XLTTY 16-inch Pedestal Fan Instruction Manual

1. Sarrera

Eskerrik asko erosketagatik.asing the XLTTY 16-inch Pedestal Fan. This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your fan. Please read these instructions thoroughly before use and retain them for future reference.

2. Segurtasun-argibide garrantzitsuak

• Ziurtatu beti haizagailua gainazal egonkor eta mailakatu batean jartzen dela, iraultzea saihesteko.
• Do not insert fingers or any objects through the fan grille when the fan is operating.
• Unplug the fan from the power outlet before cleaning, assembling, or disassembling parts.
• Mantendu haizagailua uretatik edo beste likido batzuetatik urrun. Ez erabili ingurune hezeetan.
• Ez erabili haizagailua kablea edo entxufea hondatuta badago. Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin laguntza jasotzeko.
• Tresna hau ez da gaitasun fisiko, sentsorial edo mental murriztua duten edo esperientzia eta ezagutza falta duten pertsonek (haurrak barne) erabiltzeko, baldin eta haien segurtasunaz arduratzen den pertsona batek gailuaren erabilerari buruz gainbegiratu edo jarraibiderik eman ez badu.
• Ziurtatu liburukiatage and frequency of your power supply match the specifications listed on the fan's rating label.

3. Paketearen edukia

Egiaztatu osagai guztiak paketean daudela:

• 1 x Stand Fan Unit (includes motor, fan blades, grilles, stand pole, and base)
• 1 x Argibide eskuliburua

4. Konfigurazioa eta Muntaketa

Follow these steps to assemble your XLTTY 16-inch Pedestal Fan:

1. Oinarria muntatu: Place the heavy fan base on a flat surface. Insert the lower stand pole into the base and secure it firmly.
2. Attach the Upper Pole: Insert the adjustable upper stand pole into the lower pole.
3. Motor unitatea muntatu: Carefully attach the motor unit to the top of the upper stand pole. Ensure it is securely fastened.
4. Atzeko parrilla instalatu: Place the rear grille onto the motor unit, aligning the notches.
5. Lotu haizagailuaren palak: Slide the five fan blades onto the motor shaft. Secure them with the blade cap.
6. Aurrealdeko parrilla instalatu: Place the front grille over the fan blades and secure it to the rear grille using the provided clips or screws. Ensure the grilles are properly aligned and locked.

Irudia: Diagram showing the dimensions of the XLTTY 16-inch Pedestal Fan, including height (1200mm) and fan diameter (410mm). The adjustable height range is also indicated.

Irudia: Xehetasuna view of the fan's stable base, shaped ring net cover, and easy-to-use control panel with speed and timer settings.

Altuera eta inklinazioa doitzea

• Altuera doitzea: Loosen the height adjustment knob on the stand pole, extend or retract the upper pole to the desired height (between 108 cm and 120 cm), and then tighten the knob securely.
• Inklinazio doikuntza: The fan head can be tilted up or down by 20 degrees. Gently push or pull the fan head to achieve the desired angle.

5. Funtzionamendu-argibideak

Once assembled, plug the fan into a suitable 220V/50Hz power outlet.

Piztu/Itzaltzea

• Haizagailua pizteko. ON, rotate the control knob to any speed setting (1, 2, or 3).
• Haizagailua pizteko. OFF, rotate the control knob to the '0' position.

Abiadura eta Moduaren Hautaketa

The fan offers three speed settings and various modes:

• Abiadura ezarpenak: Rotate the control knob to select between 1 (Baxua), 2 (Ertain), eta 3 (Altua).
• Moduak: The fan supports Natural, Normal, and Sleep modes. These are typically selected via a remote control (if included) or dedicated buttons on the control panel. Refer to the specific button labels for mode selection.

Irudia: Visual representation of the three wind speed settings (First, Second, Third gear) suitable for various scenarios, from sleeping to active use.

Oszilazio Funtzioa

The fan features a 120-degree oscillation function to distribute air across a wider area.

• To activate oscillation, press the oscillation button (if available) or pull up the oscillation knob located on top of the motor housing.
• To stop oscillation and direct airflow in a fixed direction, press down the oscillation knob.

Irudia: Image illustrating the 120-degree left-right oscillation and 20-degree up-down tilt capabilities of the fan head, enhancing air distribution.

Tenporizadorearen funtzioa

The fan includes a 2-hour timer for scheduled operation.

• To set the timer, rotate the timer knob to the desired duration (e.g., 1 hour, 2 hours). The fan will automatically turn off after the set time has elapsed.
• This feature is particularly useful for energy saving during sleep.

Irudia: Image depicting the fan operating with its 2-hour timer function, suitable for use during sleep to prevent overcooling.

6. Mantentzea eta Zainketa

Mantentze-lan erregularrak zure haizagailuaren errendimendu optimoa eta iraupen luzea bermatzen ditu.

• Garbiketa: Deskonektatu beti haizagailua garbitu aurretik. Erabili zapi leun eta lehorra.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. For the grilles and blades, use a soft brush or vacuum cleaner to remove dust.
• Biltegiratzea: If storing the fan for an extended period, disassemble it if necessary, clean all parts, and store it in its original packaging or a dust-free environment.
• Motorra: The motor is permanently lubricated and requires no additional oiling.

7. Arazoak

Ikusi beheko taula arazo ohikoenak eta haien irtenbideak ikusteko.

8. Produktuaren zehaztapenak

Irudia: Gertutik view of the five bionic fan blades designed for efficient and soft airflow.

Irudia: Illustration highlighting the 4S motor, indicating quiet and powerful operation for consistent air movement.

9. Bermea eta Laguntza

For warranty information or technical support, please refer to the retailer where the product was purchased or contact XLTTY customer service directly. Keep your purchase receipt as proof of purchase.