COMOMY Auto Close Baby Gate with Cat Door (Model BG-01W)

1. Sarrera

Thank you for choosing the COMOMY Auto Close Baby Gate with Cat Door. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new gate. Please read all instructions carefully before assembly and use, and retain this manual for future reference.

This gate is designed to provide a secure barrier for children and pets in various home openings, including doorways and stairs. It features an auto-close mechanism, a double-locking system, and a convenient cat door.

Image 1.1: The COMOMY Auto Close Baby Gate with Cat Door in a home setting, separating a cat and a dog.

2. Segurtasun informazioa

OHARRA: Abisu eta argibide hauek ez betetzeak lesio larriak edo heriotza eragin ditzake.

• Always install and use the gate as instructed.
• Segurtasun-hesi hau etxeko erabilerarako soilik da.
• This safety barrier is suitable for use with children from 6 to 24 months.
• Never use this gate to keep a child from accessing a swimming pool.
• Segurtasun-hesia behar bezala instalatuta eta finkatuta dagoela egiaztatu aldizka.
• Ez erabili segurtasun-hesia osagai batzuk hondatuta edo falta badira.
• The safety barrier must be fitted between rigid surfaces such as walls or door frames.
• For stairway installation, the gate MUST be hardware mounted. Contact customer support for special accessories if needed.
• Ez igo inoiz atearen gainetik.
• Do not allow children to swing on the gate.
• Keep children away from the gate during installation.
• The small pet door is designed for small pets only. Ensure children cannot pass through it.
• Always ensure the gate is securely latched after passing through.

3. Paketearen edukia

Mesedez, egiaztatu osagai guztiak daudela instalazioa hasi aurretik:

• Main Gate Frame (with pre-installed zip tie)
• Extension Pieces (5.5" and 2.8" - quantity may vary based on chosen width)
• 4x Pressure Bolts
• 4x Hormako kopak
• 4x Dry Wall Anchors (for hardware mounting)
• 4x Screws (for hardware mounting)
• 2x Y-Spindle Rods (for round/rhombic/square columns, optional)
• 1x Giltza
• Extra Retaining Ties (for re-installation if needed)

Image 3.1: Included components for the COMOMY Baby Gate.

4. Produktuaren neurriak eta ezaugarriak

4.1 Neurriak

• Atearen altuera: 30 hazbete (76 cm)
• Zabalera erregulagarria: Fits openings from 29.5 inches (75 cm) to 40.5 inches (103 cm)
• Cat Door Dimensions: Approximately 7.6 inches (19 cm) wide x 10.1 inches (25.6 cm) high

Image 4.1: Detailed dimensions of the COMOMY Baby Gate and its cat door.

4.2 Ezaugarri nagusiak

• Itxiera automatikoaren funtzioa: The gate automatically closes when opened less than 90 degrees.
• Dual-Direction Opening: Gate swings open in both directions (180 degrees).
• Egon irekita eginbidea: Gate remains open at a 90-degree angle for convenient passage.
• Double-Locking System: Provides enhanced security for children.
• Integrated Cat Door: Allows small pets to pass through while restricting larger animals or children. Includes a locking feature for the cat door.
• Eraikuntza iraunkorra: Heavy-duty steel frame designed for stability.
• Muntaketa polifazetikoa: Supports both pressure-mounted and hardware-mounted installations.

Image 4.2: The 40.5" safety gate featuring a dedicated door for small pets.

Image 4.3: The small pet door includes a locking feature for controlled access.

5. Konfigurazioa eta instalazioa

5.1 Instalatu aurretik

• Measure Your Opening: Erosketa aurretikasing and installing, accurately measure the width of your doorway or stair opening. The gate fits openings from 29.5" to 40.5". Select appropriate extension pieces if your opening is wider than the main gate frame.
• Initial Gap: It is normal to observe a gap at the handle area of the gate before installation. This is not a defect and will close once the gate is properly installed and tightened.
• DO NOT Cut the Retaining Tie: The gate comes with a retaining tie (zip tie) holding the main frame together. DO NOT cut this tie until the installation is complete and the gate is securely mounted.

Image 5.1: Measure your opening carefully to ensure proper fit and select necessary extensions.

Image 5.2: Important warning regarding the retaining tie and the normal pre-installation gap.

5.2 Pressure Mounted Installation (Doorways, Hallways)

This method requires no drilling and is suitable for most standard openings.

1. Assemble the gate frame with any necessary extension pieces by sliding them into the main gate.
2. Insert the four pressure bolts into the holes at each corner of the gate frame.
3. Jarri atea nahi duzun irekiduran. Ziurtatu beheko barra zoruarekin berdinduta dagoela eta atea erdian dagoela.
4. Begin rotating the adjustment wheels on each pressure bolt to extend them until they make contact with the wall or door frame.
5. Continue tightening the pressure bolts evenly, alternating between all four corners, until the gate is firmly secured and the gap at the handle is closed. Use the provided wrench for extra leverage if needed.
6. Once the gate is stable and secure, cut and remove the retaining tie.
7. Test the gate's stability and ensure the locking mechanism functions correctly.

5.3 Hardware Mounted Installation (Stairs)

For installation at the top or bottom of stairs, hardware mounting is required for maximum safety.

1. Follow steps 1-3 from the pressure-mounted installation.
2. Mark the positions for the wall cups on the wall or banister where the pressure bolts will rest.
3. Drill pilot holes at the marked positions. If installing into drywall, insert the dry wall anchors.
4. Secure the wall cups to the wall/banister using the provided screws.
5. Place the gate so the pressure bolts align with the installed wall cups.
6. Tighten the pressure bolts evenly until the gate is firmly secured within the wall cups and the gap at the handle is closed.
7. Once the gate is stable and secure, cut and remove the retaining tie.
8. Test the gate's stability and ensure the locking mechanism functions correctly.

Image 5.3: Visual guide for pressure-mounted installation.

5.4 Using Y-Spindle Rods (Optional)

If installing the gate against round, rhombic, or square columns (e.g., stair banisters), replace two of the standard pressure bolts with the Y-spindle rods. These rods are designed to provide a secure fit around non-flat surfaces. Follow the same tightening procedure as with standard pressure bolts.

Image 5.4: Y-Spindle Rods for various column types.

6. Funtzionamendu-argibideak

6.1 Opening the Main Gate

The gate features a double-locking system for enhanced safety. To open:

1. Press the button located on the top of the handle.
2. While holding the button, lift the gate handle slightly.
3. Pull or push the gate open in the desired direction.

Image 6.1: Easy one-hand operation of the main gate.

6.2 Auto-Close and Stay-Open Features

• Itxiera automatikoa: If the gate is opened less than 90 degrees, it will automatically swing shut and latch securely.
• Stay-Open: If the gate is opened to a full 90-degree angle, it will remain open, allowing for free passage. To close, simply push the gate gently until it swings past the 90-degree mark, and it will auto-close.

Image 6.2: Auto-close and 90-degree stay-open functionality.

6.3 Operating the Cat Door

The small cat door can be opened or closed as needed:

• To open, slide the small latch on the cat door upwards.
• To close and secure, slide the latch downwards until it clicks into place.

7. Mantentzea

Regular maintenance ensures the longevity and proper function of your gate.

• Garbiketa: Wipe the gate regularly with a damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Ikuskapena: Periodically check all parts for wear, damage, or loose connections. Ensure all pressure bolts are tight and the gate remains securely mounted.
• Lubrifikazioa: If the gate hinges become stiff, apply a small amount of silicone-based lubricant to the hinge points.
• Biltegiratzea: If storing the gate, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

8. Arazoak

• Gate does not close properly: Ensure the gate is installed squarely in the opening and the pressure bolts are tightened evenly. The gap at the handle should be minimal or closed when properly installed.
• Atea askea sentitzen da: Re-tighten all four pressure bolts evenly until the gate is secure. If hardware mounted, check that the wall cups are firmly attached.
• Gap at the handle before installation: This is normal. The gap will close as the pressure bolts are tightened during installation. Do not cut the retaining tie until installation is complete.
• Atea zaila da irekitzen/ixten: Check for any obstructions. Ensure the hinges are clean and consider applying a small amount of lubricant if needed.
• Atea ez da ondo irekitzen: Double-check your measurements against the gate's adjustable width (29.5"-40.5"). Ensure you are using the correct combination of extension pieces.

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information or technical support, please contact COMOMY customer service through the retailer where the product was purchased or visit the official COMOMY website. Please have your model number (BG-01W) and purchase date available when contacting support.