OCEANIC 1500W Electric Oil-Filled Radiator Heater

1. Segurtasun-argibide garrantzitsuak

Please read all safety warnings and instructions carefully before using this appliance to prevent fire, electric shock, injury, or property damage. Keep this manual for future reference.

• Always plug the heater directly into a wall outlet. Never use with an extension cord or relocatable power tap.
• Ez erabili berogailurik kablea edo entxufea hondatuta badago, edo berogailua gaizki funtzionatzen badu, erori edo edozein modutan kaltetu bada.
• Ez erabili kanpoan. Berogailu hau barrualdean erabiltzeko soilik da.
• Mantendu material sukoiak, hala nola altzariak, burkoak, oheko arropa, paperak, arropa eta gortinak, berogailuaren aurrealdetik gutxienez 0.9 m-ra eta alboetatik eta atzealdetik urrun.
• Kontuz ibili behar da berogailuren bat umeek edo baliogabetuek erabiltzen dutenean edo ondoan erabiltzen dutenean eta berogailua arretarik gabe funtzionatzen uzten duten bakoitzean.
• Berogailua deskonektatzeko, itzali kontrolak eta kendu entxufea entxufetik.
• Ez sartu edo utzi objektu arrotzrik aireztapen edo ihes-zuloren batean sartzen, deskarga elektrikoa edo sutea eragin dezakeelako, edo berogailua kaltetu.
• This heater includes an anti-tip safety switch and an overheating protection system. If the heater tips over or overheats, it will automatically shut off.

2. Paketearen edukia

Egiaztatu osagai guztiak daudela eta egoera onean daudela paketea desontziratzean.

• OCEANIC 1500W Electric Oil-Filled Radiator Heater (Main Unit)
• Urruneko Kontrola
• Wheel Assemblies (2 sets)
• Argibide eskuliburua

3. Konfigurazioa

3.1 Gurpilak lotzea

1. Carefully turn the heater upside down on a soft, non-abrasive surface to avoid scratching.
2. Locate the two U-shaped bolts and four wing nuts provided.
3. Align the wheel assemblies with the mounting holes at the bottom of the heater.
4. Insert the U-shaped bolts through the mounting holes and secure them with the wing nuts. Ensure they are tightened firmly.
5. Berogailua zutik jarri berriro.

Aldea view of the heater, illustrating the proper attachment of the wheel assemblies for mobility.

3.2 Kokatze-jarraibideak

Place the heater on a firm, level surface. Ensure there is adequate clearance from walls, furniture, and other objects (minimum 3 feet / 0.9 meters). Do not place the heater directly below a power outlet.

Example of the heater placed in a living space, demonstrating appropriate clearance from furniture and walls.

4. Funtzionamendu-argibideak

4.1 Kontrol-panela amaituview

Xehetasuna view of the heater's LED display and control buttons, including power, mode, timer, and temperature adjustments.

• Pizteko botoia: Berogailua piztu/itzali egiten du.
• Modu botoia: Cycles through heating power settings (600W, 900W, 1500W).
• Tenperatura botoiak (+/-): Nahi den tenperatura doitzen du.
• Tenporizadorearen botoia: Sets the operating timer (up to 24 hours).
• LED pantaila: Shows current temperature, timer settings, and power mode.

4.2 Piztu/Itzaltzea

1. Plug the heater into a suitable 220-240V AC power outlet.
2. Press the Power Button on the control panel or remote control to turn the heater ON. The LED display will illuminate.
3. To turn OFF, press the Power Button again.

4.3 Setting Temperature and Power

1. Once ON, use the + or - buttons to set your desired temperature. The heater will automatically maintain this temperature.
2. Sakatu Modua button to cycle through the three heating power settings: Low (600W), Medium (900W), and High (1500W). Select the appropriate power for your heating needs.

4.4 Tenporizadore funtzioa erabiltzea

1. Sakatu Tenporizadorea button. The display will show '00'.
2. Erabili + or - botoiak nahi den funtzionamendu-iraupena ezartzeko, 1etik 24 ordura.
3. Berogailua automatikoki itzaliko da ezarritako denbora igaro ondoren.

4.5 Urruneko kontrolaren funtzionamendua

The included remote control duplicates the functions of the main control panel, allowing convenient operation from a distance. Ensure the remote has working batteries (not included) and is pointed towards the heater's receiver.

5. Mantentzea

5.1 Garbiketa

• Deskonektatu beti berogailua eta utzi guztiz hozten garbitu aurretik.
• Garbitu kanpoko gainazalak leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Ez murgildu berogailua uretan eta ez utzi ura barrualdera tantaka erortzen.

5.2 Biltegiratzea

When not in use, store the heater in a cool, dry place. It is recommended to use the integrated cable winder to neatly store the power cord.

6. Arazoak

7. Zehaztapenak

8. Bermea eta Laguntza

This OCEANIC product is covered by a manufacturer's warranty. For specific warranty terms, duration, and to register your product, please refer to the warranty card included in your package or visit the official OCEANIC website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact OCEANIC customer service through their official channels.

Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.