Yaheetech 4-Piece White Dining Chairs Instruction Manual

1. Sarrera

This manual provides comprehensive instructions for the assembly, safe use, and proper maintenance of your Yaheetech 4-piece dining chairs. These chairs are designed with a high back, comfortable leather-look seat, sturdy wood legs, and a waterproof surface, making them suitable for indoor use in dining rooms, kitchens, or restaurants.

Image 1.1: Yaheetech 4-Piece White Dining Chairs in a dining room setting.

2. Segurtasun informazioa

• Barruko erabilera soilik: These chairs are designed exclusively for indoor environments. Exposure to outdoor elements may cause damage and void the warranty.
• Pisu-gaitasuna: Do not exceed the maximum weight capacity of 135 kg (297.6 lbs) per chair. Overloading can lead to structural failure and injury.
• Muntatzearen kontua: Exercise caution during assembly. Ensure all parts are correctly aligned and fasteners are securely tightened to prevent instability.
• Zoruaren babesa: Use anti-skid protection or felt pads on the chair legs to prevent slipping and protect floor surfaces from scratches or damage.
• Ohiko ikuskapena: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa daudela ziurtatzeko. Behar izanez gero, berriro estutu.
• Saihestu zutik egotea: Do not stand on the chairs. They are designed for seating purposes only.

3. Paketearen edukia

Muntaketa hasi aurretik, egiaztatu behean zerrendatutako osagai guztiak daudela eta kalterik gabe daudela. Piezarik falta edo kaltetuta badago, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.

• 4 x Chair Backrests
• 4 x Chair Seats
• 16 x Chair Legs (4 per chair)
• Hardware paketea (torlojuak, arandelak, Allen giltza)
• 1 x Erabiltzailearen eskuliburua

Image 3.1: Key components and features of the dining chair.

4. Muntatzeko jarraibideak

Assembly typically requires two people. Please follow these steps carefully:

1. Deskonprimitu osagaiak: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., carpet or a blanket) to prevent scratches.
2. Atalak identifikatzea: Refer to the parts list in Section 3 to identify each component.
3. Lotu hankak eserlekuari: Align the pre-drilled holes on each chair leg with the corresponding holes on the underside of the chair seat. Insert the provided screws and washers.
4. Hankak seguru: Using the Allen wrench, hand-tighten all screws initially. Do not fully tighten until all legs are in place.
5. Lotu bizkarraldea: Connect the backrest to the seat frame, ensuring proper alignment. Insert and hand-tighten the screws.
6. Azken estutzea: Once all components are assembled, place the chair upright on a level surface. Apply gentle pressure to the seat, then fully tighten all screws. This helps ensure the chair is level and stable.
7. Egiaztatu egonkortasuna: Gently rock the chair to ensure it is stable and does not wobble. If wobbling occurs, loosen the screws slightly, adjust the chair on a flat surface, and re-tighten.

5. Erabilera-gidalerroak

These dining chairs are designed for comfortable and functional use in your home or commercial setting.

• Eserlekuak: Use the chairs for seating purposes only. Avoid standing on them or using them as step stools.
• Lekua: Position chairs on a flat, stable surface to prevent tipping.
• Pisuaren banaketa: Distribute weight evenly on the seat. Avoid placing excessive weight on the edges or backrest.
• Mugimendua: When moving chairs, lift them rather than dragging them to prevent damage to legs and floor surfaces.

Image 5.1: Demonstration of the high-density foam for comfort.

6. Zainketa eta Mantentzea

Proper care will extend the life and appearance of your dining chairs.

• Garbiketa: The PVC leather surface is waterproof. Wipe clean with a soft, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or harsh chemicals.
• Isurketak: Promptly clean up any spills to prevent staining, especially on the wood legs.
• Eguzkiaren argiaren esposizioa: Avoid prolonged direct sunlight exposure, which can cause the PVC leather to fade or crack over time.
• Bero iturriak: Keep chairs away from direct heat sources like radiators or fireplaces to prevent material damage.
• Hankak zaintzea: For the wood legs, wipe with a dry cloth. If necessary, use a wood-safe cleaner.

Image 6.1: Waterproof PVC leather surface for easy cleaning.

7. Arazoak

If you encounter any issues with your dining chairs, refer to the following common problems and solutions:

Issue: Chair wobbles after assembly.

• 1. irtenbidea: Ensure all screws are fully tightened. Loosen them slightly, place the chair on a flat surface, apply gentle pressure to the seat, and then re-tighten all screws.
• 2. irtenbidea: Check if the floor surface is uneven. Try moving the chair to a different spot or using shims under the legs if necessary.

Issue: Screws become loose over time.

• Irtenbidea: This is normal for furniture. Periodically (e.g., every 3-6 months) check and re-tighten all assembly screws to maintain stability.

Arazoa: Marradurak lurrean.

• Irtenbidea: Ensure anti-skid pads are properly installed on all chair legs. Replace worn pads as needed.

8. Produktuaren zehaztapenak

Image 8.1: Dining chair dimensions.

9. Bideo-erakustaldia

Watch this official product video for a visual guide on the features and design of the Yaheetech 4-piece PU leather dining chairs.

10. Bermea eta Laguntza

Yaheetech provides customer support for its products. While specific warranty details are not provided in this manual, the product typically includes a 30-day easy return policy. For any questions, concerns, or to report missing/damaged parts, please contact the seller or manufacturer directly through your purchase platform.

Gorde erosketa-agiria bermearen erreklamazioetarako edo laguntza-kontsultak egiteko.