Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch User Manual

1. Sarrera

This manual provides essential information for the installation, operation, and maintenance of your Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Segurtasun informazioa

Jarraitu segurtasun neurri hauek gailuari kalterik edo langileei lesiorik ez eragiteko:

• Ziurtatu lurrera behar bezala konektatuta dagoela korrontea konektatu aurretik.
• Do not operate the device in environments exceeding 40 degrees Celsius.
• Erabili zehaztutako korronte-egokitzailea eta kableak soilik.
• Saihestu aireztapen-zuloak blokeatzea gehiegi berotzeko.
• Ez saiatu gailua zeuk irekitzen edo konpontzen. Mantendu konponketa guztiak langile kualifikatuen esku.

3. Paketearen edukia

Egiaztatu zure paketeak elementu hauek dituela:

• Hewlett Packard Enterprise Aruba 6000 Switch (Model R8N89A)
• Elikatze kablea
• Rack muntatzeko kita (aplikagarria bada)
• Dokumentazioa (Hasierako Gida Azkarra, Segurtasun Informazioa)

4. Produktua amaitu daview

4.1 Aurreko panelaren diseinua

The front panel of the Aruba 6000 switch provides various ports and LED indicators for network connectivity and status monitoring.

Image: Front panel of the HPE Aruba 6000 switch, showing various ports and LED indicators.

Aurrealdeko panelaren osagaiak:

• PoE1 Indicator: Indicates Power over Ethernet status for the device.
• R8N89A Label: Product model number and electrical specifications (57Vmax | 0.3A).
• 2p 1G SFP Ports (15, 16): Two 1 Gigabit Small Form-Factor Pluggable ports for fiber optic connections.
• 2p 1G BASE-T Ports (13, 14): Two 1 Gigabit Ethernet ports for copper connections.
• 12p 1G BASE-T Ports (1A-12): Twelve 1 Gigabit Ethernet ports for copper connections.
• UID (Unit Identification) LED: Helps locate the switch in a rack.
• Spd (Speed) LED: Indicates port speed status.
• PoE (Power over Ethernet) LED: Indicates PoE status for individual ports.
• Aux Port: Auxiliary USB port.
• LED Mode Button: Toggles LED display modes.
• Kontsolaren ataka: USB-C console port for local management.
• Berrezarri botoia: Resets the device to factory defaults or reboots.

4.2 LED adierazleak

The front panel LEDs provide visual status of the switch's operation:

• Spd LED:
  • Flashing: Not maximum speed.
  • Solid: Maximum speed.
• PoE LED:
  • Flashing: Fault/Over budget.
  • Solid: PoE enabled.

5. Konfigurazioa

5.1 Instalazio fisikoa

1. Rack muntatzea: Secure the switch in a standard 19-inch equipment rack using the provided rack mount kit. Ensure adequate space for airflow around the device.
2. Potentzia-konexioa: Connect the power cord to the switch's power inlet and then to a grounded AC power outlet.
3. Sare-konexioak: Connect network cables (Ethernet or fiber) to the appropriate ports on the front panel.

5.2 Hasierako konfigurazioa

1. Kontsolarako sarbidea: Connect a computer to the switch's console port using a USB-C cable. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
2. Saioa hasi: Follow the on-screen prompts to log in. Default credentials are typically provided in the Quick Start Guide.
3. Oinarrizko konfigurazioa: Configure essential network parameters such as IP address, subnet mask, and default gateway.

6. Funtzionamendu-argibideak

Once the switch is physically installed and initially configured, it will begin forwarding network traffic. For advanced configurations and management, refer to the comprehensive software configuration guide available on the Hewlett Packard Enterprise support webgunea.

• PoE Functionality: The switch automatically detects and powers PoE-compatible devices connected to its PoE-enabled ports. Monitor PoE status via the front panel LEDs.
• Layer 3 Features: As a Managed L3 switch, it supports advanced routing and network segmentation features. These are configured via the command-line interface (CLI) or weboinarritutako kudeaketa interfazea.

7. Mantentzea

• Garbiketa: Periodically clean the exterior of the switch with a soft, dry cloth. Ensure ventilation openings are free from dust and debris.
• Firmware eguneraketak: Regularly check the Hewlett Packard Enterprise support website for firmware updates. Keeping the firmware current ensures optimal performance and security.
• Konfigurazioaren babeskopia: Regularly back up your switch configuration to an external storage device or network location.

8. Arazoak

If you encounter issues with your switch, consider the following troubleshooting steps:

• Potentziarik gabe: Verify the power cord is securely connected and the power outlet is functional. Check the power LED on the switch.
• Sare konexiorik ez: Check cable connections, port LEDs (Spd and PoE), and ensure correct network configuration.
• PoE gailua ez da pizten: Verify the device is PoE-compatible. Check the PoE LED for faults or over-budget conditions. Ensure the switch's PoE budget is not exceeded.
• Errendimendu motela: Check for network congestion, cable quality, and port speed settings. Refer to the Spd LED.
• Fabrikaren berrezarpena: If all else fails, press and hold the Reset button for a specified duration (refer to the Quick Start Guide for exact timing) to restore factory default settings. This will erase all configurations.

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information, technical support, and additional resources, please visit the official Hewlett Packard Enterprise support website or contact their customer service. Keep your purchase receipt and product serial number handy for any support inquiries.

Hewlett Packard Enterprise Support: www.hpe.com/us/eu/support.html