Sarrera
The CRAFTSMAN 9-inch Magnetic Torpedo Level (Model CMHT43191) is a compact and versatile tool designed for accurate leveling and alignment tasks. Its durable aluminum construction, strong rare earth magnets, and multiple vials make it suitable for a variety of applications in construction, home improvement, and DIY projects.
Ezaugarri nagusiak:
- 9-inch Compact Design: Easily fits into most toolboxes and can be used in confined spaces.
- Rare Earth Magnets: Provides strong adhesion to metal surfaces for hands-free operation.
- Three Vials: Includes horizontal, vertical, and 45-degree vials for comprehensive measurement.
- Magnified Center Vial: Enhances visibility and precision for horizontal leveling.
- Eraikuntza iraunkorra: Made from aluminum for long-lasting performance.
This image shows the CRAFTSMAN 9-inch Magnetic Torpedo Level, highlighting its red body, silver edges, and three clear vials for horizontal, vertical, and 45-degree measurements. The CRAFTSMAN logo is visible on the side.
Konfigurazioa
The CRAFTSMAN Torpedo Level requires minimal setup. It is ready for use directly out of its packaging.
- Desegin: Carefully remove the level from its packaging.
- Ikuskatu: Before first use, inspect the level for any visible damage to the body or vials. Ensure the vials are clear and the bubbles move freely.
- Ezagutu: Identify the three vials: one for horizontal (level), one for vertical (plumb), and one for 45-degree angles.
Funtzionamendu-argibideak
Using the CRAFTSMAN Torpedo Level is straightforward. The key is to ensure the tool is placed firmly and steadily on the surface being measured.
Mailatze horizontala
- Place the bottom edge of the level flat against the surface you wish to check for levelness.
- Observe the bubble in the center (horizontal) vial.
- For a perfectly level surface, the bubble should be centered precisely between the two indicator lines on the vial.
- If the surface is metal, the rare earth magnets on the base will hold the level in place, allowing for hands-free adjustments.
Vertical Leveling (Plumb)
- Hold the side edge of the level against the vertical surface (e.g., a wall or post).
- Observe the bubble in the end (vertical) vial.
- For a perfectly plumb surface, the bubble should be centered precisely between the two indicator lines on the vial.
45-Degree Angle Leveling
- Place the level against the surface you wish to check for a 45-degree angle.
- Observe the bubble in the 45-degree vial.
- For an accurate 45-degree angle, the bubble should be centered precisely between the two indicator lines on the vial.
Mantentzea
Proper care and maintenance will ensure the longevity and accuracy of your CRAFTSMAN Torpedo Level.
- Garbiketa: Wipe the level clean with a soft, damp cloth after each use. Avoid abrasive cleaners or solvents that could damage the vials or the level's finish.
- Biltegiratzea: Store the level in a dry place, away from extreme temperatures and direct sunlight. Protect it from impacts that could affect its accuracy.
- Zehaztasuna egiaztatzea: Periodically check the level's accuracy. For horizontal, place it on a flat surface, note the bubble position, then rotate the level 180 degrees and place it in the same spot. The bubble should be in the same position. If not, the level may be out of calibration or damaged.
Arazoak konpontzea
If you encounter issues with your torpedo level, consider the following:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Irakurketa okerrak | Level is dirty; Vials are damaged; Level is dropped or bent. | Clean the level and vials. Inspect for cracks or leaks. If dropped, perform an accuracy check. If consistently inaccurate, the level may need replacement. |
| Weak Magnetic Hold | Magnets are dirty; Surface is not ferromagnetic; Magnets are damaged. | Clean the magnetic strip on the level. Ensure the surface is suitable for magnetic adhesion. If magnets are physically damaged, the level may need replacement. |
| Bubble does not move freely | Vial is damaged or fluid is frozen. | Inspect the vial for cracks. If used in extremely cold conditions, allow the level to warm up to room temperature. If the issue persists, the level may be damaged. |
Zehaztapenak
- Marka: ESKULANGINTZA
- Modelo zenbakia: CMHT43191
- Materiala: Aluminioa
- Kolorea: Gorria
- Product Dimensions (L x W): 9.72 hazbete x 1.85 hazbete
- Elementuaren pisua: 0.14 kg (gutxi gorabehera 0.31 lb)
- Estiloa: Magnetic Torpedo Level
- Number of Vials: 3 (Horizontal, Vertical, 45-degree)
- Dakarten osagaiak: Torpedo Level (1)
This image illustrates the key dimensions of the CRAFTSMAN Torpedo Level, showing its length as 9.63 inches and width as 1.83 inches.
Bermea eta Laguntza
For detailed warranty information and customer support, please refer to the official CRAFTSMAN webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.
Lineako laguntza: Bisitatu CRAFTSMAN ofiziala website for product registration, FAQs, and support resources.
Bezeroarentzako arreta: Kontsultatu zure produktuaren ontzia edo CRAFTSMANen informazioa. website for contact numbers and service hours.
