Sarrera
The Keychron K6 Pro is a 65% layout wireless custom mechanical keyboard designed for enhanced typing experience and versatility. It features QMK/VIA programmability, hot-swappable switches, and supports both Bluetooth 5.1 wireless and USB-C wired connections. This keyboard is compatible with macOS, Windows, and Linux operating systems.
Paketearen edukia
Please verify that all items are present in your Keychron K6 Pro package:
- 1x guztiz muntatutako teklatua
- 1x A motatik C motako kablea
- 1x Mac and Windows Keycaps Set
- 1x Teklak ateratzeko
- 1x Etengailu tiratzailea
- 1x Hex giltza
- 1x Screwdriver (located at the bottom of the box)
Konfigurazioa
1. Teklatua konektatzea
The K6 Pro supports both wireless Bluetooth 5.1 and wired USB-C connections.
Bluetooth konexioa:
- Ensure the keyboard's mode switch (located on the side) is set to 'Bluetooth'.
- On your device (laptop, phone, tablet), enable Bluetooth and search for 'Keychron K6 Pro'.
- Select the keyboard to pair. The keyboard can connect to up to 3 devices simultaneously. Switch between paired devices using Fn1 + Q, Fn1 + W, or Fn1 + E.
Kable bidezko konexioa:
- Ensure the keyboard's mode switch is set to 'Cable'.
- Connect the keyboard to your computer using the provided USB-C cable.
2. Sistema eragilearen aldaketa
The K6 Pro has a dedicated switch to toggle between macOS and Windows layouts. Locate the switch on the side of the keyboard and set it to your desired operating system for optimal key functionality.
3. Teklatua kargatzea
Connect the USB-C cable to the keyboard and a power source (e.g., computer USB port, wall adapter). The keyboard features a rechargeable battery. An indicator light will show charging status.
Funtzionamendua
1. Key Combinations (Fn Keys)
The K6 Pro utilizes Fn (Function) key combinations to access various features and multimedia controls. Refer to the tables below for common combinations:
Fn1 + Keys:
Fn2 + Keys:
2. QMK/VIA pertsonalizazioa
The K6 Pro is fully programmable with QMK/VIA firmware. This allows you to remap any key, create macro commands, and customize lighting effects. To use QMK/VIA:
- Konektatu teklatua ordenagailura USB-C kablearen bidez.
- Download and install the VIA software or access the VIA web aplikazioa.
- Follow the on-screen instructions to customize your keymap and macros. Note: Key remapping is performed in wired mode, but the changes apply to both wired and wireless modes.
3. Beroan alda daitezkeen etengailuak
The K6 Pro features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports most 3-pin and 5-pin MX mechanical switches.
- To remove a switch, use the provided switch puller to gently grip and pull the switch upwards.
- To install a new switch, align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure pins are not bent.
4. RGB atzeko argiaren kontrola
The keyboard features RGB backlighting. Use Fn1 + Light effect key to cycle through different backlight effects. Use Fn2 + Left/Right arrow keys to change backlight colors.
Mantentzea
1. Teklatua garbitzea
To clean your keyboard, first disconnect it from all power sources. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris from between switches.
2. Etengailuaren eta teklaren estalkien ordezkapena
As the K6 Pro is hot-swappable, you can easily replace individual switches or keycaps. Use the provided tools for safe removal and installation. Ensure proper alignment to avoid damaging pins or sockets.
Arazoak konpontzea
- Teklatua ez da Bluetooth bidez konektatzen: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again. Ensure the keyboard is charged.
- Teklak ez dute erantzuten: Check if the keyboard is in the correct operating system mode (Mac/Windows). If using wired mode, ensure the cable is securely connected. If a specific key is not working, consider hot-swapping the switch for a new one.
- Atzeko argiaren arazoak: Use the Fn key combinations to adjust brightness or cycle through effects. Ensure the keyboard is not in a low-power state.
- QMK/VIA not detecting keyboard: Ensure the keyboard is connected via USB-C cable and the mode switch is set to 'Cable'. Restart the VIA software or web aplikazioa.
Zehaztapenak
| Marka | Keychron |
| Ereduaren izena | Keychron K6 Pro |
| Modelo zenbakia | K6P-H1 |
| Konektibitate Teknologia | Bluetooth 5.1, USB-C |
| Teklatuaren diseinua | 65% (68 keys), QWERTY |
| Mechanical Switch Model | Keychron K Pro Red (Linear) |
| Bero-trukagarria | Yes (3-pin and 5-pin MX mechanical switches) |
| Atzeko argiztapena | RGB |
| Programagarritasuna | QMK/VIA enabled |
| Sistema eragile bateragarriak | macOS, Windows, Linux |
| Energia iturria | Bateria kargagarria |
| Materiala | Plastic enclosure, Steel plate |
| Ezaugarri gehigarriak | PCB-mounted screw-in stabilizers, Sound-absorbing foam, Silicone dampening bottom pad, Double-shot PBT Keycaps |
Bermea
The Keychron K6 Pro comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Keychron webwebgunean edo jarri harremanetan bezeroarentzako laguntzarekin.
Laguntza
For further assistance, technical support, or to download the latest firmware and VIA software, please visit the official Keychron webgunea. Maiz egiten diren galderak eta komunitateko foroak ere aurki ditzakezu laguntza gehigarria lortzeko.