GreenYi AHD Monitor Camera System User Manual

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GreenYi AHD Monitor Camera System. This system includes a 5-inch AHD TFT LCD monitor and a universal 720P camera, designed to enhance vehicle safety by providing clear visual assistance for rear, front, or side views. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Segurtasun informazioa

Observe the following safety precautions to prevent damage to the product and ensure safe operation:

• Ensure all power connections are secure and correctly polarized to avoid electrical shorts.
• Disconnect the vehicle's battery before performing any wiring to prevent electrical hazards.
• Ez oztopatu gidariaren view or interfere with vehicle controls during installation.
• Avoid installing the monitor or camera in locations exposed to extreme temperatures or direct sunlight for prolonged periods.
• This system is an aid to driving and does not replace the driver's responsibility for safe operation and awareness of surroundings.

3. Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

3.1. irudia: Amaituview sartutako osagai guztien artean.

Monitor Package:

• 1 x 5-inch AHD 800x480 Car TFT LCD Monitor
• 1 x Zigarro-pizgailuaren egokitzailea
• 1 x Dashboard Mounting Bracket
• 1 x Windshield Suction Cup Mounting Bracket
• 1 x 5FT Power Cable (for monitor)
• 1 x User Manual (for monitor)
• 1 x RCA Video Coupler

Camera Package:

• 1 x HD 720P Backup Camera
• 1 x 26FT Double Shielded Video Cable
• 1 x 5FT Power Cable (for camera)
• 1 x Metal Holder set
• 1 x Accessory Bag for Metal Holder
• 1 x Silicone Holder
• 1 x Accessory Bag for Silicone Holder
• 1 x User Manual (for camera)
• 1 x zinta itsasgarria
• 1 x Removal Tool
• 5 x kremailerazko gorbata
• 5 x Hari-euskarriaamps
• 1 x Mini bihurkin
• 1 x RCA Male to Male Coupler
• 1 x RCA Female to Female Coupler
• 1 x Electric Adhesive Tape
• 2 x T-tap Sets

4. Produktuaren zehaztapenak

Monitorearen zehaztapenak:

Kameraren zehaztapenak:

5. Konfigurazioa eta instalazioa

5.1 Monitorearen instalazioa

The monitor can be installed using either the dashboard mounting bracket or the windshield suction cup mounting bracket.

1. Aukeratu kokapena: Select a location on your dashboard or windshield that does not obstruct your view edo ibilgailuen kontrolak oztopatzea.
2. Lotu euskarria:
   • For dashboard mount: Secure the dashboard bracket to the desired surface using the adhesive pad or screws (not included).
   • For suction cup mount: Press the suction cup firmly against a clean, smooth windshield surface and engage the locking lever.
3. Muntaketa Monitorea: Attach the monitor to the chosen bracket. Adjust the angle for optimal viewing.
4. Potentzia-konexioa: Connect the monitor's power cable to the cigarette lighter adapter or directly to a 12-30V DC power source in your vehicle.

5.1. irudia: Monitor and camera components.

5.2 Kameraren instalazioa

The camera offers versatile installation options for front, rear, or side views. Use the provided metal or silicone holders.

5.2. irudia: Examples of camera installation positions.

1. Select Mounting Position: Choose a suitable location (e.g., license plate area for rear view, grille for front view, under side mirror for side view).
2. Attach Holder: Secure the metal or silicone holder to the chosen surface using screws or adhesive tape.
3. Muntatu kamera: Insert the camera into the holder.
4. Egokitu Angelua: Use the mini screwdriver to adjust the camera's lens angle (360-degree rotatable body) for the desired viewikuspegia.
   

   5.3. irudia: Camera angle adjustment.

5.3 Kableatu-diagrama

Follow the wiring diagram carefully to connect the camera to the monitor and vehicle power supply.

5.4. irudia: Wiring connections for the camera system.

• Connect the 4-pin camera cable to the provided 26FT Double Shielded Video Cable.
• Connect the video cable's RCA end to the monitor's video input. The yellow plug is typically for the rear view kamera.
• Connect the camera's 5FT power cable:
  • Hari gorria: Connect to a 12-24V DC power source (e.g., reversing light positive, brake light positive, turning light positive, or ACC).
  • Hari beltza: Connect to vehicle ground (GND).
• If connecting to a head unit with a trigger wire, connect the trigger wire (usually labeled "Reverse" or "Back") from the head unit to the reversing light positive.
• Ensure all connections are secure and insulated using the provided electrical adhesive tape and zip ties.

Oharra: All 4-pin cameras require the use of the provided power cable for connection to any monitor.

6. Funtzionamendua

6.1 Monitorearen funtzionamendua

The monitor will automatically power on and display the camera feed when the connected power source (e.g., reverse gear) is activated.

6.1. irudia: Monitor rear view with menu controls.

Use the buttons on the back of the monitor to access and adjust settings:

• Menuko botoia: Press to enter the menu and navigate through options.
• Gora / Behera botoiak: Use to adjust values or select menu items.
• Eskuragarri dauden ezarpenak: Brightness, Contrast, Saturation, Tint, Language, Mode, Reset.

6.2 Kameraren Ezaugarriak

The camera offers customizable features via switcher cables:

6.2. irudia: Camera feature switcher cables.

• Kable zuria: Cut this cable to switch between mirror (rear view, default) and non-mirror (front view) image display.
• Orange Cable: Cut this cable to switch between CVBS and AHD video signal output. Ensure this matches your monitor's input capability.
• Green Cable: Cut this cable to toggle parking guidelines ON or OFF.

Oharra: Perform these cable modifications before final installation and power connection.

6.3. irudia: Camera fisheye lens with 170-degree viewangelua.

The camera features a 170-degree wide viewing angle fisheye lens, designed to cover a broad area and minimize blind spots.

7. Mantentzea

• Garbiketa: Erabili biguna, damp cloth to clean the monitor screen and camera lens. Avoid abrasive cleaners or solvents.
• Kableen ikuskapena: Periodically check all cables and connections for wear, damage, or loose contacts.
• Lentearen argitasuna: Ensure the camera lens remains free of dirt, mud, snow, or ice to maintain clear image quality.
• Muntatzeko segurtasuna: Verify that the monitor and camera mounts are secure and have not loosened over time due to vehicle vibrations.

8. Arazoak

9. Bermea eta laguntza

For warranty information and technical support, please refer to the specific warranty card included in your product package or contact GreenYi customer service directly. Keep your purchase receipt as proof of purchase.

Harremanetarako informazioa: Please visit the official GreenYi website or refer to the contact details provided in your product packaging for support.