Geevon Weather Station User Manual

Sarrera

This user manual provides detailed instructions for the setup, operation, and maintenance of your Geevon Wireless Indoor Outdoor Thermometer Weather Station. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.

The Geevon Weather Station features a 7.6-inch color LCD display, providing easy-to-read data including indoor/outdoor temperature and humidity, weather forecast, moon phase, alarm clock, barometric pressure, calendar, and time. It supports up to 3 remote sensors for monitoring multiple locations.

Paketearen edukia

• 1 x Geevon Weather Station Main Unit
• 1 x Haririk gabeko Kanpoko Sentsore
• 1 x CA-ko egokitzailea
• 1 x Erabiltzailearen eskuliburua

Produktua amaituview

Unitate Nagusiaren pantaila

This image shows the main unit's color LCD display with various indicators labeled, including Indoor Temperature, Indoor Humidity, Weather Forecast, Barometric Pressure, Date and Time, Outdoor Temperature, Outdoor Humidity, Comfort Indicator, and Alarm Clock.

• Barruko tenperatura/hezetasuna: Displays current indoor conditions.
• Kanpoko tenperatura/hezetasuna: Displays current outdoor conditions from the remote sensor.
• Eguraldi Iragarpena: Icons indicating predicted weather for the next 12-24 hours.
• Presio barometrikoa: Current atmospheric pressure reading.
• Ilargiaren fasea: Uneko ilargi faseen bistaratzea.
• Ordua eta data: Current time and calendar information.
• Erosotasun adierazlea: Shows comfort level based on indoor humidity.

Main Unit Back and Side Controls

This image displays the rear and side of the main unit, highlighting the control buttons (MODE, UP, DOWN, CH, ALERT, ALARM) and the DC 5V power input port.

• JARRAIBIDEAK: Cycles through display modes and enters setting mode.
• GORA BEHERA: Adjusts values in setting mode, changes units.
• CH: Selects outdoor sensor channel (1, 2, or 3).
• ALERTA: Sets temperature alerts.
• ALARMA: Sets and activates the alarm clock.
• 5 V DC: Power input port for AC adapter.

Haririk gabeko kanpoko sentsorea

This image shows both the main weather station unit and its accompanying wireless outdoor sensor. The sensor is a compact black rectangular device with a red indicator light and a small antenna icon, indicating its wireless capability.

• Tenperatura/Hezetasun sentsorea: Measures outdoor conditions.
• Transmisioaren adierazlea: Red LED flashes when data is transmitted.
• Kanal-aldaketa: Inside battery compartment, sets sensor channel (1, 2, or 3).

Konfigurazio Gida

1. Kanpoko sentsorea piztea

1. Open the battery compartment on the back of the wireless outdoor sensor.
2. Insert 2 x AAA batteries (not included), observing polarity (+/-).
3. Select a channel (1, 2, or 3) using the small switch inside the battery compartment. This is important if you plan to use multiple sensors.
4. Close the battery compartment. The sensor's indicator light will flash, indicating it is transmitting.

2. Powering the Main Unit

1. Connect the included AC power adapter to the DC 5V port on the back of the main unit.
2. Konektatu egokitzailea hormako entxufe estandar batera. Pantaila piztuko da.
3. Aukerakoa: For backup power, insert 3 x AAA batteries (not included) into the battery compartment on the back of the main unit. Note that the backlight will only stay on continuously when powered by the AC adapter.

3. Pairing the Sensor with the Main Unit

The main unit will automatically search for the outdoor sensor. Ensure both units are within range (up to 200ft/60m without obstructions). The outdoor temperature and humidity will appear on the main unit's display once paired.

If pairing fails (display shows '- -'), press and hold the "CH" button on the main unit for 3 seconds to manually initiate a search for the sensor. Ensure the sensor's channel matches the selected channel on the main unit.

This image illustrates the wireless transmission range of the Geevon Weather Station, showing the main unit indoors and the outdoor sensor placed near a window, indicating its ability to transmit data over a distance.

4. Hasierako ordua eta data ezartzea

This weather station does not have a radio-controlled clock. You will need to set the time and date manually upon first use or after a power reset.

1. Press and hold the "MODE" button for 3 seconds to enter time setting mode.
2. Use the "UP" or "DOWN" buttons to adjust the flashing value.
3. Press "MODE" to confirm and move to the next setting (e.g., 12/24 hour format, hour, minute, year, month, day).
4. Press "MODE" repeatedly until all settings are confirmed and you exit the setting mode.

Funtzionamendu-argibideak

Bistaratze-distira doitzea

When powered by the AC adapter, press the "Snooze/Light" bar on top of the unit to adjust the backlight brightness (High, Medium, Low, Off). If running on batteries, the backlight will turn off after 10 seconds to conserve power.

Eguraldi Iragarpena

This image displays the various weather forecast icons used by the Geevon Weather Station, including Sunny, Partly Cloudy, Cloudy, and Rainy, indicating the predicted weather conditions.

The weather station predicts weather conditions for the next 12-24 hours based on barometric pressure changes. The forecast icons include Sunny, Partly Cloudy, Cloudy, and Rainy. Note that the forecast is an estimation and may not always reflect current conditions.

Alarma-erlojua eta Snooze funtzioa

This image shows the Geevon Weather Station on a bedside table next to a sleeping person, highlighting its alarm clock and snooze capabilities for managing wake-up times.

1. Alarma ezartzea: Press and hold the "ALARM" button to enter alarm setting mode. Use "UP" or "DOWN" to adjust hour and minute, press "ALARM" to confirm.
2. Alarma aktibatzea/desaktibatzea: Press "ALARM" briefly to turn the alarm on or off. An alarm icon will appear/disappear on the display.
3. Atzeratu: When the alarm sounds, press the "Snooze/Light" bar to activate the 5-minute snooze function.

Tenperatura alertak

You can set customizable high/low temperature alerts for indoor and outdoor readings.

1. Press and hold the "ALERT" button to enter alert setting mode.
2. Use "UP" or "DOWN" to adjust the high/low temperature thresholds.
3. Press "ALERT" to confirm and move to the next alert setting.
4. An alert icon will appear when an alert is active. An audible alarm will sound if the temperature goes outside the set range.

This image shows the weather station displaying an "Ice Alert" icon, indicating that the outdoor temperature has dropped to a level where ice formation is possible, providing a visual warning.

MAX/MIN Records

The unit records the maximum and minimum temperature and humidity values for both indoor and outdoor readings since the last reset.

• Press the "MAX/MIN" button briefly to view gehienezko balioak.
• Press "MAX/MIN" again to view gutxieneko balioak.
• Press and hold "MAX/MIN" to clear the recorded values.

Mantentzea

• Garbiketa: Wipe the display and unit surfaces with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Bateria ordezkatzea: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Ensure correct polarity.
• Sentsoreen kokapena: For accurate readings and optimal transmission, place the outdoor sensor in a shaded, dry location, away from direct sunlight, heat sources, and electronic interference. Ideally, place it 1.2 to 2.4 meters above the ground.

This diagram illustrates optimal placement for the outdoor sensor: away from heat sources, placed vertically, 1.2-2.4 meters above ground with permanent shade, and 1.5-2 meters away from electronic devices to ensure accurate data and reliable transmission.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

Geevon offers a 30-day free money-back guarantee, a 12-month warranty, and lifetime consulting service for this product.

For any issues or inquiries, please contact Geevon customer support. Refer to your purchase documentation for specific contact details or visit the official Geevon webgunea.

Oharra: As per customer feedback, if the base station has not received transmission from the outdoor sensor ('- -' on the LCD), pressing and holding the 'CH' button for 3 seconds can manually initiate transmission. Some users have found success by powering the outdoor sensor first, then the main unit, especially after a full power cycle (removing all batteries and AC power from both units before re-inserting in this order).