1. Sarrera
This manual provides essential information for the safe and efficient operation of your ANZZI Envo Electric Tankless Water Heater, Model WH-AZ027-M3. Please read all instructions carefully before installation and use. Retain this manual for future reference.
Produktua amaituview
The ANZZI Envo Electric Tankless Water Heater is designed to provide on-demand hot water, eliminating the need for a traditional storage tank. Its compact design allows for installation in various locations, saving valuable space.
1. irudia: Aurrealdea view of the ANZZI Envo Electric Tankless Water Heater, showing the digital display and control buttons.
Ezaugarri nagusiak
- Tankarik gabeko diseinua: Saves space and provides continuous hot water.
- Uraren/elektrizitatearen bereizketa: Ensures safety by isolating the flowing water from the electrical system.
- LED pantaila: Provides real-time temperature readings and allows for easy temperature adjustment.
- Berotzearen babesa: Integrated safety feature to prevent overheating.
- Tamaina trinkoa: Dimensions of 10.24"W x 15.16"H allow for flexible installation.
Figure 2: Visual comparison illustrating the compact size of the ANZZI Envo tankless water heater compared to a traditional tank water heater, highlighting its space-saving benefit.
2. Segurtasun informazioa
OHARRA: Instalazio, doikuntza, aldaketa, zerbitzu edo mantentze-lan desegokiak kalte materialak, lesioak edo heriotza eragin ditzake. Irakurri arretaz argibide hauek ekipamendu hau instalatu edo konpondu aurretik.
- This appliance must be installed by a qualified electrician and plumber in accordance with all national and local electrical and plumbing codes.
- Ensure the main power supply is disconnected before performing any installation or maintenance.
- Do not operate this water heater if any part of it has been submerged in water.
- Do not block or obstruct the flow of water into or out of the unit.
- Maintain proper clearances around the unit as specified in the installation section.
- The water heater is designed for indoor use only.
- Erabili aurretik, egiaztatu beti uraren tenperatura erredurak saihesteko.
3. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | ANZZI |
| Modelo zenbakia | WH-AZ027-M3 |
| Wattage | 27000 watts (27 kW) |
| liburukiatage | 240 Volt |
| Produktuaren neurriak | 10.24"Z x 15.16"A |
| Elementuaren pisua | 18.19 kilo |
| Ezaugarri bereziak | LED Display, Overheat Protection |
| Muntatze Mota | Horma |
| Eraginkortasuna | Oso eraginkorra |
| Ziurtagiria | ETL |
| UPC | 191042063433 |
Figure 3: Dimensions of the ANZZI Envo Electric Tankless Water Heater, showing a width of 10.2 inches and a height of 15.1 inches.
4. Instalazioa
Installation of this tankless water heater requires professional expertise. It is strongly recommended that a licensed electrician and plumber perform the installation to ensure compliance with all applicable codes and safety standards.
4.1 Baldintza elektrikoak
The ANZZI Envo 27kW model requires significant electrical capacity. Ensure your electrical panel can support the unit's demands.
- liburukiatage: 240 Volt
- Gehienezko korronte-sorta: 112.5 Amps
- Required Breakers: 3 x 40 Amp Bi poloko etengailuak
- Required Wire (AWG): 3x8 AWG
- Minimum Panel Capacity: 200 Amps or more is recommended.
Figure 4: Diagram detailing the electrical requirements for the ANZZI Envo 27kW model, including breaker and wire specifications. Professional installation is recommended.
4.2 Plumbing Requirements
- Install the unit vertically with water connections at the bottom.
- Ensure proper water pressure and flow rate are available at the installation site.
- The unit features water/electric separation for enhanced safety.
- All fittings are designed with O-rings to minimize potential leaks.
5. Irudia: Behea view of the ANZZI Envo water heater, illustrating the inlet and outlet water connections.
6. irudia: Adibample installation diagram showing the ANZZI Envo water heater mounted on a wall in a utility area, serving a bathroom above.
4.3 Sizing and Capacity
The performance of a tankless water heater is dependent on the incoming water temperature and desired flow rate. Refer to the chart below to determine the appropriate model for your climate and usage needs.
Figure 7: Sizing chart for ANZZI Envo tankless water heaters, correlating regional inlet water temperatures with flow rates (GPM) and approximate fixture usage for different models.
The 27kW model is suitable for higher demand applications, but actual performance will vary based on your specific inlet water temperature and simultaneous hot water usage.
5. Konfigurazio eta funtzionamendu argibideak
5.1 Hasierako konfigurazioa
- After plumbing and electrical connections are complete and verified by a professional, ensure all water valves are open.
- Purge air from the system by opening all hot water faucets in your home until water flows smoothly without sputtering.
- Piztu unitatearen energia elektrikoa zirkuitu-hauslean.
- The unit's LED display should illuminate.
5.2 Operating the Unit
The ANZZI Envo features an intuitive LED display for temperature control.
- Pizteko botoia: Sakatu pizteko botoia (⏻) unitatea pizteko edo itzaltzeko.
- Tenperaturaren doikuntza: Erabili gora (▲) eta behera (▼) arrow buttons to set your desired water temperature. The display will show the set temperature.
- Denbora errealeko bistaratzea: The LED screen will show the current water temperature as it heats.
Figure 8: Close-up of the ANZZI Envo control panel, showing the digital temperature display and adjustment buttons.
The unit provides instant and continuous hot water as long as the flow rate and inlet temperature are within its operational capacity.
Figure 9: Illustration of how cold water enters the unit and is instantly heated, then exits as continuous hot water, demonstrating the tankless operation.
6. Mantentzea
Regular maintenance helps ensure the longevity and efficient operation of your tankless water heater.
- Urteko garbiketa: It is recommended to flush the unit annually to remove mineral buildup, especially in areas with hard water. Consult a qualified plumber for this service.
- Ikuskatu konexioak: Periodically check all water and electrical connections for any signs of leaks or corrosion. Address any issues promptly.
- Garbitu kanpoaldea: Garbitu unitatearen kanpoaldea leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Iragazkiaren garbiketa (hala badagokio): Some models may have an inlet filter. Refer to specific instructions for cleaning or replacing it if present.
7. Arazoak
Before attempting any troubleshooting, ensure the power supply to the unit is disconnected at the circuit breaker.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ez dago ur berorik / Unitatea ez da pizten | No power, tripped breaker, insufficient water flow. | Check circuit breakers. Ensure adequate water flow (minimum activation flow rate). Verify electrical connections. |
| Ura ez da nahikoa beroa | Inlet water too cold, flow rate too high, temperature setting too low, mineral buildup. | Reduce water flow. Increase temperature setting. Consider professional descaling if mineral buildup is suspected. Refer to sizing chart (Figure 7). |
| Uraren tenperatura aldakorra | Inconsistent water pressure, air in the system, multiple hot water demands. | Check water pressure. Purge air from the system. Avoid excessive simultaneous hot water usage. |
| Isuria | Loose connections, damaged O-rings, internal component failure. | Immediately turn off water supply and power. Tighten connections. Contact a qualified plumber for repair. |
For issues not resolved by the above steps, or for any complex repairs, contact a qualified technician or ANZZI customer support.
8. Bermea eta Laguntza
Bermearen informazioa
ANZZI Envo ur-berogailu elektriko tanklessak honako hauekin dator: Bizi osorako berme mugatua. This warranty covers defects in materials and workmanship under normal use and service. Please refer to the warranty card included with your product for full terms and conditions, or visit the ANZZI webxehetasunak lortzeko gunea.
Bezeroarentzako Arreta
For technical assistance, parts, or warranty claims, please contact ANZZI customer support. Have your model number (WH-AZ027-M3) and purchase date available when contacting support.
Contact information for ANZZI can typically be found on their official webgunean edo produktuaren ontzian.