iJDMTOY RamBox Interior LED Light Replacement Manual

Produktua amaituview

The iJDMTOY 4pc 3X Brighter 18-SMD Full White LED RamBox Interior Light Replacement is designed to significantly enhance the illumination within your truck's RamBox storage compartments. These LED lights provide a bright, full white light, offering superior visibility compared to standard incandescent bulbs. This product is compatible with 2019-up Gen5 Dodge RAM 1500 eta 2020-up Gen5 RAM HD 2500 3500 trucks equipped with RamBox storage. Please note, this product is not compatible with RAM Classic ereduak.

Figure 1: iJDMTOY 4pc 18-SMD Full White LED RamBox Interior Light Replacement Kit.

Ezaugarriak eta Abantailak

• Distira hobetua: Delivers triple the brightness compared to dull yellowish incandescent bulbs and most miniature LED replacement bulbs or strips.
• Even Lighting Projection: Ensures uniform illumination throughout the RamBox compartment, eliminating dark spots.
• Ikusgarritasun hobetua: Makes it significantly easier to organize your trunk area and locate tools and items, even in low-light conditions.
• Ordezkapen zuzena: Designed for a seamless fit, replacing OEM part numbers such as Mopar # 68211290AB and 68276972AA.

Figure 2: Brightness comparison between iJDMTOY LED (left) and OEM light (right).

3. irudia: Xehetasuna view of the iJDMTOY LED light's powerful illumination.

Instalazio Gida

Follow these steps to safely and correctly install your new iJDMTOY RamBox LED lights. It is recommended to perform this installation in a well-lit area.

1. Prestaketa: Ensure your vehicle's ignition is off and the RamBox lights are not active. Gather necessary tools, such as a small flat head screwdriver or a plastic pry tool.
2. Remove OEM Lamp: Carefully pry out the OEM lamp cover and housing from the RamBox compartment. Use a flat head screwdriver or a pry tool, applying gentle pressure to release the clips.
3. Disconnect Power Cord: Once the OEM housing is loose, unplug the existing power cord from the back of the lamp.
4. Connect New LED Assembly: Take the new iJDMTOY LED assembly. VERY CAREFUL! The pins inside the LED lamp are very thin. Ensure the pins are perfectly aligned with the adapter's openings before fully plugging in the adapter. If the pins are not aligned properly, use a small flat head screwdriver to gently adjust them. Improper alignment can bend or damage the contacts.
5. Proba funtzionaltasuna: Before fully securing the new LED assembly, briefly turn on your vehicle's lights or open the RamBox to confirm the new LED lights illuminate correctly.
6. Secure New LED Assembly: Carefully push the new LED assembly into the RamBox opening until it clicks securely into place. Ensure it sits flush with the surrounding surface.
7. Repeat for all lights: Repeat the process for all four RamBox interior lights.

Figure 4: Caution regarding delicate pins during connection.

Video 1: Official iJDMTOY product demonstration and installation overview for the RamBox LED lights. This video shows the product in detail and its application.

Figure 5: RamBox interior with iJDMTOY LED lights installed, providing clear illumination.

Figure 6: RamBox interior with iJDMTOY LED lights from a different angle.

Figure 7: Bright illumination inside the RamBox from the installed LED lights.

Funtzionamendu-argibideak

The iJDMTOY RamBox LED lights operate automatically with your vehicle's existing RamBox lighting system. They will turn on when the RamBox is opened or when the vehicle's interior lights are activated, depending on your truck's specific wiring and settings. No additional controls or manual operation are required for these replacement lights.

Mantentzea

These LED lights are designed for long-term, maintenance-free operation. However, to ensure optimal performance and longevity:

• Garbiketa: Periodically wipe the surface of the LED lenses with a soft, damp cloth to remove any dust or debris that may accumulate. Avoid using abrasive cleaners or solvents.
• Ikuskapena: Occasionally inspect the lights for any signs of damage or loose connections. If any issues are observed, refer to the Troubleshooting section.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For information regarding product warranty, returns, or technical support, please contact iJDMTOY directly through their official webproduktua erosi zenuen webgunean edo saltzailean. Gorde erosketaren frogagiria berme-erreklamazioetarako.

You can visit the official iJDMTOY store for more products and support: iJDMTOY Store on Amazon.