Waterdrop WD-WFD-22L

Waterdrop 40-Cup Large Water Filter Dispenser User Manual

Model: WD-WFD-22L

1. Produktua amaitu daview

The Waterdrop 40-Cup Large Water Filter Dispenser is designed to provide filtered water for home and office use. It features a large capacity and a multi-stage filtration system to reduce various contaminants, improving water quality and taste.

Waterdrop 40-Cup Large Water Filter Dispenser

Image 1.1: The Waterdrop 40-Cup Large Water Filter Dispenser, showcasing its clear body, dark grey reservoir, and white lid with a filter indicator light. A filter cartridge is shown separately in the bottom right corner.

Ezaugarri nagusiak:

  • Edukiera handia: 40-cup total capacity (21 cups in the body).
  • NSF-Certified Filtration: Reduces PFOA/PFOS, metal ions, chlorine, taste, and odor. Certified to NSF42 and 372 standards.
  • Iragazkiaren bizitza luzatua: Each filter lasts for 200 gallons or 2 months.
  • Fluxu-abiadura azkarra: Filters water quickly, approximately 5 minutes for a full reservoir.
  • Elikagai-mailako materialak: Constructed from lead-free and BPA-free materials.
  • Smart Filter Replacement Reminder: Integrated indicator light for timely filter changes.
5-Stage Iragazketa Diagrama

1.2 irudia: 5-ak ilustratzen dituen diagramatage filtration process, showing layers of non-woven fabric, coconut shell activated carbon, ion-exchange resin, and activated carbon fiber, with descriptions of what each layer filters.

Oharra TDSri buruz: This system is designed to reduce specific contaminants while retaining beneficial minerals. Therefore, it ez du lower the Total Dissolved Solids (TDS) value. If a low TDS value is preferred, please consider Waterdrop 0 TDS Dispenser models (e.g., WD-WFD-01L, WD-WFD-01W).

TDS Explanation Diagram

Image 1.3: An infographic explaining that TDS is not a professional water quality measure and that this system does not remove essential minerals, thus not lowering TDS. It also shows typical TDS levels for milk, juice, cola, and mineral water.

2. Konfiguratzeko argibideak

2.1 Desontziratzea eta hasierako garbiketa

  1. Kontu handiz kendu osagai guztiak ontzitik.
  2. Wash the dispenser body, lid, and reservoir with mild detergent and rinse thoroughly with cold water. Ez erabili ontzi garbigailurik.

2.2 Iragazkien prestaketa

  1. Kendu iragazki berria ontzitik.
  2. Submerge the filter completely in cold water for 10 minutu. This helps to remove air bubbles and prepare the filter for optimal performance. It is normal to observe some carbon dust during this process.

2.3 Iragazkien instalazioa

  1. Insert the prepared filter firmly into the designated opening in the bottom of the reservoir. Ensure it is seated securely to prevent unfiltered water from bypassing the filter.
  2. Place the reservoir into the dispenser body.

2.4 Initial Flushing

  1. Bete urtegia iturriko ur hotzarekin.
  2. Allow the water to filter through and dispense the first three pitchers of filtered water. This water may contain residual carbon dust and should be discarded or used for watering plants.

2.5 Activating the Smart Filter Replacement Reminder

  1. After installing a new filter, press and hold the button on the lid for 5 seconds until the blue light flashes. This activates the filter life indicator.
Smart Filter Replacement Reminder Indicator

Image 2.1: Close-up of the dispenser lid showing the smart filter replacement reminder light. It illustrates the blue light for 'Good', red flashing for 'Replace soon', and solid red for 'Replace now'.

3. Funtzionamendu-argibideak

3.1 Filling the Dispenser

  1. Slide open the cover on the lid.
  2. Pour cold tap water into the reservoir. The water will filter through to the main body of the dispenser.
  3. Close the sliding cover to help isolate odors and maintain water freshness.

3.2 Ura banatzea

  1. Position a glass or container under the spigot.
  2. Push the spigot lever to dispense filtered water. Release the lever to stop the flow.

3.3 Understanding the Filter Reminder

  • Blue Light (stays on for 5 seconds): Filter is in good condition (Remaining life > 10 days).
  • Red Light (flashes 6 times): Filter needs replacement soon (Remaining life ≤ 10 days).
  • Red Light (stays on for 5 seconds): Filter needs immediate replacement (Remaining life ≤ 0 days).
Smart Filter Replacement Reminder Table

Image 3.1: A table detailing the status of the smart filter replacement reminder, including the indication light behavior and corresponding remaining filter life.

4. Mantentzea

4.1 Iragazkia ordezkatzea

The filter should be replaced every 200 gallons or 2 months, whichever comes first, to ensure optimal filtration performance.

  1. Remove the lid and the reservoir from the dispenser body.
  2. Carefully remove the old filter from the reservoir.
  3. Prepare a new filter by soaking it in cold water for 10 minutes as described in Section 2.2.
  4. Install the new filter into the reservoir and reassemble the dispenser.
  5. Perform initial flushing (Section 2.4) and reset the filter reminder (Section 2.5).

4.2 Banagailua garbitzea

Regular cleaning of the dispenser body, lid, and reservoir is recommended to maintain hygiene.

  • Wash all parts (except the filter) with mild detergent and rinse thoroughly with cold water.
  • Do not use abrasive cleaners or put any parts in a dishwasher.
  • Ziurtatu pieza guztiak guztiz lehortuta daudela berriro muntatu aurretik.

5. Arazoak

ArazoaKausa posibleaIrtenbidea
Iragazketa-tasa motela.Iragazkia buxatuta dago edo bere bizitza amaitzear dago.Replace the filter. Ensure the new filter is properly soaked before installation.
Unpleasant taste or odor in filtered waterFilter is expired or not properly installed.Replace the filter. Ensure the filter is securely seated in the reservoir. Perform initial flushing.
Water leaking from dispenserSpigot not properly tightened or damaged. Dispenser components not assembled correctly.Check and tighten the spigot. Reassemble all components, ensuring they are fitted correctly. Inspect for cracks or damage.
Filter reminder light not workingButton not pressed long enough, or battery issue.Press and hold the button for 5 seconds until the blue light flashes. If the issue persists, contact customer service.

If you encounter any issues not listed here or if the suggested solutions do not resolve the problem, please contact Waterdrop Customer Service for assistance.

6. Zehaztapenak

  • Marka: Ur-tanta
  • Modelo zenbakia: WD-WFD-22L
  • Produktuaren neurriak (L x W x H): 8.5" x 12.4" x 8.7"
  • Elementuaren pisua: 4 kilo
  • Edukiera: 40-cup (21 cups in body)
  • Iragazkiaren iraupena: 200 gallons or 2 months
  • Ezaugarri berezia: Kloro murrizketa, NSF ziurtagiria
  • Instalazio mota: exentu
  • Energia iturria: Mechanical (for dispensing)
  • UPC: 840814177563, 840814169513, 840814195352
  • Beharrezko bateriak: No (for filter reminder, it's typically a small, non-replaceable button cell battery)
Waterdrop Dispenser Dimensions

Image 6.1: The Waterdrop dispenser with key dimensions labeled: 8.7 inches height, 8.5 inches length, and 12.1 inches width, indicating its compact design for refrigerator placement.

7. Bermearen informazioa

Waterdrop products typically come with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or visit the official Waterdrop webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

8. Bezeroarentzako arreta

For any questions regarding installation, filters, or general product inquiries, please contact Waterdrop Customer Service.

Waterdrop Customer Service Contact Information

Image 8.1: An image depicting a customer service representative with a headset, indicating 24/7/365 service availability and encouraging users to contact for any questions.

You can find contact details on the official Waterdrop webgunearen bidez edo produktua erosi duzun dendariaren bidez.

© 2025 Waterdrop. Eskubide guztiak erreserbatuta.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.