Nady DW-11-LT-HM

Nady DW-11-LT-HM Digital Wireless Lapel & Headset Microphone System

Erabiltzailearen eskuliburua

Sarrera

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Nady DW-11-LT-HM Digital Wireless Lapel & Headset Microphone System. This system delivers superior digital audio quality with ultra-low latency and reliable performance in the UHF 900MHz band. Please read this manual thoroughly before using the system to ensure optimal performance and longevity.

Segurtasun Informazioa

  • Ez jarri unitatea euri edo hezetasunera.
  • Ez ireki c-a.asing; bidali mantentze-lan guztiak langile kualifikatuen esku.
  • Use only the specified power adapter for the receiver.
  • Ensure proper battery polarity when installing batteries in the transmitter.
  • Mantendu sistema bero-iturrietatik eta eguzki-argitik urrun.
  • Saihestu osagaiak erortzea edo kolpe gogorren eraginpean jartzea.

Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

  • DW-11 Digital Wireless Receiver
  • LT-HM Digital Wireless Bodypack Transmitter
  • Mikrofono solapa
  • Entzungailuen Mikrofonoa
  • Hargailurako korronte-egokigailua
  • 2 AA bateria (igorgailurako)
  • Erabiltzailearen eskuliburua (dokumentu hau)

Produktua amaituview

DW-11 Digital Wireless Receiver

The receiver unit processes the digital audio signal from the transmitter and outputs it to your audio system. It features a front panel display and controls, along with rear panel audio outputs and power input.

Aurrealdea view of the Nady DW-11 Digital Wireless Receiver, showing the display, volume knob, and power button.

1. irudia: Front Panel of DW-11 Receiver. This image displays the front of the Nady DW-11 receiver, highlighting its digital display, volume control knob, and power button. Indicators for AF (Audio Frequency) and RF (Radio Frequency) are also visible.

Atzekoa view of the Nady DW-11 Digital Wireless Receiver, showing XLR and 1/4 inch outputs, and DC power input.

2. irudia: Rear Panel of DW-11 Receiver. This image shows the rear connections of the Nady DW-11 receiver, including the balanced XLR output, unbalanced 1/4" output, and the DC 12-15V power input.

LT-HM Digital Wireless Bodypack Transmitter

The bodypack transmitter is lightweight and designed for discreet wear. It connects to either the included lapel or headset microphone and transmits the audio signal wirelessly to the DW-11 receiver. It operates on two AA batteries.

  • Lapel Microphone: A small, clip-on microphone suitable for interviews, presentations, and general speech.
  • Entzungailuen mikrofonoa: Worn on the head, providing a secure fit and consistent microphone placement for active performers or presenters.

Konfigurazio Argibideak

  1. Deskonprimitu osagaiak: Kontu handiz kendu osagai guztiak ontzitik.
  2. Hartzailearen kokapena: Place the DW-11 receiver on a stable surface, away from other wireless devices or large metal objects that could interfere with the signal. Ensure the antenna is upright and unobstructed.
  3. Connect Receiver Power: Connect the provided power adapter to the DC 12-15V input on the rear of the DW-11 receiver and plug it into an AC outlet. Do not power on the receiver yet.
  4. Transmisorearen bateriak instalatu: Open the battery compartment on the LT-HM bodypack transmitter. Insert two fresh AA batteries, observing the correct polarity (+/-). Close the compartment securely.
  5. Konektatu mikrofonoa transmisoreari: Plug either the lapel or headset microphone into the input jack on the LT-HM bodypack transmitter. Ensure the connection is firm.
  6. Konektatu hargailua audio sistemara:
    • For balanced connections, use an XLR cable to connect the "BAL MIC OUT" on the receiver to an XLR input on your mixer or audio interface.
    • For unbalanced connections, use a 1/4" TS cable to connect the "UNBAL LINE SUM OUT" on the receiver to a 1/4" input on your mixer or ampbiziagoa.

Funtzionamendu-argibideak

  1. Piztu hargailua: Press the "POWER" button on the front panel of the DW-11 receiver. The display should illuminate.
  2. Piztu transmisorea: Press and hold the power button on the LT-HM bodypack transmitter until its indicator light illuminates.
  3. Maiztasun sinkronizazioa: The Nady DW-11 system operates on a fixed frequency (902-951MHz band). The receiver and transmitter are pre-set to communicate on a specific channel. Ensure both units are powered on and within range. The "RF" (Radio Frequency) indicator on the receiver should light up, indicating a successful connection.
  4. Doitu bolumena: Use the "VOL +" and "VOL -" knob on the front of the DW-11 receiver to adjust the output level. Start with a low volume and gradually increase it to a comfortable listening level on your connected audio system. The "AF" (Audio Frequency) indicator will light up when audio is being received.
  5. Mikrofonoaren erabilera:
    • Lapel Mic: Clip the lapel microphone approximately 6-8 inches below your chin, centered on your clothing.
    • Entzungailuen mikrofonoa: Position the headset microphone boom approximately 1-2 inches from the corner of your mouth.
  6. Tartea: The system offers an extended wireless range of up to 300 feet (line of sight). Performance may vary depending on environmental conditions and obstructions.
  7. Itzali: To turn off the system, first power off the transmitter, then the receiver.

Mantentzea

  • Garbiketa: Erabili zapi leun eta lehor bat hartzailearen eta igorlearen kanpoaldea garbitzeko. Ez erabili garbitzaile likidorik edo disolbatzailerik.
  • Bateria ordezkatzea: Replace the AA batteries in the transmitter when the battery indicator shows low power or when audio quality degrades. Always use fresh, high-quality batteries.
  • Biltegiratzea: When not in use for extended periods, remove batteries from the transmitter and store the system in a cool, dry place, away from extreme temperatures and humidity.

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Ez dago soinu irteerarik
  • Hartzailea ez dago piztuta.
  • Transmisorea ez dago piztuta.
  • Low or dead transmitter batteries.
  • Hartzailea ez dago audio sistemara konektatuta.
  • Volume too low on receiver or audio system.
  • Microphone not connected to transmitter.
  • Ziurtatu hartzailea konektatuta eta piztuta dagoela.
  • Ziurtatu transmisorea piztuta dagoela.
  • Ordeztu transmisorearen bateriak.
  • Check audio cable connections from receiver to audio system.
  • Increase volume on receiver and audio system.
  • Ensure microphone is securely plugged into transmitter.
Etengabeko audioa edo estatikoa
  • Eremuz kanpo.
  • Beste haririk gabeko gailuen interferentziak.
  • Igorlearen eta hartzailearen arteko oztopoak.
  • Low transmitter batteries.
  • Move transmitter closer to receiver.
  • Kokatu hartzailea interferentzia iturri potentzialetatik urrun.
  • Ziurtatu unitateen arteko ikusmen-lerro garbia dagoela.
  • Ordeztu transmisorearen bateriak.
Weak audio signal
  • Transmisorearen bateriak gutxi dira.
  • Microphone placement incorrect.
  • Hargailuaren bolumena baxuegia da.
  • Ordeztu transmisorearen bateriak.
  • Mikrofonoaren posizioa soinu-iturritik hurbilago egoitzea.
  • Igo hargailuaren bolumena.

Zehaztapenak

  • Eredua: DW-11-LT-HM
  • Maiztasun-erantzuna: 20Hz-20kHz
  • Haririk gabeko irismena: Gehienez 300 oin (ikusmen-lerroa)
  • Transmitter Battery Life: Gehienez 11 ordu (2 AA bateriarekin)
  • Hargailuaren irteerak: 1/4" Unbalanced, XLR Balanced
  • Eragiketa-maiztasuna: 902-951MHz UHF band
  • Modulazioa: QPSK digitala
  • Audio digitalaren bihurketa: 48 kHz / 24 bit
  • Elementuaren pisua: 1.94 kilo
  • Produktuaren neurriak: 14 x 14 x 3 hazbete

Bermea eta Laguntza

For warranty information or technical support, please refer to the official Nady webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.

Nady Webgunea: www.nady.com

© 2023 Nady Systems. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.