Diablo X-Player 2.0 Gaming Chair User Manual

Sarrera

Welcome to the Diablo X-Player 2.0 Gaming Chair user manual. This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your new gaming chair. Designed for exceptional comfort and ergonomic support during long gaming sessions or extended computer work, the X-Player 2.0 features a robust metal frame, adjustable 3D armrests, and memory foam cushions for optimal spinal support. Please read this manual carefully before assembly and use to ensure proper function and longevity of your chair.

Segurtasun Informazioa

• Ziurtatu osagai guztiak ondo lotuta daudela erabili aurretik.
• Ez jarri aulkian.
• Ez erabili aulkia piezaren bat hondatuta edo falta bada.
• Mantendu pieza txikiak haurrengandik urrun itotzeko arriskuak saihesteko.
• Gehienezko pisu-ahalmena: 150 kg (330 lb). Ez gainditu muga hau.
• Erabili aulkia gainazal lau eta egonkor batean.

Paketearen edukia

Before beginning assembly, verify that all parts listed below are present in your package:

• Bizkarraldea
• Eserlekua
• Beso-euskarriak (2)
• Izar Oinarria
• Gurpilak (5)
• Gas Igogailuaren Zilindroa
• Gas Igogailuaren Estalkia
• Okertu Mekanismoa
• Gerrialdeko kuxina
• Buru-euskarri kuxina
• Muntaketa-tresneria (torlojuak, arandelak, Allen giltza)

Konfigurazioa eta Muntaketa

Follow these steps to assemble your Diablo X-Player 2.0 Gaming Chair. It is recommended to have a second person assist with certain steps.

1. urratsa: Gurpilak izar-oinarrira lotu

Sartu bost gurpilak izar-oinarriaren hanka bakoitzaren muturretan dauden zuloetan. Sakatu ondo klik egin arte.

Figure 1: Illustration of the chair's base with casters and tilt mechanism. The PFC 360 casters are designed for smooth, scratch-free movement.

Step 2: Install Gas Lift and Cover

Place the gas lift cylinder into the center hole of the star base. Then, slide the gas lift cover over the gas lift cylinder.

Step 3: Attach Tilt Mechanism to Seat Base

Align the tilt mechanism with the pre-drilled holes on the underside of the seat base. Ensure the front of the mechanism faces the front of the seat. Secure it with the provided screws and tighten them using the Allen key.

Figure 2: The fully assembled Diablo X-Player 2.0 Gaming Chair, showcasing its ergonomic design and black fabric finish.

Step 4: Connect Seat Base to Gas Lift

Carefully place the assembled seat base (with tilt mechanism attached) onto the gas lift cylinder. The tapered end of the gas lift will fit into the mechanism's opening.

Step 5: Attach Armrests to Seat Base

Attach the armrests to the sides of the seat base using the designated screws. Ensure they are oriented correctly (left and right). Do not fully tighten the screws until the backrest is attached, allowing for slight adjustment.

3. irudia: Xehetasuna view of the Armtech Hybrid 3D armrests, illustrating their adjustable features for height, rotation, and forward/backward movement.

Step 6: Attach Backrest to Seat Base and Armrests

Align the backrest with the mounting brackets on the seat base and armrests. Secure it with the remaining screws. Once all screws are in place, fully tighten all screws for the armrests and backrest.

4. Irudia: Atzealdea view of the gaming chair, highlighting the robust backrest structure and design.

Step 7: Attach Lumbar and Headrest Cushions

Attach the lumbar cushion to the backrest using its straps, positioning it to support your lower back. Attach the headrest cushion to the top of the backrest, adjusting its height for neck support.

Figure 5: Close-up of the X-Pillow headrest and lumbar cushion, demonstrating their memory foam construction for adaptive support.

Funtzionamendu-argibideak

Altuera doitzea

To adjust the chair's height, pull the lever located on the right side of the seat upwards. While pulling the lever, apply weight to lower the chair or lift your weight to raise it. Release the lever to lock the height.

Backrest Recline (Tilttech™ Gear)

To recline the backrest, pull the lever on the left side of the seat upwards. Lean back to your desired angle (up to 160 degrees). Release the lever to lock the backrest in position. The chair supports various angles for gaming (120°), work (90°), movie watching (140°), and napping (160°).

Figure 6: Visual representation of the Tilttech Gear mechanism, illustrating the range of recline angles from 90 degrees for work to 160 degrees for napping.

Tilt/Rocking Function (Tilttech™ Swing)

To enable the rocking function, pull the lever on the right side of the seat (the same lever as height adjustment) outwards. Push it inwards to lock the chair in an upright position. The tension of the rocking motion can be adjusted by turning the knob located underneath the seat.

Figure 7: Illustration of the Tilttech Swing mechanism, which allows the chair to rock. The diagram shows the on/off switch for this function.

Armrest Adjustment (Armtech™ Hybrid 3D)

The 3D armrests can be adjusted in three dimensions:

• Altuera: Press the button on the side of the armrest and slide it up or down.
• Errotazioa: Twist the top of the armrest pad left or right.
• Aurrera/Atzera: Slide the armrest pad forward or backward.

Lumbar and Headrest Cushion Adjustment

The lumbar and headrest cushions are adjustable. Slide them up or down along the backrest straps to find the most comfortable and supportive position for your spine and neck.

Figure 8: Ergonomic design of the chair, highlighting key support areas for the back, neck, and arms to promote a healthy posture.

Mantentzea

Proper care and maintenance will extend the life of your Diablo X-Player 2.0 Gaming Chair.

• Cleaning Fabric/Synthetic Leather: Garbiketa orokorra egiteko, garbitu gainazalak zapi leun eta lehor batekinamp cloth. For stains, use a mild soap solution and a soft brush, then wipe clean with a damp zapi batekin garbitu eta ondo lehortu. Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Caster Cleaning: Periodically remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• estutze torlojuak: Check all screws and bolts periodically and tighten them if necessary to maintain stability.
• Eguzkiaren argia saihestu: Eguzki-argiaren eraginpean denbora luzez egoteak materialaren kolorea galtzea eta degradazioa eragin dezake.

Arazoak konpontzea

Zehaztapenak

• Marka: Diablo
• Modelo zenbakia: X-Player 2.0
• Kolorea: Beltza
• Materiala: Synthetic Leather, Fabric (Nettle fiber and Diablo honeycomb mesh)
• Produktuaren neurriak (L x W x H): 68 x 73 x 146 cm (gutxi gorabehera)
• Elementuaren pisua: 25 kilogramo
• Gehienezko karga-gaitasuna: 150 kg (330 lb)
• Ezaugarri bereziak: Adjustable Headrest & Lumbar Cushions (Memory Foam), Ergonomic Design, Height Adjustable, 3D Armrests, Recline Function (up to 160°), Tilt/Rocking Function
• Markoaren materiala: Metala
• Gurpilak: PU coated, scratch-resistant
• Gas Igogailua: Segurtasun Klasea 4

Bermea eta Laguntza

For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Diablo website. If you encounter any issues not covered in this manual, please contact Diablo customer service for assistance.

Harremanetarako informazioa: Please refer to your purchase documentation or the manufacturer's official webwebgunea, harremanetarako datu eguneratuenak lortzeko.