Vancer Gretxa Wireless Ultralight Gaming Mouse User Manual

1. Sarrera

Thank you for choosing the Vancer Gretxa Wireless Ultralight Gaming Mouse. This manual provides essential information for setting up, operating, and maintaining your new gaming mouse. Please read it thoroughly to ensure optimal performance and longevity of your device.

Paketearen edukia

The Vancer Gretxa Wireless Ultralight Gaming Mouse package includes the following items:

• Vancer Gretxa Wireless Gaming Mouse
• USB-C to USB-A Charging Cable (Red)
• USB Extension Dongle
• Haririk gabeko Hargailuaren Dongle
• Extra Set of PTFE Skates
• Hasierako gida azkarra

2. Konfigurazioa

2.1 Connecting the Wireless Receiver

1. Locate the wireless receiver dongle.
2. Plug the receiver dongle into an available USB-A port on your computer. For optimal signal strength, use the provided USB extension dongle to place the receiver closer to the mouse.
3. Turn on the mouse using the power switch located on the underside of the mouse.
4. Your computer should automatically detect the mouse. No additional drivers are typically required for basic functionality on Windows 10.

2.2 Sagua kargatzea

The Vancer Gretxa mouse is equipped with a rechargeable Lithium Ion battery.

1. Connect the USB-C end of the charging cable to the front port of the mouse.
2. Connect the USB-A end of the charging cable to an available USB-A port on your computer or a USB wall adapter.
3. Sagua kable bidezko moduan erabil daiteke kargatzen ari den bitartean.
4. A full charge typically takes a few hours. The LED indicator on the mouse will change to indicate charging status (refer to the Quick Start Guide for specific LED behaviors).

2.3 Aukerako software instalazioa

For advanced customization, such as remapping buttons, adjusting DPI steps, or configuring macros, Vancer may provide optional software. Please visit the official Vancer website for the latest software downloads and installation instructions. Note that some features like RGB lighting may be tied to DPI settings.

3. Funtzionamendu-argibideak

3.1 Basic Mouse Functions

• Ezkerreko klik: Ekintza nagusirako botoia.
• Egin klik eskuineko botoiarekin: Secondary action button, often for context menus.
• Korritzeko gurpila: Edukia bertikalki mugitzen du. Erdiko botoiarekin klik egiteko ere sakatu daiteke.
• Alboko botoiak: Normalean aurrera/atzera nabigatzeko erabiltzen da web browsers or customizable functions in games/software.
• DPI botoia: Aurrezarritako DPI sentsibilitate mailak aldatzen ditu.

3.2 DPI doikuntza

The Vancer Gretxa mouse features a dedicated DPI button, usually located behind the scroll wheel or on the underside, to cycle through different sensitivity settings. The default DPI steps are 400, 800, 1800, 3200, 4800, and 6400. Each step may correspond to a different LED color for visual indication. Press the DPI button to switch between these settings to find your preferred sensitivity.

3.3 Bozketa-tasaren doikuntza

The polling rate determines how often the mouse reports its position to the computer. The Gretxa mouse supports polling rates of 125Hz (8ms), 500Hz (2ms), and 1000Hz (1ms). Higher polling rates generally provide smoother tracking and lower latency. Adjustment of the polling rate is typically done via the optional Vancer software.

3.4 Kable bidezko modua

When the USB-C charging cable is connected to the mouse and your computer, the mouse will automatically switch to wired mode. This allows for continuous use even if the battery is depleted, and can be preferred for competitive gaming to eliminate any potential wireless interference.

4. Mantentzea

4.1 Sagua garbitzea

Garbiketa erregularrak errendimendua eta higienea mantentzen laguntzen du.

• Kanpoaldea: Erabili lipurrik gabeko zapi leun bat dampUrarekin edo garbiketa-soluzio leun batekin garbitu. Saihestu produktu kimiko gogorrak.
• Sentsore: Gently clean the optical sensor on the underside of the mouse with a cotton swab or compressed air to remove dust and debris.
• Korritzeko gurpila: Erabili aire konprimitua gurpil-mekanismoaren inguruan pilatu daitezkeen hautsak edo partikulak garbitzeko.

4.2 Replacing PTFE Skates

The Vancer Gretxa mouse comes with high-quality PTFE skates for smooth gliding. Over time, these may wear down. An extra set of PTFE skates is included in your package for replacement.

1. Carefully peel off the old PTFE skates using a thin, non-abrasive tool.
2. Ensure the surface where the skates were is clean and free of adhesive residue.
3. Peel the backing from the new PTFE skates and carefully align them with the recesses on the mouse's underside.
4. Sakatu irmo atxikimendu egokia ziurtatzeko.

4.3 Bateria zaintzea

• Saihestu bateria maiz erabat deskargatzea.
• Gorde sagua leku fresko eta lehor batean denbora luzez erabiltzen ez duzunean.
• Use only the provided charging cable or a certified USB-C cable to prevent damage.

5. Arazoak

If you encounter issues with your Vancer Gretxa mouse, please refer to the following common solutions:

6. Zehaztapenak

Below are the technical specifications for the Vancer Gretxa Wireless Ultralight Gaming Mouse:

7. Bermea eta Laguntza

7.1 Bermearen informazioa

For the most current and detailed warranty information regarding your Vancer Gretxa Wireless Ultralight Gaming Mouse, please refer to the official Vancer website or the warranty card included with your product. Warranty terms and conditions, including duration and coverage, may vary by region and are subject to change by the manufacturer.

7.2 Bezeroarentzako laguntza

If you require further assistance, have questions not covered in this manual, or need technical support, please visit the official Vancer website. You can typically find FAQs, driver downloads, and contact information for customer service there.