Sarrera
Thank you for choosing the Ninestars DZT-12-13BURG Motion Sensor Trash Can. This product is designed to provide a convenient and hygienic waste disposal solution with its advanced infrared motion sensor technology. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
Segurtasun Informazioa
- Do not immerse the lid in water or any other liquid. The lid contains electronic components that can be damaged by moisture.
- Garbitu estalkia iragarkiarekinamp oihal bakarra.
- Avoid direct sunlight on the sensor window, as this may interfere with its operation.
- Do not force the lid open or closed manually, as this may damage the gear system.
- Keep the trash can away from children and pets to prevent accidental injury or damage.
- Erabili zehaztutako bateria mota soilik eta ziurtatu polaritate zuzena dela instalazioan zehar.
- Bota erabilitako bateriak tokiko araudiaren arabera.
Paketearen edukia
Egiaztatu osagai guztiak paketean daudela:
- Trash Can Base
- Motion Sensor Lid
- Liner Ring
Konfigurazioa
1. Bateriaren instalazioa
- Kokatu bateriaren konpartimendua estalkiaren beheko aldean.
- Ireki bateriaren konpartimenduaren estalkia.
- Insert 2 'AA' size batteries (not included) according to the polarity indicators (+/-).
- Itxi bateriaren konpartimenduaren estalkia ondo.
2. Liner Ring and Trash Bag Installation
- Remove the liner ring from the trash can base.
- Place a standard trash bag (approximately 3-gallon capacity) into the trash can base.
- Fold the top edge of the trash bag over the liner ring. Ensure the bag is securely held by the ring.
- Insert the liner ring with the trash bag back into the trash can base. The liner ring helps to conceal the trash bag and keep it in place.

Image: The lid is open, revealing the black liner ring inside the burgundy trash can. The infrared sensor is visible on the underside of the lid.
3. Attaching the Lid
Carefully place the motion sensor lid onto the trash can base, ensuring it sits securely.
4. Hasierako kokapena
Place the trash can in your desired location. Ensure there are no obstructions directly above the sensor that could trigger it unintentionally.

Irudia: Aurrealdea view of the Ninestars DZT-12-13BURG Motion Sensor Trash Can in burgundy, with its sleek, rectangular design and black motion sensor lid.
Funtzionamendu-argibideak
1. Piztu/Itzaltzea
Locate the power switch on the back of the lid. Flip the switch to the 'ON' position to activate the motion sensor. Flip it to 'OFF' to deactivate the sensor and conserve battery life when not in use.

Irudia: Atzealdea view of the burgundy trash can, highlighting the black lid with a red power switch in the 'ON' position.
2. Mugimendu-sentsorearen funtzionamendua
- Once powered on, the infrared sensor is active.
- Wave your hand or an object within 10 inches (25 cm) above the sensor window.
- Tapa automatikoki irekiko da.
- The lid will remain open for approximately 5 seconds, then close automatically.
- If an object remains within the sensor's range, the lid will stay open until the object is removed.
3. Manual Override (Stay Open Function)
While the lid is open, you can press the 'OPEN' button (if present on your model, typically near the sensor) to keep the lid open for longer periods. Press the 'CLOSE' button to close it manually, or it will close automatically after a set time if no 'OPEN' button is available and the sensor is clear.
Mantentzea
1. Cleaning the Trash Can
- Estalkia: Wipe the lid with a soft, damp cloth. Do not use abrasive cleaners or immerse the lid in water.
- Oinarria: The stainless steel and plastic base can be cleaned with a mild detergent and a soft cloth. Rinse thoroughly and dry immediately to prevent water spots.
- Sentsorearen leihoa: Keep the sensor window clean and free of dust or debris to ensure optimal performance. Use a soft, dry cloth to gently wipe it.
2. Bateria ordezkatzea
When the lid's operation becomes slow or inconsistent, it is time to replace the batteries. Follow the battery installation steps in the Setup section.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Lid does not open when sensor is activated. | 1. Pizteko etengailua itzalita dago. 2. Bateriak agortuta edo gaizki instalatuta daude. 3. Sensor window is dirty or obstructed. 4. Direct sunlight interfering with sensor. | 1. Turn power switch to 'ON'. 2. Ordeztu bateriak berriekin, polaritate zuzena ziurtatuz. 3. Clean sensor window with a soft, dry cloth. 4. Relocate the trash can away from direct sunlight. |
| Tapa behin eta berriz edo ustekabean ireki eta ixten da. | 1. Object too close to sensor. 2. Sensor window is dirty. 3. Strong light source interfering. | 1. Ensure nothing is within 10 inches of the sensor when not in use. 2. Clean sensor window. 3. Relocate the trash can away from strong light sources. |
| Lid closes too slowly or not completely. | Bateria baxua. | Ordeztu bateriak berriekin. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | DZT-12-13BURG |
| Edukiera | 12 litro (3.2 litro) |
| Irekitzeko Mekanismoa | Mugimendu-sentsorea |
| Materiala | Plastikoa, altzairu herdoilgaitza |
| Kolorea | Borgoina |
| Produktuaren neurriak | 12.01 x 8.54 x 14.13 hazbete (L x W x H) |
| Elementuaren pisua | 3.33 kilo |
| Energia iturria | 2 x 'AA' bateria (ez daude barne) |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







