ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight User Manual

1. Sarrera

Thank you for choosing the ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference. This product complies with EN60598-1 and other specific standards.

2. Segurtasun-argibideak

• Deskonektatu beti zirkuitu nagusiko etengailu elektrikoa instalazioa, mantentze-lanak edo bonbilla ordezkatu aurretik.
• Installation should be performed by a qualified electrician in accordance with all local electrical codes and regulations.
• Produktu hauentzat diseinatuta dago barruko erabilera soilikEz instalatu leku heze edo lehorretan.amp kokapenak.
• Ensure the ceiling material can support the weight of the fixture.
• Ez gainditu gehienezko wat-atag50W-ko potentzia GU10 bonbillarentzat.
• Saihestu bonbilla esku hutsekin zuzenean ukitzea, olioak bonbillaren iraupena murriztu baitezake.
• Mantendu material sukoiak argiztapen-gailutik urrun.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• 1x Recessed Spotlight Housing (White Aluminum)
• Muntatzeko Hardwarea
• Kable elektrikoa
• Itsasgarria

Image 1: Components of the ONE Light Trimless Recessed Spotlight, showing the mounting bracket and the light housing.

4. Konfigurazioa eta instalazioa

This trimless recessed spotlight requires careful installation to achieve a seamless finish. Professional installation is recommended.

4.1 Dimensions and Preparation

Before cutting, ensure the chosen location avoids joists, pipes, or electrical wires. Refer to the dimensional diagram for precise cutout requirements.

Image 2: Dimensional diagram of the ONE Light Trimless Recessed Spotlight, indicating a 60mm diameter and 40mm height.

4.2 Instalazio-urratsak

1. Itzali energia: Ziurtatu instalazio-eremuko energia-hornidura nagusia etengailu magnetotermikoan itzalita dagoela.
2. Sabaiaren irekidura prestatu: Using the provided dimensions (60mm diameter), cut a precise hole in the ceiling. For trimless installation, additional plastering work around the fixture may be required after mounting the housing.
3. Hari-konexioak: Connect the electrical cord from the spotlight housing to your main electrical wiring. Ensure all connections are secure and insulated according to local electrical codes.
4. Mendiko etxebizitza: Insert the spotlight housing into the ceiling opening. Use the provided mounting hardware to secure the housing firmly in place. For a trimless finish, the housing should be flush with the ceiling surface, ready for plastering.
5. GU10 bonbilla instalatu: Once the housing is securely installed and any finishing work is complete, insert a GU10 bulb (max 50W) into the lamp holder. Twist to lock it in place.
6. Azken Batzarra: Insert the inner light component into the outer housing.
7. Berrezarri boterea: Instalazioa amaitutakoan eta konexio guztiak ondo finkatuta daudenean, berrezarri korrontea etengailu elektrikoan.

5. Funtzionamendu-argibideak

The ONE Light 10105TR/W spotlight operates via a standard wall switch connected to its electrical circuit. This fixture is ez erregulagarria.

5.1 Bonbilla ordezkatzea

To replace the GU10 bulb:

1. Itzali energia: Always disconnect power at the circuit breaker before replacing the bulb.
2. Utzi hozten: Let the old bulb cool down completely before touching it.
3. Remove Bulb: Gently push the bulb upwards and twist it counter-clockwise to release it from the GU10 base.
4. Txertatu bonbilla berria: Align the pins of the new GU10 bulb with the slots in the lamp holder. Push upwards and twist clockwise to secure it. Ensure the new bulb is a GU10 type and does not exceed 50W.
5. Berrezarri boterea: Berrezarri energia etengailuan.

6. Mantentzea

The ONE Light 10105TR/W spotlight requires minimal maintenance.

• Garbiketa: Ensure the power is off and the fixture is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: Other than bulb replacement, there are no user-serviceable parts inside the fixture. Do not attempt to disassemble the unit.

7. Arazoak

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Argia ez da pizten:
  • Check if the power supply to the fixture is on at the circuit breaker and wall switch.
  • Ziurtatu GU10 bonbilla behar bezala instalatuta dagoela eta ez dagoela akastun. Saiatu funtzionatzen duen bonbilla batekin ordezkatzen.
  • Verify electrical connections are secure (consult a qualified electrician if unsure).
• Argi-distirak:
  • Ensure the GU10 bulb is fully seated and twisted into the base.
  • The bulb may be faulty or nearing the end of its life. Replace the bulb.
  • Egiaztatu kable-konexio solteak dauden (kontsultatu elektrizista kualifikatu bati).

8. Zehaztapenak

Image 3: EU Energy Label for the luminaire, indicating compatibility with bulbs of various energy classes from A++ to E.

9. Bermea eta Laguntza

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to your seller or the ONE Light customer service department.