LEPOTEC 54-LED Motion Sensor Cabinet Light Instruction Manual (Model L54-2-warm)

Sarrera

Thank you for choosing the LEPOTEC 54-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting solution. Please read this manual thoroughly before use and retain it for future reference.

Paketearen edukia

2 x LEPOTEC 54-LED Motion Sensor Cabinet Lights
2 x Iron Sheets (for magnetic mounting)
1 x USB kargatzeko kablea
2 x Adhesive Tapes
1 x Erabiltzailearen eskuliburua

Produktua amaituview

The LEPOTEC 54-LED Motion Sensor Cabinet Light features 54 lamp beads for bright, soft, and non-glare illumination. Constructed from aluminum alloy, it boasts a slim profile and versatile functionality.

LEPOTEC 54-LED Motion Sensor Cabinet Light with dimensions and charging details — **Irudia:** Amaituview of the LEPOTEC 54-LED Motion Sensor Cabinet Light, showing its dimensions (12.5"L x 1.6"W x 0.4"H), 2500mAh battery capacity, quick charge capability (fully charged in 3 hours), and charging status indicators (red for charging, green for fully charged). It also highlights that it's rechargeable, eliminating the need for frequent battery exchange.

Instalazioa

The light features a built-in magnet for easy attachment and removal. Follow these steps for installation:

Eranskin magnetikoa: The light has a built-in magnet. It can be directly absorbed onto any ironwork surface.
Itsasgarriaren muntaketa: For non-iron surfaces, use the included adhesive tape to attach the iron sheet to your desired location. Once the iron sheet is secured, the light can be magnetically attached to it.
Kentzea: When charging or relocating, simply detach the light from the magnetic strip or ironwork.

Installation steps for the LEPOTEC Motion Sensor Cabinet Light — **Irudia:** Step-by-step guide illustrating the installation process. It shows attaching the iron piece to the desired surface using adhesive tape, then magnetically securing the light to the iron piece. This method allows for easy removal for charging or repositioning.

Funtzionamendu moduak

The light features a 3-mode switch (On-Off-G) to adjust its operation:

ON modua: Argia etengabe piztuta dago.
OFF modua: Argia itzalita dago.
G (Motion Sensor) Mode: In dark environments, the light automatically senses human motion within a 10ft/120° range and turns off after 20 seconds of no movement.

LEPOTEC Motion Sensor Cabinet Light 3-mode switch — **Irudia:** Close-up of the light's control panel, highlighting the Type-C charging port, charging indicator, and the 3-mode switch (G, OFF, ON) for motion sensing, no light, and continuously lighting modes.

Motion Sensor Conditions

Under G (Motion Sensor) Mode, the sensor is only activated in low-light conditions. It will not turn on if sufficient ambient light is detected.

Auto-induction condition for LEPOTEC Motion Sensor Cabinet Light — **Irudia:** Illustration of the auto-induction condition. In a bright light environment (daytime), the inductor will not be triggered, and the light will remain off. In a low light environment (night), it turns on automatically if motion is sensed within a 10ft/120° range and extinguishes after 20 seconds of no movement.

Kargatzen

The light features a built-in 2500mAh high-capacity rechargeable battery. It is easily charged via the included USB cable.

Kargatzeko denbora: Gutxi gorabehera 3 ordu karga osoa lortzeko.
Bateriaren iraupena: About 3 hours in ON mode, and 2-4 weeks in G (Motion Sensor) mode (activating 10 times a day).
Kargatzeko adierazlea: A red light indicates charging, and a green light indicates a full charge.

Erabilera eszenatokiak

This versatile light can be used in various indoor locations to provide convenient illumination:

Various usage scenarios for LEPOTEC Motion Sensor Cabinet Light — **Irudia:** Examples of where the light can be used, including handheld, in a car trunk, on stairs, and in a children's room. Icons also suggest use in children's rooms, washrooms, kitchens, cupboards, stairs, car trunks, garages, and outdoors.

Arazoak konpontzea

Light not turning on in G Mode: Ensure the environment is dark enough. The sensor will not activate if sufficient ambient light is detected.
Interference between lights: Do not place two motion-activated LED night lights too close to each other, as they can interact and cause one or both products to malfunction.

Zehaztapenak

Ezaugarri	Xehetasuna
Marka	LEPOTEC
Modelo zenbakia	L54-2-warm
Kolorea	Silver-warm White Light
Materiala	Aluminioa
Produktuaren neurriak	12.5"L x 1.6"Z x 0.4"A
Energia iturria	Bateriak (USB kargagarria)
Bateria mota	Litio polimeroa (2500 mAh)
Argi iturri mota	LED (54 l)amp aleak)
Distira	300 lumen
Kolore Tenperatura	3500 Kelvin (Warm White Light)
Ezaugarri Berezia	Mugimendu-sentsorea
Instalazio mota	Surface Mount (Magnetic/Adhesive)
Barruko/Kanpoko erabilera	Barruan
Elementuaren pisua	13.3 ontza

Bezeroarentzako Arreta

For any questions, concerns, or technical assistance, please refer to the contact information provided with your purchase or visit the official LEPOTEC webgunea.

LEPOTEC L54-2-warm

LEPOTEC 54-LED Motion Sensor Cabinet Light

Model: L54-2-warm