Sarrera
This manual provides essential information for the safe and efficient operation of your VEVOR 3"-550 Deep Well Submersible Pump. Please read these instructions thoroughly before installation and use, and retain them for future reference.
The VEVOR 3"-550 Deep Well Submersible Pump is designed for reliable water supply from deep wells, suitable for domestic, agricultural, and industrial applications. It features a robust stainless steel construction, a powerful 550W motor, and a high flow rate.
Segurtasun-argibideak
OHARRA: Segurtasun-jarraibide hauek ez betetzeak deskarga elektrikoa, sutea edo lesio larriak eragin ditzake.
- Ziurtatu elikatze-iturria ponparen bolumenarekin bat datorrelatage (230 V / 50 Hz).
- Deskonektatu beti energia-iturria edozein mantentze-lan edo instalazio egin aurretik.
- Do not operate the pump without water or at a low water level to prevent overheating and damage.
- The pump must be fully submerged during operation.
- Handle the pump with care. Use the provided rope for lowering and raising the pump.
- Ziurtatu konexio elektriko guztiak behar bezala zigilatuta daudela eta uretatik babestuta daudela.
- Tresna hau ez da gaitasun fisiko, sentsorial edo mental murriztua duten edo esperientzia eta ezagutza falta duten pertsonek (haurrak barne) erabiltzeko, baldin eta haien segurtasunaz arduratzen den pertsona batek gailuaren erabilerari buruz gainbegiratu edo jarraibiderik eman ez badu.
Produktua amaituview
The VEVOR 3"-550 Deep Well Submersible Pump is constructed from durable stainless steel, designed for longevity and resistance to corrosion. It features a powerful copper motor with built-in overheat protection.
Image: VEVOR 3-inch Deep Well Submersible Pump, showing its stainless steel body and integrated power cable.
Ezaugarri nagusiak:
- Altzairu herdoilgaitzezko eraikuntza: Enhanced durability and corrosion resistance (IP68 waterproof rating).
- Kobrezko motor indartsua: 550W motor with high-precision rotor and built-in overheat protection.
- Emaria-tasa handia: Maximum flow of 2100 L/h (35 L/min).
- High Head Lift: Maximum head lift of 108 meters (354 feet).
- Multiple Filtration Mesh: Stainless steel filter mesh to prevent impurities, suitable for sand content less than 5%.
- Diseinu trinkoa: 3-inch diameter, suitable for well casings of 3 inches or larger.
- Osagarriak barne: 20m electric cord and 20m rope.
Image: Close-up of the pump's stainless steel discharge and connection, highlighting its robust construction.
Image: Diagram illustrating the internal copper motor with high-precision rotor and built-in overheat protection.
Konfigurazioa eta Instalazioa
Ponparen errendimendurako eta iraupen luzerako instalazio egokia ezinbestekoa da. Jarraitu urrats hauek arretaz:
- Prepare the Well: Ensure the well casing is at least 3 inches in diameter and free from debris.
- Attach the Rope: Securely attach the provided 20m rope to the designated sling holes on the pump. This rope will be used to lower and retrieve the pump.
- Konektatu deskarga-hodia: Connect a suitable discharge pipe (1-inch NPT) to the pump's outlet. Ensure a watertight seal.
- Konexio elektrikoa: Connect the 20m electric cord to a compatible power source (230V/50Hz). Ensure all connections are waterproof and meet local electrical codes.
- Jaitsi ponpa: Carefully lower the pump into the well using the rope. Ensure the pump is fully submerged in water. Ez let the pump rest on the bottom of the well; keep it suspended a few feet above the bottom to avoid drawing sediment.
- Hasierako egiaztapena: Before powering on, double-check all connections and ensure the pump is correctly positioned.
Image: Illustration demonstrating correct vertical installation where the pump is fully submerged, and a warning against operating without sufficient water.
Funtzionamendu-argibideak
Once installed, operating the VEVOR Deep Well Submersible Pump is straightforward:
- Piztu: Connect the pump to the power supply. The pump will start operating automatically.
- Uraren emaria kontrolatu: Observe the water flow from the discharge. Ensure it is consistent and clear.
- Etengabeko funtzionamendua: The pump is designed for continuous operation as long as it is fully submerged and the water level is adequate.
- Berotzearen babesa: The built-in overheat protection will automatically shut down the pump if it becomes blocked or overheats. If this occurs, disconnect power, allow the pump to cool, and investigate the cause before restarting.
Image: Operational diagram showing the submersible pump drawing water from a well, indicating a maximum flow of 35 L/min and a maximum head of 108m.
Mantentzea
Mantentze-lan erregularrak errendimendu optimoa bermatzen du eta ponparen bizitza luzatzen du.
- Filter Mesh Cleaning: Periodically inspect and clean the stainless steel filter mesh to prevent clogging from sediment. For newly drilled wells with excessive granular sediment, consider adding a layer of gauze at the inlet.
- Egiaztatu kalteak: Annually, or if performance degrades, retrieve the pump and inspect the casing, cable, and connections for any signs of wear, corrosion, or damage.
- Biltegiratzea: If storing the pump for an extended period, clean it thoroughly, drain all water, and store it in a dry, frost-free location.
Irudia: Gertuko planoa view of the pump's multiple filtration mesh, designed to filter impurities. A tip suggests adding gauze for new wells.
Arazoak konpontzea
Ikusi hurrengo taula arazo ohikoenak eta haien irtenbideak ikusteko:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ponpa ez da martxan jartzen | No power; tripped circuit breaker; motor overheat protection activated; faulty wiring. | Check power supply; reset breaker; allow pump to cool and check for blockages; inspect wiring. |
| Ur emaria baxua edo ez | Low water level in well; clogged filter mesh; air in the system; discharge pipe blockage; worn impeller. | Check well water level; clean filter mesh; bleed air from system; clear pipe blockage; contact service for impeller replacement. |
| Ponpa martxan dabil, baina urik ez | Pump not fully submerged; airlock; suction leak. | Ensure pump is fully submerged; prime the pump if possible (though submersible pumps are self-priming, air pockets can occur); check for leaks in the discharge line. |
| Ponpa maiz piztu eta itzaltzen da | Low water level; pressure switch malfunction (if applicable); small leak in system. | Check well water level; inspect pressure switch; check for leaks in plumbing. |
Zehaztapenak
Technical specifications for the VEVOR 3"-550 Deep Well Submersible Pump:
| Zehaztapena | Balioa |
|---|---|
| Eredua | 3QGD1-60-0.55 (3"-550) |
| Materiala | Altzairu herdoilgaitza |
| Boterea | 550 W |
| liburukiatage | 230V / 50Hz |
| Gehienez Jario tasa | 2100 L/h (35 L/min) |
| Buruaren gehienezko altxatzea | 108 m (354.3 oin) |
| Hareazko erresistentzia | %5 baino gutxiago |
| Ponparen diametroa | 7.6 cm (3 hazbete) |
| Isurketaren tamaina | 2.5 cm-ko (1 hazbeteko) NPT |
| Electric Cord Length | 20 m |
| Included Rope Length | 20 m |
| Iragazgaitza kalifikazioa | IP68 |
| Funtzionamendu-tenperatura | 0°C - 40°C |
Image: Diagram showing key dimensions and performance curves of the VEVOR 3"-550 Deep Well Submersible Pump, including flow rate, head lift, power, and voltage.
Bermea eta Laguntza
The manufacturer's warranty information is not explicitly provided in the product details. For warranty claims or technical support, please contact VEVOR customer service directly or refer to the official VEVOR webgunea.
Fabrikatzailea: ZABALTZA
Modelo zenbakia: 3QGD1-60-0.55
UPC: 840281544639