WORKPRO 3.6V Cordless Grass and Shrub Shear User Manual

Sarrera

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Segurtasun Informazioa

Beti jarraitu oinarrizko segurtasun neurriak tresna elektrikoak erabiltzean, sute, deskarga elektriko eta lesio pertsonalen arriskua murrizteko.

• Irakurri eskuliburua: Irakurri eta ulertu argibide guztiak tresna erabili aurretik.
• Mantendu eremua garbi: Mantendu haurrak, ingurukoak eta maskotak funtzionamendu-eremutik urrun.
• Babes-ekipoak jantzi: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Harrapaketa segurua: Erabili bitartean, eutsi beti tresnari bi eskuekin ondo.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Kargatzen: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Biltegiratzea: Gorde tresna leku lehor eta seguru batean, haurren eskura ez dagoen lekuan.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Paketearen edukia

Egiaztatu elementu guztiak bertan daudela eta egoera onean daudela paketea hustu ondoren:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x C motako kargatzeko kablea
• 1 x Erabiltzailearen eskuliburua

Produktua amaituview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Unitate nagusia: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• C motako kargatzeko ataka: Barneko bateria berriro kargatzeko.
• Segurtasun-blokeo botoia: Ustekabeko abiaraztea saihesten du.
• ON / OFF etengailua: Activates the motor when the safety lock is disengaged.
• Blade askatzeko botoia: Palak azkar eta erraz aldatzeko aukera ematen du.
• TPR Anti-Slip Handle: Helduleku eroso eta segurua eskaintzen du.

Konfigurazioa

Bateria kargatzen

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Aurkitu tresnaren C motako kargatzeko ataka.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. The charging indicator light will illuminate (typically red) during charging.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Deskonektatu kargagailua kargatzen amaitutakoan.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Blades instalatzea/aldatzea

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Sakatu pala ondo bere lekuan klik egin arte, ondo blokeatuta dagoela adieraziz.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Funtzionamendu-argibideak

Always wear appropriate safety gear before operating the shear.

Tresna martxan jartzea eta gelditzea

1. Ensure the desired blade is securely installed.
2. Eutsi irmo tresnari.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Belarra mozteko pala erabiltzea

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Mantentzea

Mantentze-lan erregularrak errendimendu optimoa bermatzen du eta zure tresnaren bizitza luzatzen du.

Garbiketa

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Blade Zaintza

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Irudia: Gertuko planoa view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Biltegiratzea

• Gorde tresna leku fresko eta lehor batean, eguzki-argitik eta hezetasunetik babestuta.
• Epe luzerako biltegiratze baten aurretik, ziurtatu bateria partzialki kargatuta dagoela (% 50 inguru), bateriaren osasuna mantentzeko.
• Keep out of reach of children and unauthorized users.

Arazoak konpontzea

Zehaztapenak

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Bermea eta Laguntza

Bermeari buruzko informazioa edo laguntza teknikoa lortzeko, jarri harremanetan fabrikatzailearekin edo erosketa-puntuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

Fabrikatzailea: Hang Zhou Izar Handiaren Industria Kooperatiba, LTD.

For further assistance, visit the WORKPRO official webwebgunean edo jarri harremanetan bere bezeroarentzako zerbitzuarekin.