WORKPRO Cordless 3.6V Grass Shears and Hedge Trimmer

Sarrera

Eskerrik asko erosketagatik.asing the WORKPRO Cordless 3.6V Grass Shears and Hedge Trimmer. This versatile 2-in-1 tool is designed to simplify your garden maintenance tasks, offering both grass shearing and hedge trimming capabilities in a compact, lightweight, and cordless design. Please read this manual carefully before operation to ensure safe and efficient use of the product.

For optimal performance and longevity, adhere to all instructions regarding setup, operation, maintenance, and safety.

Segurtasun Informazioa

OHARRA: Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and sturdy footwear when operating this tool. Keep hands and feet away from blades. Do not operate in wet conditions or near flammable liquids or gases.

• Mantendu haurrak eta ingurukoak urrun, tresna erabiltzen duzun bitartean.
• Ensure the safety lock key is properly inserted before operation.
• Do not force the tool. Use the correct blade for the task.
• Disconnect the tool from the power source before cleaning, maintenance, or changing accessories.
• Gorde tresna leku lehor eta seguru batean, haurren eskura ez dagoen lekuan.

Produktua amaituview eta Osagaiak

Familiarize yourself with the components of your WORKPRO Grass Shears and Hedge Trimmer:

1. irudia: Produktuaren osagaiak

• Heldulekua: Ergonomikoki diseinatua helduleku erosoa lortzeko.
• Segurtasun botoia: Must be pressed simultaneously with the switch to operate.
• Aldatu: Activates the blades.
• Blade askatzeko botoia: Used to detach blades for changing.
• 180° Rotation Button: Allows the handle to rotate for different cutting angles.
• Safety Lock Key: Must be inserted into the handle end for operation.
• Belarra mozteko pala: 80mm cutting width, ideal for lawn edges and small grass areas.
• Heskai-mozgailuaren pala: 120mm cutting width, suitable for hedges and shrubs.
• Mikro USB kablea: For charging the tool's battery.

Setup and Blade Installation

Before first use, ensure the battery is fully charged (refer to the Charging section). Follow these steps to install the desired blade:

2 irudia: Konfigurazio urratsak

1. Erantsi pala: Align the chosen blade (grass shear or hedge trimmer) with the main unit and press firmly until it clicks into place. Ensure it is securely fastened.
2. Insert Safety Lock Key: Insert the safety lock key into the designated slot at the end of the handle. The tool will not operate without this key.

Funtzionamendu-argibideak

To operate your WORKPRO tool, follow these steps:

1. Activate Safety Button: With the safety lock key inserted, press and hold the safety button located on the side of the handle.
2. Aktibatu etengailua: While holding the safety button, press the main power switch (trigger) to start the blades.
3. Etengabeko funtzionamendua: Once the blades are running, you can release the safety button, and the tool will continue to operate as long as the main switch is pressed.
4. Adjust Handle Angle (Hedge Trimmer): For hedge trimming, you can rotate the handle 180 degrees by pressing the 180° rotation button and adjusting the handle to your desired angle. This allows for comfortable cutting in various positions.

Figure 3: Grass Shearing in Use

Figure 4: Hedge Trimming and Handle Rotation

Video: WORKPRO Grass Shears and Hedge Trimmer in Action

This video demonstrates the operation of the WORKPRO Grass Shears and Hedge Trimmer, including blade changes, safety features, and practical use for both grass and hedge trimming.

Bateria kargatzen

The WORKPRO tool is powered by a 3.6V rechargeable Lithium-ion battery. It features a battery level indicator lamp to show the remaining charge.

Figure 5: Charging and Power Indicator

• Kargatzeko adierazlea: Argi gorri batek bateria kargatzen ari dela adierazten du. Argi berde batek bateria guztiz kargatuta dagoela adierazten du.
• Connecting for Charge: Use the provided Micro USB cable. Connect it to the tool's charging port and plug the other end into a commercially available USB adapter (DC5V 0.5~1.0A output is recommended).
• Kargatzeko denbora: Approximately 1.5 to 3.5 hours for a full charge.
• Ohar garrantzitsua: Ensure your USB adapter provides at least 5V/1A output. Insufficient output may prevent proper charging or trigger overvoltage protection, stopping the charging process.

Mantentzea

Mantentze-lan erregularrak zure tresnaren iraupena eta errendimendu optimoa bermatzen ditu.

• Pala garbiketa: After each use, remove the blades and clean off any grass, leaves, or debris. Use a brush or cloth.
• Pala lubrifikazioa: Aldian-aldian, aplikatu makina-olio arin bat palei herdoila saihesteko eta funtzionamendu leuna bermatzeko.
• Biltegiratzea: Store the tool and blades in a dry, clean place. Ensure blades are clean and dry before storage.
• Bateria zaintzea: Do not store the tool with a completely depleted battery. Charge it periodically if not used for extended periods to maintain battery health.

Arazoak konpontzea

Zehaztapenak

6 irudia: Produktuaren neurriak eta zehaztapenak

Bermea eta Laguntza

WORKPRO products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts, please refer to the contact information provided with your product packaging or visit the official WORKPRO webgunea.

Mesedez, gorde zure erosketa-froga berme-erreklamazioetarako.