Tempur-Pedic TP7000 Mesh Back Fabric Task Chair Instruction Manual

1. Sarrera

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your Tempur-Pedic TP7000 Mesh Back Fabric Task Chair. Please read all instructions carefully before use and retain this manual for future reference.

2. Segurtasun informazioa

• Gehienezko pisu-gaitasuna: This chair is designed to support a maximum weight of 250 pounds (113 kg). Exceeding this limit may cause damage to the chair or personal injury.
• Aurreikusitako erabilera: This chair is intended for office and task use. Do not use it for purposes other than its intended design.
• Muntaia: Ensure all components are securely fastened before using the chair. Periodically check all bolts and screws for tightness.
• Egonkortasuna: Avoid standing on the chair or using it as a step stool. Do not lean excessively to one side or the back, as this may cause the chair to tip over.
• Haurrak: Keep children away from the chair during assembly. Do not allow children to play on or around the chair.

3. Paketearen edukia

Muntaketa hasi aurretik, egiaztatu pieza guztiak daudela eta kalterik gabe daudela. Pieza bat falta bada edo kaltetuta badago, ez jarraitu muntaketarekin. Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin laguntza jasotzeko.

• Aulkiaren bizkarraldea (sarea)
• Chair Seat (Fabric with Tempur Material)
• Beso-euskarriak (2)
• Aulkiaren oinarria (5 izarretakoa gurpilekin)
• Gas Igogailuaren Zilindroa
• Mekanismo Plaka
• Hardware paketea (torlojuak, arandelak, Allen giltza)

4. Konfigurazioa eta Muntaketa

Follow these steps to assemble your Tempur-Pedic TP7000 Task Chair. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.

1. Gurpilak oinarrira lotu: Sartu bost gurpilak aulkiaren oinarriaren hanka bakoitzaren muturretan dauden zuloetan. Sakatu ondo klik egin arte.
2. Txertatu gas-igogailua: Jarri gas-igogailuaren zilindroa muntatutako aulkiaren oinarriaren erdiko zuloan.
3. Lotu mekanismo-plaka eserlekuari: Align the mechanism plate with the pre-drilled holes on the underside of the chair seat. Secure it using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. Lotu beso-euskarriak eserlekuari: Attach the armrests to the sides of the chair seat using the designated screws. Do not fully tighten yet.
5. Attach Backrest to Seat/Mechanism: Align the backrest with the mounting points on the mechanism plate or seat. Secure with screws. Once the backrest is attached, fully tighten all armrest screws.
6. Konektatu eserlekuaren multzoa gas-igogailura: Kontu handiz jarri muntatutako eserlekua eta bizkarraldea gas-igogailuaren zilindroaren gainean, gas-igogailuaren mutur konikoa mekanismoaren plakan ondo sartzen dela ziurtatuz.

5. Erabilera-argibideak (doikuntzak)

Your Tempur-Pedic TP7000 chair offers several adjustments to customize your seating experience for optimal comfort and support.

• Eserlekuaren altuera doitzea: To raise the seat, lift the lever located under the right side of the seat while taking your weight off the chair. To lower the seat, lift the lever while seated. Release the lever at the desired height.
• Beso-euskarriaren altuera doitzea: Press the button on the side of each armrest and move the armrest up or down to your preferred height. Release the button to lock it in place.
• Tilt Lock/Unlock: The chair features a single reclining position. To allow the chair to recline, pull the lever (usually the same as the height adjustment lever, or a separate one) outwards. To lock the chair in an upright position, push the lever inwards.
• Inklinazio-tentsioaren doikuntza: Rotate the round knob located under the front of the seat to adjust the tension of the recline. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

6. Mantentzea

Zaintza egokiak zure aulkiaren bizitza eta itxura luzatuko ditu.

• Garbiketa: The fabric seat and mesh back should be spot cleaned only. Use a mild detergent and a damp cloth. Do not saturate the fabric. Test any cleaning solution on an inconspicuous area first.
• Ikuskapena: Periodically inspect all bolts, screws, and connections to ensure they are tight. Retighten as necessary.
• Gurpilak: Mugimendu leuna bermatzeko, mantendu gurpilak ile eta hondakinik gabe.
• Saihestu produktu kimiko gogorrak: Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the chair's materials.

7. Arazoak

Aulkiarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

• Aulkia hondoratzen da edo ez da zutik mantentzen:
  Irtenbidea: The gas lift cylinder may be faulty. Contact customer support for a replacement.
• Aulkiaren kirrinka:
  Irtenbidea: Check all screws and bolts and tighten them. A small amount of silicone lubricant can be applied to moving parts if the squeaking persists.
• Gurpilak ez dira leunki biratzen:
  Irtenbidea: Kendu gurpilen inguruan bildutako ilea edo hondakinak. Garbitu gurpilak eskuila batekin.amp oihal.
• Aulkia ez da etzantzen:
  Irtenbidea: Ensure the tilt lock lever is disengaged (pulled outwards). Adjust the tilt tension knob counter-clockwise to reduce tension.

8. Zehaztapenak

9. Bermea eta Laguntza

Your Tempur-Pedic TP7000 Mesh Back Fabric Task Chair is backed by a Bizi osorako berme mugatua. This warranty covers defects in materials and workmanship under normal use. Specific terms and conditions apply.

For warranty claims, technical support, or to order replacement parts, please contact Tempur-Pedic customer service. Refer to your purchase documentation or the official Tempur-Pedic webgunea kontaktu-informazio eguneratuena lortzeko.

When contacting support, please have your model number (TP7000) and proof of purchase readily available.