LEPOTEC 30-LED Motion Sensor Cabinet Light Instruction Manual

1. Sarrera

Thank you for choosing the LEPOTEC 30-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.

Paketearen edukia:

• LEPOTEC 30-LED Motion Sensor Cabinet Light (2 units)
• USB kargatzeko kablea
• Adhesive Magnetic Strips
• Erabiltzailearen eskuliburua

2. Produktuaren ezaugarriak

• LED teknologia aurreratua: Features 30 side-emitting LED lamp beads for bright (up to 200 lumens) yet soft, non-glare illumination. Constructed from durable aluminum alloy.
• Instalazio erraza: Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included adhesive tape and metal sheet for secure mounting. Lights can be easily removed for charging or relocation.
• Hiru lan-modu: Equipped with a 3-mode switch (ON-OFF-G) for continuous illumination, off, or motion sensor mode.
• USB kargagarria: Integrated 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Offers approximately 3 hours of continuous light or 2-4 weeks in motion sensor mode (based on 10 activations per day) on a full charge.
• Aplikazio zabala: Suitable for various indoor locations such as closets, cabinets, corridors, workshops, basements, garages, and stairwells.

Image: Two LEPOTEC 30-LED Motion Sensor Cabinet Lights, illustrating the product design.

3. Konfigurazioa eta instalazioa

The LEPOTEC cabinet light offers flexible installation options due to its magnetic design.

Instalazio urratsak:

1. Lotura magnetiko zuzena: If installing on an iron surface (e.g., refrigerator, metal cabinet), simply place the light directly onto the surface. The built-in magnet will secure it.
2. Adhesive Magnetic Strip Installation (for non-iron surfaces):
   • Clean the desired installation surface to ensure it is dry and free of dust or grease.
   • Peel off the protective film from one side of the adhesive tape and attach it to the metal plate.
   • Peel off the protective film from the other side of the adhesive tape and firmly press the metal plate onto the cleaned surface.
   • Attach the LEPOTEC cabinet light to the metal plate. The light will magnetically adhere to the plate.

Image: Illustration of the built-in magnet for direct attachment and the adhesive magnetic strip method for non-metal surfaces.

4. Funtzionamendu-argibideak

The LEPOTEC cabinet light features a versatile 3-mode switch and motion sensing capabilities.

Modu aukeraketa:

Locate the switch on the side of the light bar. Slide the switch to select one of the following modes:

• ON: The light will remain continuously on.
• DESaktibatuta: Argia itzali egingo da.
• G (Motion Sensor Mode): In a dark environment, the light will automatically detect human motion within a 10ft/120° range. It will turn on when motion is detected and automatically turn off after 20 seconds of no movement. The motion sensor is designed to activate only in low-light conditions to conserve battery life.

Irudia: Xehetasun handikoa view of the 3-mode switch (G, OFF, ON) and the Type-C charging port.

Image: Explanation of the auto-induction condition, showing the motion sensor activates only in low light (night) and not in bright light (daytime).

5. Mantentzea

Bateria kargatzea:

The light is equipped with a built-in rechargeable battery. When the battery is low, the light output may diminish. To charge:

1. Connect the included USB charging cable to the Type-C charging port on the light bar.
2. Konektatu USB kablearen beste muturra USB elikatze-egokitzaile estandar batera (ez dago barne) edo ordenagailuko USB ataka batera.
3. The charging indicator light will illuminate red during charging.
4. Once fully charged (approximately 3 hours), the indicator light will turn green.
5. Deskonektatu kargatzeko kablea.

Image: Visual representation of the 1000mAh battery, quick charge capability, and charging status indicators (red for charging, green for fully charged).

Garbiketa:

To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

6. Arazoak

If you encounter issues with your LEPOTEC cabinet light, please refer to the following common problems and solutions:

7. Zehaztapenak

8. Bermea eta Laguntza

LEPOTEC is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LEPOTEC 30-LED Motion Sensor Cabinet Light, please contact our customer service team.

Mesedez, kontsultatu zure erosketa-dokumentazioa edo dendariarena. webwebgunea bermearen xehetasun zehatzak eta harremanetarako informazioa lortzeko.