FLEXISPOT Comhar Electric Standing Desk (Model B08WXFMPQQ) User Manual

1. Sarrera

This manual provides essential instructions for the assembly, operation, and care of your FLEXISPOT Comhar Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Image: The FLEXISPOT Comhar Electric Standing Desk, featuring a bamboo-look desktop, black frame, integrated drawer, and control panel with USB ports.

2. Segurtasun informazioa

• Always ensure the desk is properly assembled and anchored.
• Ez gainditu 100 lb (45 kg) gehienezko pisuaren muga.
• Exercise caution when adjusting the desk height to prevent injury or damage to objects.
• Mantendu haurrak eta maskotak mahaitik urrun funtzionamenduan zehar.
• Ensure all cables are properly managed to avoid entanglement during height adjustments.
• Ez jarri likidorik zuzenean kontrol-panelean edo osagai elektrikoen ondoan.

3. Paketearen edukia

Muntaketa hasi aurretik, egiaztatu osagai guztiak daudela:

• Desktop (Bamboo-Look Laminate)
• Adjustable Frame (Black)
• Electric Motor Lift Mechanism
• Integrated Storage Drawer
• Control Panel with USB Charge Ports (Type-A and Type-C)
• Muntaketa-tresneria (torlojuak, Allen giltza)
• Argibide eskuliburua (dokumentu hau)

4. Muntatzeko jarraibideak

The FLEXISPOT Comhar Electric Standing Desk is designed for easy assembly. The tabletop comes as a single piece, simplifying the process. Follow these steps carefully:

4.1. Markoen Muntaketa

1. Deskonprimitu osagai guztiak eta jarri gainazal garbi eta leun batean marradurak saihesteko.
2. Attach the drive rod to the motor and the opposite leg. Ensure the bolt is loose enough to rotate the drive rod if needed for proper fit, but do not rotate over 60 degrees.
3. Connect the two leg frames using the crossbar. Ensure the pilot holes align with the bulges on the columns. Secure with screws.
4. Attach the desk feet to the bottom of the leg columns. Pay attention to the direction of the desk feet; the long side should face the front.

Video: FLEXISPOT ET156W-C Installation Guide. This video demonstrates the assembly process for the desk frame and attachment to the desktop.

4.2. Attaching Desktop and Wiring

1. Carefully place the assembled frame onto the underside of the desktop. Align the screw holes.
2. Secure the frame to the desktop using the provided screws and tools.
3. Install the adaptor holder onto the beam, next to the motor, ensuring the narrow side faces the motor.
4. Connect all necessary cables: the motor cable, control panel cable, and power cable. Ensure secure connections. Use cable management clips if provided to keep wires tidy.

Image: Diagram illustrating the desk dimensions (47.4" x 23.8") and key components: Desktop, Desk frame, and Desk feet.

Image: Close-up of the smart control panel, highlighting height memory presets (1, 2, 3, 4), Type-C and Type-A USB ports, child lock, and up/down movement buttons.

5. Funtzionamendu-argibideak

5.1. Electric Height Adjustment

The desk features a robust motor for smooth height transitions. Use the up and down arrow buttons on the control panel to adjust the desk height between 28.9 inches and 46.5 inches.

Image: Visual representation of the desk's height adjustment range, from a minimum of 28.9 inches to a maximum of 46.5 inches.

5.2. Programmable Height Presets

The control panel includes four programmable height presets (1, 2, 3, 4). To save a desired height:

1. Egokitu mahaia nahi duzun altuerara gora/behera geziak erabiliz.
2. Press the 'M' button, then press the desired number button (1, 2, 3, or 4) to save the current height.
3. Gordetako altuera berreskuratzeko, sakatu dagokion zenbaki-botoia.

5.3. USB Charge Ports

The integrated USB ports (Type-A and Type-C) allow you to charge up to three devices. Note that USB ports may temporarily pause charging while the desk height is being adjusted.

5.4. Talkaren aurkako teknologia

The desk is equipped with an anti-collision feature. If an obstacle is detected during height adjustment, the desk will automatically stop and reverse slightly to prevent damage.

Image: The desk's anti-collision feature is demonstrated, showing the desk stopping and reversing upon encountering an obstacle.

6. Mantentzea

• Aldian-aldian ikuskatu torloju eta konexio guztiak ondo estuak daudela ziurtatzeko.
• Garbitu mahaigainaren gainazala oihal leun eta lehor batekinamp oihal. Saihestu garbitzaile urratzaileak edo produktu kimiko gogorrak.
• Mantendu motorra eta osagai elektrikoak hauts eta hezetasunetik libre.
• Do not attempt to disassemble or repair the motor or control unit yourself. Contact customer support for assistance.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

This FLEXISPOT Comhar Electric Standing Desk comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or visit the official FLEXISPOT webgunea.

For further assistance, you may contact FLEXISPOT customer support directly.