1. Sarrera

The HQ-Power DMX 4-Channel Splitter (Model HQDB10001) is designed to distribute a single DMX512 input signal into four isolated DMX512 outputs. This device ensures reliable signal transmission over longer distances and prevents signal degradation or interference between connected DMX devices. Its compact and robust design makes it suitable for various professional lighting applications.

2. Segurtasun-argibideak

• Irakurri arretaz argibide guztiak gailua erabili aurretik.
• Gorde eskuliburu hau etorkizunean erreferentzia izateko.
• This device is intended for indoor use only. Do not expose it to rain or moisture.
• Ziurtatu elikadura hornidura boltage gailuan zehaztutako eskakizunekin bat dator.
• Always disconnect the device from the power outlet before cleaning or servicing.
• Ez erabili gailua kable elektrikoa hondatuta badago.
• Saihestu gailua bero-iturrietatik gertu edo eguzki-argia zuzenean jartzen.
• Ez saiatu gailua zeuk konpontzen edo aldatzen. Mantendu konponketa guztiak langile kualifikatuen esku.
• Ziurtatu aireztapen egokia unitatearen inguruan, gehiegi berotzea saihesteko.

3. Produktua amaitu daview

Familiarize yourself with the various components and connections of your HQ-Power DMX 4-Channel Splitter.

3.1 Front Panel: DMX Signal Outputs

• DMX Signal Output (1-4): Four isolated 3-pin XLR outputs for connecting DMX-controlled lighting fixtures.
• LED adierazleak: Green LEDs next to each output illuminate when a DMX signal is present on that channel.

3.2 Rear Panel: Power and DMX Input/Thru

• Potentzia sarrera: Standard IEC power connector for connecting the included power cable.
• DMX sarrera: 3-pin XLR connector for receiving the DMX512 signal from a DMX controller.
• DMX Thru Output: 3-pin XLR connector for passing the DMX input signal directly to another DMX device or splitter.
• Terminal Switch (120R): A switch to activate or deactivate the 120 Ohm DMX termination resistor.

4. Konfigurazioa

1. Despaketatzea: Carefully remove the DMX splitter from its packaging. Inspect the device for any signs of damage during transit.
2. Potentzia-konexioa: Connect the provided power cable to the IEC power input on the rear panel of the splitter and then to a suitable AC power outlet (100-240V~, 50/60Hz).
3. DMX Input Connection: Connect your DMX controller's output to the DMX sarrera (3-pin XLR) on the rear panel of the splitter.
4. DMX Output Connections: Connect your DMX-controlled lighting fixtures to the DMX seinalearen irteera ports (1-4) on the front panel using standard 3-pin XLR DMX cables.
5. DMX Thru (Optional): If you need to daisy-chain the DMX signal to another DMX device or splitter, connect a DMX cable from the DMX Thru Output on the rear panel to the input of the next device.
6. Amaiera:
   • For the last device in a DMX chain, it is recommended to terminate the DMX signal with a 120 Ohm resistor to prevent signal reflections.
   • If this DMX splitter is the last device in your DMX chain (i.e., nothing is connected to the DMX Thru output and no other DMX devices are connected after the splitter's outputs), set the Terminal Switch (120R) on the rear panel to the 'ON' position.
   • If other DMX devices are connected after the splitter (via Thru or its outputs), ensure the termination is applied at the very end of the entire DMX chain, not necessarily on the splitter itself.

5. Funtzionamendua

Once all connections are made and the device is powered on, the HQ-Power DMX 4-Channel Splitter operates automatically.

• Piztu: Plug the power cable into a wall socket. The power indicator (if present, usually a small LED near the power input) will illuminate.
• Seinalearen banaketa: The DMX signal received at the DMX Input will be amplified and distributed to all four DMX Signal Outputs.
• Irteera adierazleak: The green LEDs next to each DMX output port will flash or illuminate steadily when a valid DMX signal is being transmitted through that output. This indicates proper signal flow.
• Isolatze: Each output is electrically isolated, meaning a fault on one output line will not affect the other outputs or the DMX input.

6. Mantentzea

• Garbiketa: Disconnect the device from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Biltegiratzea: When not in use for extended periods, store the device in a dry, dust-free environment, preferably in its original packaging.
• Ikuskapena: Periodically check all cables and connectors for wear or damage. Replace any damaged components immediately.

7. Arazoak

If troubleshooting steps do not resolve the issue, contact HQ-Power customer support or a qualified technician.

8. Zehaztapenak

9. Bermea eta Laguntza

Warranty information for the HQ-Power DMX 4-Channel Splitter (Model HQDB10001) is typically provided with your purchase documentation or on the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please visit the official HQ-Power webgunera edo jarri harremanetan tokiko saltzailearekin.