Sarrera
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Segurtasun Informazioa
- OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu fusible edo etengailu elektrikotik instalazioa edo mantentze-lanak egin aurretik.
- Produktu hau instalazio-kode aplikagarriaren arabera instalatu behar du produktuaren eraikuntza eta funtzionamendua eta dakartzan arriskuak ezagutzen dituen pertsona batek.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Ez konektatu argi-erregulatzaile batera.
- Ez begiratu zuzenean LED argi iturrira.
- Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
- Funtzionamendu-tenperatura-tartea: -20 °C eta 40 °C artean (-4 °F eta 104 °F artean).
Paketearen edukia
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Muntatzeko hardwarea (torlojuak, kable-azkoinak)
- Argibide eskuliburua
Produktuaren Ezaugarriak
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Distira handia: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Mugimendu-detekzioa: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Diseinu doigarria: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Eraikuntza iraunkorra: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Eguraldi erresistentea: Waterproof rating ensures resilience against rain, sleet, or snow.
- ETL Ziurtagiria: Meets safety and quality standards.
Irudia: Aurrealdea view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Konfigurazioa
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Instalaziorako prestatu:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Ziurtatu muntatzeko gainazala egonkorra dela eta elementuaren pisua eutsi dezakeela.
- Muntatu aparatua:
- Lotu muntatzeko euskarria juntura-kutxan emandako torlojuak erabiliz.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Argi-buruak eta sentsorea doitzea:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Berrezarri boterea: Piztu berriro etengailuan.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Funtzionamendu-argibideak
The motion sensor has adjustable settings to customize its operation.
- TIME ezarpena: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: Markatu egiten du mugimendu-sentsorea aktibatzen den inguruko argi-maila.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Hasierako piztea: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Mantentzea
- Garbiketa: Garbitu tresna leun batekin, damp zapirik. Ez erabili garbitzaile edo disolbatzaile urratzailerik. Ziurtatu argindarra itzalita dagoela garbitu aurretik.
- Ikuskapena: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LED: LED bonbilla integratuak iraupen luzerako diseinatuta daude eta ezin ditu erabiltzaileak ordezkatu.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Argia etengabe pizten da. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Argia distira edo iluntzen da. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| Motion sensor range is poor. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Zehaztapenak
| Modelo zenbakia | SM-4000-180-2H |
| Marka | Amazon Oinarrizkoak |
| Wattage | 40W |
| Distira | 4000 lumen |
| Kolore Tenperatura | 5000K Eguneko argia |
| Detekzio angelua | Gehienez 180° |
| Detekzio-eremua | Gehienez 49 oin |
| liburukiatage | 120 Volt |
| Materiala | Aluminioa, Plastikoa |
| Uraren Erresistentzia Maila | Iragazgaitza |
| Ziurtagiriak | ETL Ziurtagiria |
| Elementuaren neurriak (L x W x H) | 14.96" x 6.3" x 5.12" |
| Elementuaren pisua | 1.9 kilo |
Bermea eta Laguntza
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.