1. Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your REVODATA IPIR-M-POE-FHW 3MP PIR POE IP Camera. This indoor security camera features a 3-megapixel sensor, 3.7mm pinhole lens, 940nm invisible IR LEDs for night vision, and supports Power over Ethernet (PoE) for simplified installation. It is designed for discreet indoor surveillance with H.265/H.264 video compression and P2P remote viewgaitasunak.

Figure 1: REVODATA IPIR-M-POE-FHW Camera with highlighted features.
2. Paketearen edukia
Please check the package carefully to ensure all items are present and in good condition. If any items are missing or damaged, contact your retailer.
- 1 x REVODATA IPIR-M-POE-FHW Camera
- 1 x Erabiltzailearen eskuliburua (ingelesez)
- 1 x Download Card
- 1 x Torloju multzoa

2. irudia: Produktuaren paketean sartutako elementuak.
3. Segurtasun informazioa
- Irakurri arretaz argibide guztiak instalatu eta martxan jarri aurretik.
- Use only the specified power supply (802.3af Standard 48V POE Switch or 12V 2A DC adapter).
- Do not expose the camera to water or moisture. This camera is designed for indoor use only.
- Saihestu kamera bero-iturrien ondoan edo eguzki-argiaren eraginpean jartzea.
- Ziurtatu kameraren inguruan aireztapen egokia.
- Ez saiatu kamera desmuntatzen edo aldatzen. Horrek bermea baliogabetuko du.
- Mantendu haurren eskura.
4. Konfigurazioa
4.1 Instalazio fisikoa
The camera is designed for ceiling mount installation. Choose a location that provides the desired field of view and is within reach of your network cable.
- Mark the drilling points on the ceiling using the camera bracket as a template.
- Drill holes and insert the provided screws to secure the camera bracket.
- Lotu kamera euskarrira.

Figure 3: Camera dimensions and component overview.
4.2 Energia eta sare konexioa
This camera primarily uses Power over Ethernet (PoE) for both power and data transmission. It requires connection to an 802.3af Standard 48V PoE switch.
- Connect an Ethernet cable from your 802.3af PoE switch to the camera's RJ-45 port.
- Alternatively, if a PoE switch is not available, the camera can be powered by a conventional 12V 2A DC power supply (not included) using the auxiliary power connector. In this case, a standard Ethernet connection to a router or switch is still required for data.

Figure 4: POE connection diagram.
4.3 Hasierako sare konfigurazioa
The camera's IP address is set to Dynamic (DHCP) by default. For initial setup and access, you may need to use a network scanning tool to discover the camera's assigned IP address on your network. The ONVIF port is 6688.
- Ensure your computer is on the same local network as the camera.
- Use a network IP scanner tool to find the camera's IP address.
- Kameraren sarbidea web interfazea a bidez web browser (Internet Explorer with VLC plugin is often required for full functionality).
4.4 Softwarearen konfigurazioa
Urrunekorako viewing and management, use the recommended applications:
- Smartphone aplikazioa: Download the free app "NVSEE Int 'I" from your device's app store (iOS, Android, Windows System).
- Ordenagailuaren softwarea: Use the CMS software for Windows computers. (Note: This software is not compatible with Mac OS or Linux).
5. Funtzionamendu-argibideak
5.1 urrunekoa Viewing (P2P)
The camera supports P2P remote viewing, allowing you to access live footage and playback from anywhere using the NVSEE Int 'I smartphone app or CMS software.
- Open the NVSEE Int 'I app on your smartphone or the CMS software on your PC.
- Add the camera to the application by scanning its QR code or manually entering its device ID.
- Behin gehituta, egin dezakezu view live video, capture images, record video, and access playback options.

Figure 5: NVSEE App interface for smartphone viewing.

Figure 6: CMS Software interface for PC viewing.
5.2 Gaueko ikusmena
The camera is equipped with 18pcs 940nm invisible IR LEDs, providing clear night vision up to 5-10 meters. These LEDs are invisible to the naked eye, ensuring discreet operation.
- When ambient light levels drop below a certain threshold, the camera automatically switches from color to black and white mode and activates the IR LEDs.
- The 940nm wavelength ensures that the LED light does not emit a visible red glow, maintaining the camera's covert nature.

Figure 7: IR Night Vision functionality.
5.3 Motion Detection and Email Alarm
Configure motion detection settings through the camera's web interface or the CMS software. You can set detection zones, sensitivity levels, and enable email notifications for triggered events.
5.4 Bideo-konpresioa
The camera supports H.265 and H.264 compression formats. H.265 offers more efficient video storage and bandwidth usage compared to H.264, providing the same quality image with approximately half the bandwidth and storage requirements.
- By default, the camera is set to 3MP resolution and H.265 encoding.
- If your Network Video Recorder (NVR) does not support 3MP or H.265, you can adjust the camera settings to 1080P (2MP) and H.264 via the camera's web interfazea.
6. Mantentzea
6.1 Garbiketa
To maintain optimal performance, regularly clean the camera lens and housing.
- Erabili zapi leun eta lehor bat kameraren gorputza garbitzeko.
- For the lens, use a lens cleaning cloth and a specialized lens cleaning solution to avoid scratches.
- Ez erabili produktu kimiko gogorrik edo garbigailu urratzailea.
6.2 Firmware eguneraketak
Aldian-aldian egiaztatu fabrikatzailearen website for available firmware updates. Firmware updates can improve camera performance, add new features, or address security vulnerabilities. Follow the provided instructions carefully when performing updates.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argindarrik ez / Kamera ez da pizten | Incorrect power supply; Faulty cable; PoE switch issue | Ensure 802.3af PoE switch is active or 12V 2A DC adapter is connected correctly. Check cables for damage. |
| No image/Video feed | Network connectivity issue; Incorrect IP settings; NVR/Software incompatibility | Verify network connection. Use IP scanner to find camera IP. Check if NVR supports 3MP/H.265; if not, change camera settings to 1080P/H.264. Ensure correct ONVIF port (6688) is used. |
| Irudi kalitate eskasa | Dirty lens; Insufficient lighting; Incorrect resolution settings | Clean the camera lens. Ensure adequate lighting or verify night vision is active. Check camera resolution settings. |
| Ezin da kamerara urrunetik sartu | Network configuration; P2P service issue; App/Software not configured | Ensure camera has internet access. Verify P2P settings in the camera. Reconfigure camera in the NVSEE app or CMS software. |
| Bitrate errors on NVR/Blue Iris | NVR/Software settings; Camera encoding settings | Adjust bitrate settings on your NVR or in the camera's web interface. Ensure compatibility between camera and recording device. |
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | IPIR-M-POE-FHW |
| Ebazpena | 3.0 Megapixel (2304 x 1296P) |
| Sentsore | 1/3'' CMOS (FH8852+GC2053) |
| Gutxieneko argiztapena | 0.1Lux @(F1.2,AGC ON) ,0 Lux with IR |
| Lentea | 3.7mm Pinhole Lens, M12 interface |
| Obturatzeko Abiadura | 1/25 seconds - 1/100,000 seconds |
| Konpresio formatua | H.265 / H.264 |
| Fotograma-tasa | 20 fps |
| Biltegiratzea | NVR or Computer |
| IP helbidea | Dynamic (Default) / Static |
| Alarma adimenduna | Motion detection, Email alarm |
| Onartutako protokoloak | ONVIF, HTTP, TCP/IP, ICMP, RTSP, RTP, RTCP, SMTP, DHCP, DNS, PPPoE, NTP |
| Ethernet | 10M/100M mbps (RJ-45) |
| Funtzionamendu-tenperatura | -25 °C ~ 60 °C (-13 °F ~ 140 °F) |
| Funtzionamenduaren hezetasuna | % 10 ~ % 90 |
| Elikatze Hornidura | POE (802.3af Standard) or 12V DC |
| Infragorria Lamps | 18 x 940nm Invisible LEDs |
| Gaueko Ikusmenaren Distantzia | 5-10 metro |
| Neurriak (cm) | 10.2 cm x 6 cm x 2.7 cm |
| Pisua | 0.2 kg (5.5 ontza) |
| Materiala | ABS plastikoa |
9. Bermea eta Laguntza
This product comes with a standard manufacturer's warranty. Please refer to the specific warranty terms provided with your purchase or contact your retailer for details. For technical support, troubleshooting assistance, or further inquiries, please contact REVODATA customer service or visit the official REVODATA webgunea.