1. Sarrera

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your Sartorius BCE2201-1S Entris II Essential Precision Balance. To ensure accurate and reliable performance, please read this manual thoroughly before using the device and keep it for future reference.

2. Segurtasun informazioa

Jarraitu segurtasun neurri hauek lesioak eta balantza kaltetzea saihesteko:

• Operate the balance only in dry, indoor environments.
• Ensure the power supply matches the specifications indicated on the balance.
• Do not open the balance housing; refer servicing to qualified personnel.
• Saihestu balantza muturreko tenperaturen, hezetasunaren edo eguzki-argiaren eraginpean jartzea.
• Do not place objects heavier than the maximum capacity (2200g) on the weighing pan.
• Clean the balance with a soft, damp oihal eta detergente leun bat. Saihestu garbitzaile edo disolbatzaile urratzaileak.

3. Paketearen edukia

Upon unpacking, verify that all components are present and undamaged. The package should contain:

• Sartorius BCE2201-1S Entris II Essential Precision Balance
• Elikatze-moldagailua
• Pisatzeko zartagina
• Draft Shield (if applicable to model configuration)
• Erabiltzailearen eskuliburua (dokumentu hau)

Elementuren bat falta bada edo hondatuta badago, jarri harremanetan berehala zure hornitzailearekin.

4. Konfigurazioa

4.1 Desontziratzea eta kokatzea

Carefully remove the balance from its packaging. Place the balance on a stable, level surface free from vibrations, drafts, and rapid temperature changes. Ensure adequate space around the balance for operation and maintenance.

4.2 Muntaketa

Place the weighing pan onto the pan support. If your model includes a draft shield, assemble it according to the diagrams provided in the separate assembly guide or on the packaging.

1. irudia: The Sartorius BCE2201-1S Entris II Essential Precision Balance, shown with its protective draft shield and weighing pan installed. This image illustrates the typical setup of the balance ready for use.

4.3 Energia-konexioa

Connect the power adapter to the balance and then plug it into a suitable electrical outlet. Allow the balance to warm up for at least 30 minutes before initial use to ensure optimal stability.

4.4 Initial Calibration (isoCAL)

The Entris II features an internal automatic calibration function (isoCAL). Upon initial power-up or after relocation, it is recommended to perform an isoCAL. Refer to the operating instructions section for details on initiating this process via the touch display.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzaltzea

• Pizteko: Sakatu botoia Piztu/Desaktibatu button (typically marked with a circle and vertical line symbol).
• Itzaltzeko: Sakatu eta eutsi botoiari Piztu/Desaktibatu botoia pantaila itzali arte.

5.2 Basic Weighing Procedure

1. Ensure the weighing pan is empty and clean.
2. Sakatu Zero button to set the display to 0.0g.
3. Place the item to be weighed gently onto the center of the weighing pan.
4. Wait for the stability indicator (usually a small circle or arrow) to appear, indicating a stable reading.
5. Read the weight displayed on the LED touch screen.

5.3 Taraketa

Taring allows you to subtract the weight of a container, so only the net weight of the sample bistaratzen da.

1. Jarri ontzi hutsa pisatzeko platera gainean.
2. Sakatu Tara button (often marked with a 'T' or '->0<-' symbol). The display will show 0.0g.
3. Gehitu sample to the container. The display will show the net weight of the sample.

2. irudia: Xehetasun bat view of the Sartorius Entris II Essential Precision Balance's LED touch display, showing the current weight reading, stability indicator, and various function icons including isoCAL and Tare. This image highlights the user interface for daily operation.

5.4 Unitatearen hautaketa

The Entris II balance supports various weighing units. To change the unit, navigate through the menu options on the LED touch display. Consult the on-screen prompts or the full digital manual for specific steps to access unit settings.

5.5 Aplikazio integratuak

The Entris II features 12 built-in applications to assist with various weighing tasks. These applications can be accessed via the touch display menu. Examples include counting, percentage weighing, and density determination. Refer to the balance's on-screen help or the comprehensive digital manual for detailed instructions on using each application.

6. Mantentzea

6.1 Garbiketa

Regular cleaning ensures the longevity and accuracy of your balance.

• Garbitu aurretik, deskonektatu balantza korronte-iturritik.
• Erabili lipurrik gabeko zapi leun bat dampened with a mild detergent solution (e.g., soap and water) to clean the exterior surfaces.
• The weighing pan can be removed and cleaned separately with warm water and detergent. Ensure it is completely dry before re-installing.
• Do not allow liquids to enter the balance housing.

6.2 Kalibrazioa

The isoCAL function provides internal automatic calibration. It is recommended to perform this regularly, especially if the ambient temperature changes significantly or if high accuracy is critical for your application. Access isoCAL via the balance's menu.

7. Arazoak

If you encounter issues with your balance, refer to the following common problems and solutions:

• Irakurketa ezegonkorrak:
  • Check for drafts, vibrations, or temperature fluctuations.
  • Ensure the balance is level and on a stable surface.
  • Perform an isoCAL.
• Display Shows Error Message:
  • Consult the balance's on-screen help or the comprehensive digital manual for specific error code meanings.
  • Try powering the balance off and on again.
• Balance Does Not Power On:
  • Verify the power adapter is securely connected to both the balance and the electrical outlet.
  • Egiaztatu entxufea beste gailu batekin.

If the problem persists after attempting these solutions, contact Sartorius customer support or your authorized dealer.

8. Zehaztapenak

9. Bermea eta Laguntza

For detailed warranty information and technical support, please refer to the official Sartorius website or contact your local authorized Sartorius dealer. Keep your purchase receipt and product serial number readily available when seeking support.