BISSELL ProHeat 2X Revolution 1858N Carpet and Upholstery Cleaner User Manual

1. Sarrera

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your BISSELL ProHeat 2X Revolution 1858N carpet and upholstery cleaner. Please read all instructions before using the appliance to ensure proper function and to prevent injury or damage.

The BISSELL ProHeat 2X Revolution is a versatile 2-in-1 deep cleaning system designed for both full-room carpet cleaning and targeted spot and upholstery cleaning. It features HeatWave Technology to maintain consistent water temperature and a dual tank system to keep clean and dirty water separate.

2. Segurtasun-argibide garrantzitsuak

Etxetresna elektrikoa erabiltzean, oinarrizko neurriak hartu behar dira kontuan, besteak beste:

• Konektatu beti lurrean dagoen hartune batera.
• Deskonektatu entxufetik erabiltzen ez duzunean eta gailua garbitu, mantendu edo konpontzen hasi aurretik.
• Ez sartu uretan edo likidoetan.
• Ez erabili hondatutako kablearekin edo entxufearekin.
• Ez tiratu edo eraman kabletik, ez erabili kablea helduleku gisa, ez itxi ate bat kabletik, edo ez tiratu kablea ertz edo ertz zorrotzetatik.
• Mantendu ilea, arropa solteak, atzamarrak eta gorputz-atal guztiak irekiguneetatik eta atal mugikorretatik urrun.
• Makina honetarako BISSELL garbiketa-formulak soilik erabili.
• Ez hartu erretzen edo erretzen ari den ezer, hala nola zigarroak, pospoloak edo errauts beroak.
• Ez erabili likido sukoiak edo erregarriak jasotzeko, hala nola gasolina, edo erabili egon daitezkeen tokietan.

3. Paketearen edukia

Egiaztatu osagai guztiak zure paketean daudela:

• BISSELL ProHeat 2X Revolution Main Unit
• Ur Garbiaren Depositua
• Ur zikinaren depositua
• Hose and Attachment Tool (e.g., Tough Stain Tool, Long Reach Tool)
• Erabiltzailearen eskuliburua (dokumentu hau)
• Sample Cleaning Formula

Image 3.1: BISSELL ProHeat 2X Revolution main unit and included spot cleaning tool.

4. Muntaketa eta Konfigurazioa

4.1 Heldulekua

1. Insert the upper handle into the base until it clicks securely into place.
2. Wrap the power cord around the cord wraps for storage.

4.2 Ur garbiaren depositua betetzea

1. Kendu ur garbiaren depositua makinaren atzealdetik.
2. Desblokeatu tapoia deposituaren behealdean.
3. Bete depositua iturriko ur beroarekin (ez irakiten) 'Ur betetze-marrara' iritsi arte.
4. Gehitu BISSELL garbiketa-formularen gomendatutako kantitatea 'Formula Betetzeko Marrara'.
5. Replace the cap and securely reinsert the tank into the machine.

Image 4.1: The BISSELL ProHeat 2X Revolution upright carpet cleaner, ready for use.

5. Funtzionamendu-argibideak

5.1 Eremua prestatzea

• Xurgatu ondo eremua zikinkeria eta hondakin solteak kentzeko.
• Pre-treat any heavily soiled areas or tough stains with a BISSELL pre-treatment solution.

5.2 Deep Cleaning Carpets

1. Entxufatu makina lurreko hartune batera.
2. Sakatu pizteko botoia makina pizteko.
3. Press the recline pedal and make a slow, wet pass forward while holding the spray trigger.
4. Release the spray trigger and make a slow, dry pass backward over the same area to extract dirty water.
5. Repeat passes until the water being extracted appears clean.
6. For best results, make additional dry passes to remove as much moisture as possible.

5.3 Using the Hose and Attachment Tools

The BISSELL ProHeat 2X Revolution includes a hose and various attachment tools for cleaning upholstery, stairs, and hard-to-reach spots.

1. Open the hose access door on the front of the machine.
2. Insert the hose into the opening until it clicks into place.
3. Attach the desired cleaning tool (e.g., Tough Stain Tool, Long Reach Tool) to the end of the hose.
4. Hold the tool approximately one inch above the surface to be cleaned and press the spray trigger to apply solution.
5. Release the trigger and apply downward pressure while pulling the tool slowly over the soiled surface to extract the solution.
6. Errepikatu behar den moduan.

Image 5.1: Proper technique for operating the upright carpet cleaner.

Image 5.2: The Long Reach Tool, ideal for detailed cleaning tasks.

6. Mantentzea

6.1 Emptying and Rinsing the Dirty Water Tank

1. Kendu ur zikinaren depositua makinatik.
2. Ireki deposituaren tapa eta bota ur zikina kanpora.
3. Rinse the tank and lid thoroughly with clean water.
4. Allow to air dry before reassembling.

6.2 Cleaning the Brush Rolls and Nozzle

1. Deskonektatu makina.
2. Remove the nozzle cover by lifting the tabs.
3. Carefully remove any hair or debris from the brush rolls.
4. Rinse the nozzle cover under running water.
5. Reassemble the nozzle cover and brush rolls.

6.3 Makina gordetzea

Store the machine in a dry, protected area. Ensure all tanks are empty and clean before storage.

7. Arazoak

8. Zehaztapenak

• Marka: Bezissell
• Modelo zenbakia: 1858N
• Capacity (Clean Water Tank): Gutxi gorabehera 3.7 litro
• Teknologia: HeatWave Technology, Dual Tank System, DirtLifter PowerBrushes

9. Bermea eta Laguntza

For warranty information, technical support, or to purchase replacement parts and cleaning formulas, please refer to the official BISSELL website or contact BISSELL customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Webgunea: www.bissell.com