Flysky Telemetry Data Modules Instruction Manual

1. Sarrera

This manual provides essential information for the installation, operation, and maintenance of your Flysky Telemetry Data Modules. These modules are designed to enhance your remote control experience by providing real-time data such as voltage, temperature, height, and RPM directly to compatible Flysky transmitters. Please read this manual thoroughly before using the modules to ensure proper function and safety.

2. Produktua amaitu daview

The Flysky Telemetry Data Modules are a series of sensors and receivers designed to integrate with Flysky RC systems, providing valuable real-time feedback. Each module serves a specific purpose:

• FS-CPD01 RPM Telemetry Module (Magnetic): Monitors rotational speed up to 60,000 RPM/min. Power: 4.0-6.5V DC. Weight: 6.6g. Size: 31x15x8.5mm.
• FS-CPD02 RPM Telemetry Module (Photo Induction/Optical): Monitors rotational speed up to 60,000 RPM/min. Power: 4.0-6.5V DC. Weight: 6.8g. Size: 31x15x8.5mm.
• FS-CTM01 Temperature Acquisition Module: Monitors temperature range from -40 to 250°C. Power: 4.0-6.5V DC. Weight: 6.8g. Size: 31x15x8.5mm.
• FS-CVT01 Voltage Acquisition Module: Monitoreak voltage range from 0-100V DC. Power: 4.0-6.5V DC. Weight: 6g. Size: 31x15x8.5mm.
• FS-CEV04 i-BUS Serial Bus Receiver: 4 Channels, with i-BUS PORT. Weight: 8.1g. Power: 4.0-6.5V DC. Size: 30x25.6x13mm.
• FS-CAT01 Height Acquisition Module: Provides altitude data.

These modules are compatible with iA4B (directly), iA6B (directly), and iA10 (requires conversion cable) receivers. The FS-CAT01 module is compatible with NV14, PL18, iT4S, and i10 transmitters, but not with FS-i6 or FS-i6X transmitters.

Figure 2.1: Flysky FS-CAT01 Height Acquisition Module. This image shows the compact black module with its connection wires.

Figure 2.2: Flysky FS-CAT01 Module with its standard connection cable. The module is black with a blue label indicating 'FS-CAT01' and 'ALTITUDE'.

3. Konfigurazioa

Proper setup is crucial for accurate telemetry data. Follow these general guidelines for connecting your Flysky Telemetry Data Modules:

1. Bateragarritasun egiaztapena: Ensure your receiver (e.g., iA4B, iA6B, iA10B) and transmitter (e.g., NV14, PL18, iT4S, i10) are compatible with the specific telemetry module you intend to use. Refer to the 'Product Overview' section for module-specific compatibility.
2. Potentzia-konexioa: All modules require a power input of 4.0-6.5V DC. Connect the module to a stable power source within this range.
3. i-BUS Connection: Connect the telemetry module to the i-BUS port on your compatible Flysky receiver. Some receivers like the iA10 may require a conversion cable (not included with the module).
4. Sensor Specific Connections:
   • RPM Modules (FS-CPD01/FS-CPD02): Connect the magnetic or optical sensor to the rotating part you wish to monitor. Ensure the sensor is securely mounted and aligned for accurate readings.
   • Temperature Module (FS-CTM01): Securely attach the temperature probe to the component you want to monitor (e.g., motor, ESC). Ensure good thermal contact.
   • liburukiatage Module (FS-CVT01): Konektatu liburukiatage input wires to the battery or power source you intend to monitor, observing correct polarity.
   • Height Module (FS-CAT01): This module typically connects directly to the i-BUS port and does not require additional external sensors for height measurement.
5. Transmisorearen konfigurazioa: Once connected, power on your receiver and transmitter. Navigate to the telemetry settings on your transmitter to enable and configure the newly connected sensors. Refer to your transmitter's manual for detailed instructions on telemetry setup.

4. Funtzionamendu-argibideak

After successful setup, your telemetry data modules will transmit real-time information to your compatible Flysky transmitter. Here's how to operate and interpret the data:

1. Piztu: Ensure your RC model and transmitter are powered on. The telemetry modules will automatically begin transmitting data once powered.
2. Accessing Telemetry Data: On your Flysky transmitter, navigate to the telemetry or sensor display screen. The exact menu path varies by transmitter model (e.g., FS-i6, i10, iT4S, NV14, PL18). Consult your transmitter's user manual for specific instructions.
3. Jarraipen datuak: The transmitter screen will display the real-time data from your connected modules:
   • RPM: Displays the current rotational speed of the monitored component.
   • Tenperatura: Shows the current temperature in degrees Celsius.
   • liburukiatage: Indicates the real-time voltage of the monitored power source.
   • Altuera: Provides altitude readings.
4. Data Alarms: Many Flysky transmitters allow you to set custom alarms for telemetry data (e.g., low voltage, high temperature). Configure these alarms in your transmitter's settings to receive alerts during operation.

5. Mantentzea

To ensure the longevity and reliable performance of your Flysky Telemetry Data Modules, follow these maintenance guidelines:

• Mantendu lehorra: Protect all modules from moisture and humidity. Water damage can lead to malfunction.
• Garbitasuna: Periodically clean the modules and their sensors with a soft, dry cloth. Avoid using solvents or harsh chemicals. For optical RPM sensors, ensure the lens is clear of dust and debris.
• Ikuskatu konexioak: Regularly check all wiring and connectors for signs of wear, corrosion, or loose connections. Secure any loose connections to prevent intermittent data transmission.
• Ikuskapen fisikoa: Inspect the module casings for any cracks or damage. Ensure sensors (e.g., temperature probe, RPM sensor) are securely mounted and not obstructed.
• Biltegiratzea: When not in use, store the modules in a cool, dry place away from direct sunlight and extreme temperatures.

6. Arazoak

If you encounter issues with your telemetry data modules, consider the following troubleshooting steps:

• No Telemetry Data Displayed:
  • Check all connections: Ensure the module is securely connected to the i-BUS port on the receiver and that the receiver is properly powered.
  • Verify power: Confirm the module is receiving adequate power (4.0-6.5V DC).
  • Transmitter settings: Ensure telemetry is enabled and the correct sensors are selected in your transmitter's menu.
  • Compatibility: Double-check that your transmitter and receiver are compatible with the specific telemetry module.
• Irakurketa okerrak:
  • Sensor placement: Ensure the sensor (e.g., RPM, temperature) is correctly positioned and has good contact with the monitored component.
  • Interference: Keep telemetry modules and wiring away from high-current wires or other sources of electromagnetic interference.
  • Calibration: Some transmitters or modules may require calibration for optimal accuracy. Refer to your transmitter's manual.
• Intermittent Data:
  • Loose connections: Inspect all wiring for loose or damaged connections.
  • Range: Ensure you are operating within the effective range of your RC system.
  • Power fluctuations: Verify that the power supply to the module is stable.

If issues persist after following these steps, contact Flysky customer support or your retailer for further assistance.

7. Zehaztapenak

8. Bermearen informazioa

Flysky products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Flysky website. Warranty coverage typically includes defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims.

9. Laguntza

For technical support, troubleshooting assistance, or inquiries regarding your Flysky Telemetry Data Modules, please contact:

• Flysky Official Support: Visit the official Flysky webMaiz egiten diren galderen, firmwarearen eguneraketen eta harremanetarako informazioaren gunea.
• Zure dendara: Jarri harremanetan produktua erosi duzun dendarekin edo online saltzailearekin.

When contacting support, please have your product model number and purchase information readily available.