Andoer D2 Handheld RGB LED Video Light Wand User Manual

Sarrera

Eskerrik asko erosketagatik.asing the Andoer D2 Handheld RGB LED Video Light Wand. This manual provides detailed instructions for the safe and effective use of your new light wand. Please read this manual thoroughly before operation and retain it for future reference.

Segurtasun Informazioa

• Do not expose the device to water or high humidity.
• Saihestu argi-iturriarekiko begien esposizio zuzena.
• Do not disassemble or modify the device. Repairs should only be performed by authorized personnel.
• Mantendu haurren eskura.
• Erabili emandako edo ziurtatutako kargatzeko kablea soilik.
• Do not operate in environments with flammable gases or liquids.

Paketearen edukia

Irekitzean, egiaztatu paketearen edukia. Elementuren bat falta bada edo hondatuta badago, jarri harremanetan zure saltzailearekin.

• Andoer D2 Handheld RGB LED Video Light Wand
• USB motako C kargatzeko kablea
• Erabiltzailearen eskuliburua (dokumentu hau)

Produktua amaituview

Familiarize yourself with the components and controls of the Andoer D2 light wand.

Irudia: Amaituview of the Andoer D2 light wand, showing its dimensions (approximately 49.5cm / 19.5in long and 3.8cm / 1.5in diameter) and control panel. The control panel includes a Power Indicator Light, Mode Selection button, Power Switch, Brightness + button, Brightness - button, and a Charging Port.

Kontrol panelaren funtzioak:

• Switch potentziala: Turns the light wand on or off.
• Modu aukeraketa: Cycles through different lighting modes (e.g., CCT mode, RGB color effects).
• Distira +: Increases the light brightness.
• Distira -: Decreases the light brightness.
• Argiaren adierazle argia: Shows the power status and charging status.
• Kargatzeko ataka (C motakoa): Barneko bateria kargatzeko erabiltzen da.

Konfigurazioa

Hasierako karga:

Before first use, fully charge the light wand. Connect the provided USB Type-C cable to the charging port on the device and the other end to a USB power adapter (not included) or a computer USB port. The power indicator light will show charging status.

Irudia: Gertu bat view of the Type-C charging port, indicating where to connect the charging cable.

Irudia: The Andoer D2 light wand shown alongside its USB Type-C charging cable, illustrating the charging setup.

Muntatzeko aukerak:

The Andoer D2 light wand can be used handheld for flexible lighting or mounted for stable positioning. It features a standard 1/4-inch screw hole at the bottom.

Irudia: Xehetasun bat view of the 1/4-inch screw hole located at the base of the light wand, demonstrating how it can be attached to a light stand or tripod for stable use. Note that the light stand/tripod is sold separately.

• Eskuko erabilera: Simply hold the light wand to direct light as needed.
• Tripod/Light Stand Mounting: Screw the 1/4-inch thread at the bottom of the light wand onto a compatible tripod or light stand. Ensure it is securely fastened before use.

Funtzionamendu-argibideak

Piztu/Itzali:

Eduki sakatuta Pizteko etengailua argi-hagaxka pizteko edo itzaltzeko botoia.

Distira doitzea:

The light wand offers 12 levels of adjustable brightness. Use the Distira + botoia distira handitzeko eta Distira - txikitzeko botoia.

Irudia: Illustration of the 12 levels of adjustable brightness, demonstrating the range from dim to bright light output.

Kolore-tenperatura doitzea (CCT modua):

In CCT mode, you can adjust the color temperature between 2500K (warm light), 5500K (neutral/daylight), and 8500K (cold light). Press the Modu hautaketa button to cycle to CCT mode, then use the Distira + eta Distira - buttons to adjust the color temperature.

Irudia: Visual representation of the adjustable color temperatures, ranging from warm (2500K) to neutral (5500K) to cool (8500K) light.

Activating Colorful Light Effects (RGB Mode):

The light wand features 7 colorful light effects: red, green, blue, orange, purple, light blue, and red & blue flash. Press the Modu hautaketa button to cycle through these RGB effects. Brightness can still be adjusted in these modes using the Distira + eta Distira - botoiak.

Irudia: A visual guide to the 7 colorful light effects available, showcasing the vibrant range of colors the light wand can produce.

Kargatzen

The Andoer D2 light wand has a built-in 2600mAh rechargeable lithium battery. When the battery is low, the power indicator light will signal. To charge:

1. Connect the small end of the USB Type-C charging cable to the charging port on the light wand.
2. Connect the standard USB end of the cable to a USB power source (e.g., wall adapter, power bank, computer USB port).
3. The power indicator light will illuminate or change color to indicate charging. It will change again or turn off when fully charged.

A full charge provides approximately 2.5 hours of continuous use at maximum brightness.

Mantentzea

• Clean the light wand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Gorde gailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• If not used for extended periods, charge the battery every 3 months to maintain battery health.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

Andoer products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Andoer webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

Andoer Official Webgunea: Andoer Store on Amazon