WORKPRO W159025 Cordless 3.6V Grass and Hedge Trimmer User Manual

1. Sarrera

The WORKPRO W159025 is a versatile cordless 3.6V grass and hedge trimmer designed for efficient garden maintenance. This tool features a dual-purpose design, allowing for quick conversion between a grass shear and a hedge trimmer. Its lightweight and compact design, combined with Type-C USB charging, makes it convenient for various trimming tasks around your garden.

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your WORKPRO W159025 trimmer. Please read it thoroughly before first use and keep it for future reference.

2. Segurtasun-argibide garrantzitsuak

Beti jarraitu oinarrizko segurtasun neurriak tresna elektrikoak erabiltzean, sute, deskarga elektriko eta lesio pertsonalen arriskua murrizteko.

• Irakurri argibide guztiak: Tresnaren kontrolak eta erabilera egokia ezagutu.
• Erabili begien babesa: Beti erabili segurtasun-betaurrekoak edo babes-babesleak ebaki-makina erabiltzean.
• Mantendu eremua garbi: Ziurtatu lan-eremua hondakinik, haurrik eta animaliarik gabe dagoela.
• Saihestu ustekabeko abiaraztea: Ensure the safety lock button and operating switch are not engaged unintentionally.
• Erabili kargagailu zuzena: Only use a 5V/2A adapter for charging. Using a 5V/1A adapter may trigger overvoltage protection and prevent charging.
• Ikuskatu palak: Before each use, check blades for damage or wear. Replace if necessary.
• Palak seguruak: Ensure blades are correctly installed and secured before operation.
• Eskuak urrun eduki: Never touch the blades while the tool is operating or connected to power.
• Gorde seguru: Gorde tresna leku lehor eta seguru batean, haurren eskura ez dagoen lekuan.

3. Paketearen edukia

Egiaztatu elementu guztiak bertan daudela paketea desegiten duzunean:

• WORKPRO W159025 Main Unit
• Belarra mozteko pala (75 mm-ko ebakitze zabalera)
• Hedge Trimmer Blade (120mm cutting width, 7.8mm max cutting diameter)
• Type-C USB Cable (1m)
• Erabiltzailearen eskuliburua

4. Produktua amaitu daview

The WORKPRO W159025 features a compact and ergonomic design for comfortable use. Key components include:

• TPR Handle: Helduleku eroso eta segurua eskaintzen du.
• Segurtasun blokeo botoia: Ustekabeko aktibazioa saihesten du.
• Funtzionamendu-etengailua: Activates the blades.
• Blade askatzeko botoia: For quick and tool-free blade changes.
• C motako kargatzeko ataka: Kargatzeko erosotasuna lortzeko.
• LED Charging Indicator Light: Displays charging status (Red: Charging, Green: Fully Charged, Yellow: Approx. 50% charged).
• Pala trukagarriak: Includes both grass shear and hedge trimmer blades.

Figure 1: WORKPRO W159025 Component Diagram

5. Konfigurazioa

5.1. Bateria kargatzea

The device is powered by a 3.6V rechargeable battery. Before first use, fully charge the battery.

1. Bilatu gailuan C motako kargatzeko ataka.
2. Connect the provided Type-C USB cable to the charging port.
3. Konektatu USB kablearen beste muturra 5V/2A-ko USB elikatze-egokitzaile batera (ez dago barne).
4. The LED indicator light will show red during charging. It will turn green when fully charged (approximately 2-3 hours). A yellow light indicates approximately 50% charge.

Figure 2: Type-C Charging

5.2. Changing Blades

The WORKPRO W159025 allows for easy, tool-free blade changes between the grass shear and hedge trimmer blades.

1. Ziurtatu gailua itzalita dagoela eta edozein elikatze-iturritik deskonektatuta dagoela.
2. Push the two blade release buttons on either side of the blade housing.
3. Carefully remove the installed blade.
4. Align the desired blade (grass shear or hedge trimmer) with the pins on the main unit.
5. Press the blade firmly into place until it clicks securely.

Figure 3: Blade Change Mechanism

6. Funtzionamendu-argibideak

6.1. Piztu/Itzaltzea

The WORKPRO W159025 features a dual safety mechanism to prevent accidental starts.

1. To start the tool, simultaneously press the safety lock button (located on the top of the handle) and the operating switch (trigger).
2. Once the tool starts, you can release the safety lock button, and the tool will continue to operate as long as the operating switch is pressed.
3. To turn off the tool, release the operating switch.

Figure 4: Safety Lock and Operating Switch

6.2. Using the Grass Shear

Attach the grass shear blade for trimming grass in small areas, around edges, or where larger mowers cannot reach.

• Ziurtatu belarra mozteko guraizearen pala ondo lotuta dagoela.
• Hold the tool firmly with both hands, if possible, or one hand if comfortable and safe.
• Activate the tool as described in Section 6.1.
• Move the tool steadily across the grass, maintaining a consistent height. The cutting width is 75mm.

Figure 5: Grass Shearing Operation

6.3. Using the Hedge Trimmer

Attach the hedge trimmer blade for shaping shrubs and hedges. The cutting width is 120mm, and the maximum cutting diameter is 7.8mm.

• Ensure the hedge trimmer blade is securely attached.
• Hold the tool firmly, ensuring a stable grip.
• Activate the tool as described in Section 6.1.
• Move the trimmer smoothly along the hedge, cutting small amounts at a time. Avoid forcing the blades through thick branches.
• The handle can rotate 180 degrees for improved ergonomics and access to different angles. To rotate the handle, press the handle rotation button (if present, otherwise manually rotate if designed for it) and adjust to the desired position.

Figure 6: Hedge Trimming Operation

7. Mantentzea

7.1. Cleaning and Blade Care

• Always ensure the tool is switched off and the battery is removed (if applicable) before cleaning or performing maintenance.
• Clean the blades after each use to remove sap, debris, and dirt. Use a stiff brush and a damp cloth. For stubborn residue, a blade cleaner or light oil can be used.
• Periodically apply a thin layer of machine oil to the blades to prevent rust and ensure smooth operation.
• Inspect blades for sharpness and damage. Dull or damaged blades can reduce efficiency and increase strain on the motor. Replace worn blades as needed.

7.2. Biltegiratzea

• Gorde tresna leku lehor eta ondo aireztatu batean, eguzki-argitik eta tenperatura altuetatik babestuta.
• Ensure the blades are clean, dry, and lightly oiled before storage.
• Tresna haurren eta baimenik gabeko pertsonen eskura ez dagoen leku batean gorde.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information, technical support, or replacement parts, please contact WORKPRO customer service or refer to the official WORKPRO webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.

Laguntza gehiago lortzeko, bisita dezakezu WORKPRO denda Amazonen.