1. Sarrera
Welcome to the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This manual provides essential information for the safe and efficient operation of your inverter. The IPower-Plus series is designed to convert 12V DC battery power into 230V AC pure sine wave electricity, suitable for various applications including off-grid home emergency lighting and vehicle-mounted systems.
Key features include a 180-degree rotatable LCD display, compatibility with lithium batteries, and a USB output port. The inverter incorporates surge current suppression technology to protect lithium battery cells and the Battery Management System (BMS) from damage caused by high inrush currents. It also features low idle loss and a sleep mode for enhanced energy efficiency.
2. Segurtasun-argibideak
WARNING: Failure to follow these safety instructions may result in serious injury, death, or damage to the inverter and other equipment.
- Read this entire manual before installation and operation.
- Instalazioa langile kualifikatuek egin behar dute.
- Ziurtatu inbertsorearen inguruan aireztapen egokia gehiegi berotzea saihesteko.
- Do not expose the inverter to water, rain, snow, or any liquids.
- Connect the inverter to a battery bank with the correct voltage (12V DC).
- Observe correct polarity when connecting DC input cables (+ to + and - to -). Reverse polarity will cause damage.
- Ensure all connections are tight and secure to prevent loose connections and arcing.
- Do not connect the inverter to an AC utility grid or other AC power sources.
- Avoid short-circuiting the AC output.
- Mantendu material sukoiak inbertsoretik urrun.
- Ez ireki inbertsorearen casing; ez dago erabiltzaileak konpondu dezakeen piezarik barruan.
- Deskonektatu beti energia mantentze-lan edo garbiketa egin aurretik.
3. Produktua amaitu daview
3.1 Ezaugarriak
- Uhin sinusoidal hutsaren irteera: Kalitate handiko korronte alternoa ematen du, elektronika sentikorrerako egokia.
- 180-Degree Rotatable LCD Display: Malgutasuna ahalbidetzen du. viewing angles of operational data.
- Lithium Battery Compatibility: Designed to work effectively with lithium battery systems.
- USB irteera: Integrated 5VDC / Max.1A USB port for charging small devices.
- Surge Current Suppression: Protects battery cells and BMS from high inrush currents.
- Low Idle Loss / Sleep Mode: Minimizes power consumption when no load or light load is present.
- Isolated RS485 Communication Interface: (Optional) Enables remote monitoring, management, and settings adjustment via PC software or mobile app.
3.2 Osagaiak
The EPEVER IPower-Plus Series IP3000-12 Plus inverter includes the main unit and necessary connection accessories.
1. irudia: Aurrealdea view of the EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter. This image shows the main body of the inverter with its LCD display and branding.
Figure 2: Rear panel of the EPEVER IPower-Plus Series IP3000-12 Plus inverter. This view highlights the DC input terminals, AC output terminals, USB port, and RS485 communication port.
3. Irudia: Behea view of the EPEVER IPower-Plus Series IP3000-12 Plus inverter, showing the integrated cooling fans for thermal management.
Dakarten osagaiak:
- Inbertsore Unitatea
- RS485 Communication Port (integrated)
- USB Output (integrated)
- Lurreko kablea
- DC sarrerako kablea
- AC irteerako kablea
4. Konfigurazioa
4.1 Desontziratzea eta ikuskatzea
- Kontu handiz deskonprimitu inbertsorea eta osagarri guztiak.
- Inspect the unit for any visible damage that may have occurred during shipping. Contact your supplier if any damage is found.
- Verify that all components listed in Section 3.2 are present.
4.2 Muntaketa
- Aukeratu leku lehor eta ondo aireztatua, eguzki-argitik, bero-iturrietatik eta hezetasunetik urrun.
- Ensure there is sufficient clearance around the inverter for proper airflow, especially around the cooling fans.
- Mount the inverter securely to a stable surface using appropriate fasteners. The mounting dimensions are 532 x 145mm.
4.3 Kableatutako konexioak
CAUTION: Before making any connections, ensure the inverter is switched OFF and the battery bank is disconnected or fused.
- Lurreratzea: Connect the ground terminal of the inverter to an earth ground point using the provided ground cable. This is crucial for safety.
- DC sarrerako konexioa:
- Connect the positive (+) terminal of your 12V DC battery bank to the positive (+) DC input terminal on the inverter.
- Connect the negative (-) terminal of your 12V DC battery bank to the negative (-) DC input terminal on the inverter.
- Use appropriate cable gauge for the DC input to minimize voltage jaitsiera eta funtzionamendu segurua bermatzea.
- Korronte alternoko irteerako konexioa:
- Connect your AC loads (appliances) to the AC output terminals of the inverter.
- Ensure the total power consumption of your AC loads does not exceed the inverter's continuous power rating (3000W).
- Optional Connections (RS485 & USB):
- If using the RS485 communication feature, connect the RS485 cable to the designated port for remote monitoring.
- The USB port can be used to charge compatible 5VDC devices.
5. Funtzionamendu-argibideak
5.1 Inbertsorea piztea
- After all connections are securely made and verified, connect the battery bank (if not already connected).
- Switch on the DC input breaker or fuse, if installed.
- Press the power button on the inverter. The LCD display will illuminate, indicating the inverter is operational.
- The inverter will begin converting DC power to AC power.
5.2 Inbertsorearen itzaltzea
- Turn off all connected AC loads.
- Press and hold the power button on the inverter until the display turns off.
- Switch off the DC input breaker or fuse, and disconnect the battery bank if the inverter will not be used for an extended period.
5.3 LCD pantaila
The LCD display provides real-time operational data. It can be rotated 180 degrees for optimal viewing. Information typically displayed includes:
- Sarrera DC boltage
- Irteera AC Voltage
- Irteera potentzia (watt)
- Irteerako maiztasuna (Hz)
- Bateriaren egoera
- Errore kodeak (baldin badaude)
6. Mantentzea
Mantentze-lan erregularrak zure inbertsorearen iraupena eta errendimendu optimoa bermatzen ditu.
- Garbiketa: Periodically clean the exterior of the inverter with a dry cloth to remove dust and debris. Ensure cooling vents are clear. Do not use liquid cleaners.
- Konexioaren egiaztapenak: Annually inspect all electrical connections (DC input, AC output, ground) to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
- Aireztapena: Ensure the area around the inverter remains clear and well-ventilated. Check that the cooling fans are operating correctly when the inverter is under load.
- Bateria mantentzea: Follow the manufacturer's guidelines for your specific battery type. Ensure batteries are properly charged and maintained to prolong their lifespan and ensure stable power supply to the inverter.
7. Arazoak
This section outlines common issues and their potential solutions. If the problem persists, contact customer support.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| No AC Output / Inverter not turning on | Bateria bolumen baxuatage DC konexio solteak Inbertsorearen itzaltzea Blown DC fuse/breaker | Charge battery or check battery health Check and tighten all DC connections Piztu inbertsore-etengailua Check and replace fuse/reset breaker |
| Overload Alarm / Shutdown | Connected load exceeds inverter rating High inrush current from inductive loads | Murriztu konektatutako karga osoa Start inductive loads one at a time; consider a higher capacity inverter if frequent |
| Overheating Alarm / Shutdown | Aireztapen eskasa Giro-tenperatura gehiegizkoa Karga handia etengabe | Ziurtatu aire-fluxu garbia inbertsorearen inguruan Relocate inverter to a cooler environment Reduce load or operate intermittently |
| Abnormal AC Output Voltage/Maiztasuna | DC sarrera bolumen baxuatage Faulty inverter | Egiaztatu bateria bolumenatage eta konexioak Jarri harremanetan bezeroarentzako laguntzarekin |
| USB ataka ez dabil | Overload on USB port Faulty USB device | Disconnect and reconnect USB device Try a different USB device |
7.1 Babes-funtzioak
The inverter is equipped with extensive protection features:
- Alderantzizko polaritatearen babesa: Prevents damage from incorrect DC input wiring.
- Bolumen gehiegitage Babesa: Shuts down if DC input voltage exceeds safe limits.
- Bolumen azpikoatage Babesa: Shuts down to protect batteries from over-discharge.
- Gainkarga babesa: Shuts down if AC output load exceeds rated capacity.
- Zirkuitu laburren babesa: Protects against damage from AC output short circuits.
- Tenperaturaren gaineko babesa: Shuts down if internal temperature becomes too high.
8. Zehaztapenak
| Parametroa | Balioa |
|---|---|
| Sistemaren bateriaren bolumenatage | 12V DC |
| Etengabeko boterea | 3000W |
| Surge Power (5s) | 6000W |
| Irteera AC Voltage | 220VAC (±3%); 230VAC (-7% ~ +3%) |
| Irteerako maiztasuna | 50 / 60Hz ±0.2% |
| Eraginkortasun handiena | >94% (30% load) |
| Kargarik Gabeko Korrontea | <1.6A |
| USB irteera | 5VDC / Max.1A |
| RS485 Interface Output | 5VDC / 200mA |
| Babes Klasea | IP20 |
| Neurriak (L x W x H) | 557 × 231.5 × 123 mm |
| Muntatzeko neurriak | 532 x 145 mm |
| Pisu garbia | 10.5kg |
| Irteerako uhin forma | Sine Wave Pure |
| Ziurtagiriak | CE, RoHS |
9. Bermea eta Laguntza
9.1 Bermearen informazioa
The EPEVER IPower-Plus Series IP3000-12 Plus Pure Sine Wave Inverter comes with a 2 urteko fabrikatzailearen bermea erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera eta zerbitzu normalaren pean.
Bermeak ez ditu estaltzen:
- Damage caused by improper installation or wiring.
- Baimenik gabeko konponketa edo aldaketek eragindako kalteak.
- Damage caused by natural disasters, accidents, or misuse.
- Damage from operating the inverter outside its specified environmental limits.
9.2 Laguntza Teknikoa
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your EPEVER dealer or the official EPEVER customer support channel. Please have your product model number and purchase information ready when contacting support.