BTMETER BT-856A / BT-846A Replacement Wind Sensor Wand Instruction Manual

1. Sarrera

This document provides essential instructions for the proper use and maintenance of your BTMETER Replacement Wind Sensor Wand, designed for compatibility with BTMETER BT-856A and BT-846A Pro HVAC Anemometers. This sensor is a crucial component for accurate wind speed, air flow, and temperature measurements.

Important Note: This separated wind sensor wand does NOT include the main anemometer unit. It must be connected to a compatible BTMETER BT-856A or BT-846A anemometer for functionality.

2. Produktuaren ezaugarriak

• Original Air Flow Sensor: Designed as a direct replacement for BTMETER BT-846A and BT-856A Pro HVAC CFM meters.
• Low Friction Impeller: Features a low-friction impeller for precise measurement of low wind speeds, down to 0.001 units.
• Neurketa-tarte zabala: Capable of measuring wind speeds from 0.001 to 100 mph with an accuracy of +/- 3% +/- 0.2 reading. Air temperature range is 32.0-113.0 °F (0-45 °C) with 0.1 resolution.
• Extendable Separated Design: Allows for measuring wind speed and air flow from higher or more distant areas that may be inaccessible with integrated anemometers.

Figure 1: Illustration of the low friction impeller and USB connection point, highlighting high precision capabilities.

3. Konfigurazioa eta instalazioa

3.1 Connecting the Sensor Wand

1. Locate the USB port on your BTMETER BT-856A or BT-846A anemometer unit.
2. Carefully insert the USB connector of the wind sensor wand into the anemometer's USB port. Ensure a secure connection.
3. The anemometer should automatically detect the connected sensor.

Figure 2: Visual guide for connecting the USB wind sensor to the main anemometer unit. Also shows the tripod mounting hole and the extendable telescopic rod feature.

4. Funtzionamendu-argibideak

4.1 Basic Wind Speed and Temperature Measurement

1. Ensure the wind sensor wand is securely connected to the anemometer.
2. Power on the anemometer unit.
3. The display will show real-time wind speed and temperature readings.
4. Use the 'UNIT' button on the anemometer to cycle through different wind speed units (m/s, km/h, ft/min, knots, mph) and temperature units (°C/°F).

Figure 3: The wind sensor wand in use, demonstrating its high accuracy for wind speed measurement in an outdoor HVAC environment.

4.2 CFM (Cubic Feet per Minute) Measurement (for BT-846A/BT-856A)

To measure CFM, you will typically need to input the cross-sectional area of the duct or vent you are measuring. Refer to your main anemometer's manual for specific steps on entering area values.

1. Press the 'VEL FLOW' button on your anemometer to enter CFM mode.
2. Use the 'UNIT' button to select the appropriate area unit (FT² or M²).
3. Press the 'SAMPLE AREA' button to input the cross-sectional area of the measurement point.
4. Press 'OPTION ENTER' to begin the CFM test.

4.3 App Connection (for BT-856A with Computer Software)

For models with Bluetooth connectivity (e.g., BT-856A with computer software), you can connect the anemometer to a smartphone app for data logging and analysis.

1. Install the companion app (e.g., "Intelligent Anemometer") on your smartphone by scanning the QR code in your main anemometer's manual or searching in your app store.
2. Enable Bluetooth on your smartphone. Ensure other irrelevant Bluetooth devices are disconnected.
3. Open the app and power on your anemometer.
4. Wait for the app to connect to the anemometer. The 'START' button in the app will typically turn blue when connected.
5. Press 'START' in the app to begin recording measurements.
6. Use the 'SAVE' function in the app to export data in TXT/EXCEL format.

5. Mantentzea

• Garbiketa: Gently clean the impeller blades and the sensor body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Biltegiratzea: Store the sensor wand in a clean, dry environment when not in use. Protect it from extreme temperatures and direct sunlight.
• Inpultsatzailearen ikuskapena: Periodically check the impeller for any obstructions or damage. Ensure it spins freely without resistance.

6. Arazoak

• No Reading/Erratic Readings:
  • Ensure the USB connection between the sensor and the anemometer is firm and secure.
  • Check for any physical obstructions or damage to the impeller.
  • Verify that the anemometer unit has sufficient battery power.
• Aplikazioaren konexio-arazoak:
  • Confirm Bluetooth is enabled on your smartphone and the anemometer.
  • Restart both the anemometer and the smartphone app.
  • Ziurtatu aplikazioa azken bertsiora eguneratuta dagoela.

7. Zehaztapenak

Figure 4: Detailed product dimensions and key specifications for the BTMETER Replacement Wind Sensor Wand.

8. Bermea eta laguntza

For warranty information, technical support, or service inquiries, please refer to the documentation included with your main BTMETER anemometer unit or visit the official BTMETER webgunea. Gorde erosketa-agiria berme-erreklamazioetarako.