JVC HA-XC72T Wireless Headphones User Manual

Sarrera

Eskerrik asko erosketagatik.asing the JVC HA-XC72T Wireless Headphones. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before use and keep it for future reference.

Segurtasun Informazioa

• Ez desmuntatu, konpondu edo aldatu unitatea.
• Saihestu unitatea tenperatura altuen, eguzki-argiaren eraginpean edo hezetasun handiaren eraginpean jartzea.
• Keep the unit away from water and other liquids, except for its specified water resistance.
• Do not use the unit at excessively high volumes for extended periods to prevent hearing damage.
• Haurren eskura ez utzi. Pieza txikiek itotzea eragin dezakete.

Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• JVC HA-XC72T Wireless Headphones (Left and Right earbuds)
• Kargatzeko kaxa
• USB kargatzeko kablea
• Earpieces (S/M/L sizes)
• "XX" Logo Sticker

Konfigurazioa

1. Entzungailuak eta zorroa kargatzea

Lehenengo aldiz erabili aurretik, kargatu guztiz entzungailuak eta kargatzeko zorroa.

1. Place both left and right earphones into the charging case.
2. Connect the USB charging cable to the charging case and a USB power adapter (not included).
3. Kargatzeko adierazlea lamps on the case will show the charging status. Once fully charged, the lamps will change or turn off.

The JVC HA-XC72T charging case with earbuds, held in a hand, highlighting the long battery life of up to 21 hours (9 hours from earbuds + 12 hours from case). Actual playback time may vary.

2. Bluetooth parekatzea

Aurikularrak gailu batera konektatzeko:

1. Take both earphones out of the charging case. They will automatically enter pairing mode. The indicator lamp on one earbud will flash rapidly.
2. Zure gailuan (smartphone-an, tabletan, etab.), gaitu Bluetooth-a eta bilatu eskuragarri dauden gailuak.
3. Select "HA-XC72T" from the list of found devices.
4. Once connected, the indicator lamp keinuka geldituko da.

Funtzionamendu-argibideak

Piztu/Itzali

• Piztu: Atera entzungailuak kargatzeko zorrotik. Automatikoki piztuko dira.
• Itzali: Place the earphones back into the charging case. They will power off automatically and begin charging.

Music Playback and Volume Control

The HA-XC72T features touch controls on each earbud.

• Erreproduzitu/Pausatu: Tap the touch sensor on either earbud once.
• Hurrengo ibilbidea: Tap the touch sensor on the right earbud twice.
• Aurreko pista: Tap the touch sensor on the left earbud twice.
• Bolumena igo: Tap the touch sensor on the right earbud three times.
• Bolumena jaitsi: Tap the touch sensor on the left earbud three times.

Noise Cancelling / Ambient Sound Mode

The headphones offer Active Noise Cancellation and a Quick Ambient Sound function.

A person wearing the JVC HA-XC72T earbud, with visual representation of noise cancellation waves, emphasizing the ability to enjoy sound in quiet environments.

• Aldatu moduak: Press and hold the touch sensor on the left earbud for approximately 2 seconds to cycle through Noise Cancelling ON, Ambient Sound ON, and Noise Cancelling OFF.
• Quick Ambient Sound: This function allows you to hear your surroundings without removing the earphones, useful for conversations.

Latentzia baxuko modua

This mode reduces audio delay, enhancing the experience for gaming and video playback.

A person enjoying video content on a smartphone while wearing the JVC HA-XC72T earbuds, illustrating the low latency mode for synchronized audio and video.

• Aktibatu/Desaktibatu: Press and hold the touch sensor on the right earbud for approximately 2 seconds to toggle Low Latency Mode ON/OFF.

Esku libreko deiak

• Deia erantzun/amaitu: Tap the touch sensor on either earbud once.
• Deia baztertu: Press and hold the touch sensor on either earbud for approximately 2 seconds.

Aurikularren erabilera bakarra

Either the left or right earbud can be used independently for music playback or calls.

Mantentzea

To ensure the longevity and performance of your headphones:

• Garbitu entzungailuak eta kargatzeko zorroa aldizka zapi leun eta lehor batekin.
• Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Ensure the earphones are dry before placing them back into the charging case.
• Gorde entzungailuak kargatzeko zorroan erabiltzen ez dituzunean, hautsetik eta kalteetatik babesteko.

The JVC HA-XC72T earbuds on a wet surface, demonstrating their IP55 water and dust resistance, suitable for outdoor use. Note: IP55 rating applies to the earbud body only.

Arazoak konpontzea

If you encounter issues with your HA-XC72T headphones, refer to the following common solutions:

No Sound from One Earbud (or other pairing issues)

If only one earbud is producing sound, or if you experience other pairing difficulties, try the following steps:

1. Place both left and right earphones back into the charging case.
2. Take both left and right earphones out of the case simultaneously. Check if the issue is resolved.
3. If the issue persists, delete the "HA-XC72T" Bluetooth registration from your device's Bluetooth settings and attempt to re-pair.
4. If the above steps do not resolve the issue, perform a factory reset (initialization) as follows:

Factory Reset (Initialization) Steps:

1. Place both left and right earphones into the charging case. Ensure the charging lamps are lit, indicating they are charging.
2. While the earphones are in the case, press and hold the touch sensors on both the left and right earphones for approximately 15 seconds. The lamp will blink or its reaction will change, indicating initialization is in progress. Perform this for both earbuds.
3. Release your fingers from the touch sensors and close the charging case lid.
4. Itxaron 10-20 segundo inguru.
5. Take both left and right earphones out of the case simultaneously. The earphones will begin synchronizing with each other again.
6. On your smartphone or device, open the Bluetooth settings. If "HA-XC72T" is still listed, select "Forget Device" or "Delete Device".
7. Perform the Bluetooth pairing process again from step 1 of the "Bluetooth Pairing" section.

Botererik ez

• Ziurtatu kargatzeko zorroa eta entzungailuak guztiz kargatuta daudela.
• Egiaztatu kargatzeko kablea ondo konektatuta dagoen.

Soinu Kalitate eskasa

• Ensure the earphones are properly seated in your ears. Try different earpiece sizes for a better seal.
• Hurbildu konektatutako gailura interferentziak murrizteko.
• Clean any debris from the earphone nozzles.

Zehaztapenak

Bermea

This product comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Laguntza

For further assistance, technical support, or warranty inquiries, please contact JVC customer service through their official webgunea edo zure produktuaren ontziarekin emandako harremanetarako informazioa.