1. Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your NICOR DGC43120SRDWH 4-inch selectable canless adjustable gimbal LED recessed downlight. Please read these instructions carefully before beginning installation and retain them for future reference.
Image 1: NICOR DGC43120SRDWH 4-inch LED Recessed Downlight. This image shows the complete downlight unit with its white finish and adjustable gimbal.
2. Segurtasun informazioa
OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu fusible edo etengailu elektrikotik instalazioa edo mantentze-lanak egin aurretik.
- Konexio elektriko guztiak tokiko eta Estatuko Kode Elektrikoko (NEC) arauen araberakoak izan behar dira.
- Consult a qualified electrician if you are unsure about proper installation.
- Ez instalatu gailuaren funtzionamendu-tenperatura nominala baino handiagoa den lekuetan.
- Ziurtatu aparatua behar bezala lurrarekin lotuta dagoela.
- This product is suitable for indoor use only. Not water resistant.
- Potentzia gorakada posiblea izan daitekeen instalazioetarako, NICOR-ek gomendatzen du banaketa-panel elektrikoan gainbalio-babes gehigarria instalatzea.
3. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- Selectable LED Downlight (DGC43120SRDWH)
- Plenum-rated cable
- Off-board driver / Remote Junction Box
4. Ezaugarriak
The NICOR DGC43120SRDWH downlight offers advanced features for versatile lighting:
- Canless Design: Installs directly into the ceiling; no traditional recessed housing or junction box is required.
- Adjustable Directional Lighting: Features 25° tilt and 360° rotation for precise light direction.
- Selectable Color Temperature (CCT): Aukeratu 5 kolore-tenperatura hauetako bat (2700K, 3000K, 3500K, 4000K, 5000K) konexio-kutxako etengailu bat erabiliz.
- Errendimendu handia: Produces over 715 Lumens at 9-Watts (equivalent to a 65W incandescent bulb) with an impressive 97 CRI (Color Rendering Index) and R9 value over 70.
- Erregulagarria: Fully dimmable to less than 5% using standard TRIAC LED Dimmers.
- Low-Profile: Designed for installation into ceilings up to 1-inch thick.
- Eraikuntza iraunkorra: Fully enclosed aluminum housing protects electrical components and provides a wet location rating.
Image 2: Key specifications and selectable color temperature feature of the downlight.
Image 3: Illustration of the 25° tilt and 360° rotation capabilities of the gimbal.
Image 4: Visual representation of the 33° beam angle, showing focused illumination.
5 irudia: Albokoa view pro baxua erakustenfile design, suitable for thin ceilings.
6 irudia: Goitik behera view of the fully enclosed aluminum housing, highlighting its protective features.
5. Konfigurazioa eta instalazioa
Beharrezko tresnak: Hole saw, measuring tape, pencil, wire strippers, screwdriver.
- Itzali energia: Before starting any electrical work, ensure the power is turned off at the circuit breaker or fuse box to prevent electric shock.
- Mark and Cut Hole: Use the provided 3.75-inch template (or measure 3.75 inches) to mark the desired location on the ceiling. Use a hole saw to cut the opening.
- Konektatu kableatzea: Open the remote junction box. Connect the building's electrical wires (hot, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
- Hautatu Kolore Tenperatura: Before closing the junction box, use the switch located inside to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
- Lotura-kutxa segurua: Close the junction box and place it above the ceiling, ensuring it is securely positioned and not resting on the downlight.
- Konektatu beheko argia konexio-kutxara: Connect the plenum-rated cable from the downlight to the remote junction box. Ensure the connection is firm.
- Beheko argia instalatu: Push the spring-loaded retention clips on the downlight upwards and insert the downlight into the ceiling opening. Release the clips to secure the fixture against the ceiling.
- Berrezarri boterea: Once the downlight is securely installed, restore power at the circuit breaker.
Image 7: Diagram showing the remote junction box and spring-loaded retention clips for canless installation.
Image 8: Simplified installation diagram illustrating the connection between the downlight and the driver above the ceiling.
6. Funtzionamendu-argibideak
After successful installation, operate your downlight as follows:
- Piztu/Itzali: Erabili zure ohiko hormako etengailua argia pizteko edo itzaltzeko.
- dimming: If connected to a compatible TRIAC LED dimmer, adjust the dimmer switch to control the light intensity.
- Adjusting Gimbal: Gently tilt the inner light module up to 25° in any direction or rotate it 360° to direct the light beam as desired.
- Kolore-tenperatura aldatzea: To change the color temperature, you must first turn off power at the circuit breaker. Then, carefully remove the downlight from the ceiling to access the remote junction box. Open the junction box and adjust the CCT selection switch to your preferred setting. Reinstall the downlight and restore power.
Image 9: Close-up of the selectable color temperature switch located within the remote junction box.
7. Mantentzea
The NICOR DGC43120SRDWH LED downlight requires minimal maintenance.
- Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Garbitu aparatua zapi leun, lehor edo apur bat lehor batekin.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- Bonbillaren ordezkoa: LED argi-iturria integratuta dago eta ezin du erabiltzaileak ordezkatu. LEDa huts egiten badu, argi-tresna osoa ordezkatu beharko litzateke.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | Lanabeserako botererik ez. Kableatu konexio soltea. Aparailu akastuna. | Egiaztatu zirkuitu-hauslea eta hormako etengailua. Egiaztatu kable-konexio guztiak ondo finkatuta daudela (energia itzalita dagoela). Contact customer support if wiring is correct and power is present. |
| Argia desegoki keinuka edo ahuldu egiten da. | Argi-erregulatzaile bateraezina. Kableatu solteak. Potentzia gorakada. | Ensure dimmer is a compatible TRIAC LED dimmer. Egiaztatu kableatu-konexioak (energia itzalita dagoela). Consider installing surge protection. |
| Kolore-tenperatura okerra. | CCT etengailua gaizki ezarrita. | Turn off power, access junction box, and adjust CCT switch. |
9. Zehaztapenak
| Atributua | Balioa |
|---|---|
| Marka | Nicor |
| Modelo zenbakia | DGC43120SRDWH |
| Fixture Mota | Kanolarik gabeko Downlight |
| Tamaina | 4 hazbete |
| Kolorea | Zuria |
| Materiala | Aluminioa, Plastikoa |
| Argi iturria | LED |
| Wattage | 8.7 watt |
| Distira | 805 Lumen (over 715 Lumens stated in features) |
| liburukiatage | 120 Volt |
| Argi kolorea (CCT) | 2700K - 5000K (Selectable) |
| CRI | 97 (R9 value over 70) |
| Beam Angelua | 33° |
| Inklinazioa doitzea | 25° |
| Biraketa doitzea | 360° |
| Iluntzea | Dimmable to less than 5% (TRIAC LED Dimmers) |
| Instalazio mota | Flush Mount, Canless |
| Barruko/Kanpoko erabilera | Barruan |
| Uraren Erresistentzia Maila | Not Water Resistant (Wet location rated for housing) |
| Elementuaren pisua | 1 kilo |
| UPC | 767706195767 |
Image 10: Dimensional drawing showing the measurements of the downlight and its remote junction box.
10. Bermearen informazioa
This NICOR DGC43120SRDWH downlight is protected by NICOR’s 5-Year Limited System Warranty.
Ohar garrantzitsuak:
- Potentzia gorakada posiblea izan daitekeen instalazioetarako, NICOR-ek gomendatzen du banaketa-panel elektrikoan gainbalio-babes gehigarria instalatzea.
- Bermeak ez du estaltzen produktuaren porrota gainbolt baten ondorioztage gertaera (tentsio-igoera).
11. Laguntza eta Kontaktua
If you have any questions, require technical assistance, or need to report an issue with your NICOR DGC43120SRDWH downlight, please contact NICOR customer support. Refer to the product packaging or the official NICOR webgunea kontaktu-informazio eguneratuena lortzeko.