Corsair HX1500i 1500W ATX Power Supply User Manual

1. Sarrera

The Corsair HX1500i is a fully modular, ultra-low noise ATX power supply designed to deliver stable and efficient power to high-performance personal computers. It is compliant with the latest ATX 3.1 and PCIe 5.1 standards, making it suitable for modern graphics cards and demanding system configurations. This power supply features 80 PLUS Platinum efficiency, a fluid dynamic bearing fan for quiet operation, and is compatible with CORSAIR iCUE software for advanced monitoring and control.

Image: The Corsair HX1500i 1500W Power Supply, a fully modular unit.

2. Segurtasun informazioa

• Always disconnect the power supply from the AC outlet before installing or removing any components.
• Ez ireki elikatze-iturria. Bolumen handikotages are present inside, even when disconnected.
• Ziurtatu lurra egokia deskarga elektrikoa saihesteko.
• Use only the modular cables provided with your Corsair HX1500i power supply. Using incompatible cables can damage the power supply and connected components.
• Install the power supply in a well-ventilated area, away from heat sources and moisture.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• Corsair HX1500i Power Supply Unit
• AC korronte kablea
• Modular Cable Set (including 12V-2x6 cable for PCIe 5.1 GPUs)
• Muntatzeko Torlojuak
• Kable Loturak
• Erabiltzailearen eskuliburua eta segurtasun informazioa

Image: The Corsair HX1500i power supply shown with its full set of modular cables.

4. Konfigurazioa eta instalazioa

4.1 Instalazio fisikoa

1. Ensure your PC case has adequate space for the HX1500i (dimensions: 7.87 x 5.91 x 3.39 inches).
2. Mount the power supply in the designated PSU bay of your PC case using the provided screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if there's a bottom vent, or upwards if not).

4.2 Modular Cabling

Connect only the necessary cables to your components. This reduces clutter and improves airflow within your PC case.

• Plaka nagusia: Konektatu 24 pin ATX kablea plakara.
• CPU: Connect the 8-pin (4+4) EPS12V cables to your CPU power connectors.
• Txartel grafikoa (GPU): Use the appropriate PCIe (6+2-pin) cables or the dedicated 12V-2x6 (PCIe 5.1) cable for compatible GPUs.
• Biltegiratze gailuak: Connect SATA power cables to SSDs, HDDs, and optical drives.
• Periferikoak: Use PATA power cables for older peripherals if needed.
• iCUE Connection: Connect the included USB Type-C to 10-1 pin cable from the PSU to an available USB 2.0 header on your motherboard for iCUE software functionality.

Irudia: Atzealdea view of the Corsair HX1500i showing the modular cable connection ports.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzaltzea

• After all connections are secure, plug the AC power cord into the power supply and a wall outlet.
• Flip the power switch on the back of the PSU to the 'ON' position.
• Power on your computer via the case power button.

5.2 CORSAIR iCUE Software Integration

The HX1500i is fully compatible with CORSAIR iCUE software, allowing for advanced monitoring and control capabilities. Download and install iCUE from the official Corsair webgunea.

• Denbora errealeko jarraipena: View power input/output, efficiency, temperature, and fan speed.
• Custom Fan Curves: Create and apply custom fan speed profiles to optimize cooling and noise levels.
• Single/Multi-Rail OCP: Toggle between single-rail and multi-rail overcurrent protection (OCP) modes on-the-fly.

Image: Screenshot of the CORSAIR iCUE software displaying power supply metrics and fan control options.

5.3 Zero RPM Fan Mode

The HX1500i features a Zero RPM fan mode. At low and medium loads, the 140mm fluid dynamic bearing fan will stop spinning entirely, providing near-silent operation. The fan will automatically activate when the load increases to maintain optimal temperatures.

Image: Close-up of the power supply fan, highlighting the Zero RPM mode feature.

6. Mantentzea

• Garbiketa: Periodically clean the power supply's fan grille and exterior with compressed air to remove dust buildup. Ensure the PSU is powered off and unplugged before cleaning.
• Kableen kudeaketa: Kableen konexioak aldizka egiaztatu, ondo finkatuta daudela eta aire-fluxua oztopatzen ez dutela ziurtatzeko.
• Ingurumen-baldintzak: Maintain a stable room temperature and humidity to prolong the lifespan of the power supply.

7. Arazoak

• Potentziarik gabe: Check all cable connections, especially the 24-pin ATX and EPS12V cables. Ensure the PSU's power switch is 'ON' and the AC cord is securely plugged in. Test the wall outlet with another device.
• Sistemaren ezegonkortasuna/matxurak: This could indicate insufficient power or a faulty component. Monitor power supply readings via CORSAIR iCUE software. Ensure your system's total power draw does not exceed the PSU's capacity.
• Haizagailua ez dabil biraka: If the system load is low, the Zero RPM mode may be active. The fan will spin up automatically under higher loads. If the fan never spins under heavy load, contact support.
• For further assistance, refer to the Corsair support webwebgunean edo jarri harremanetan bere bezeroarentzako zerbitzuarekin.

8. Zehaztapenak

9. Bermea eta Laguntza

The Corsair HX1500i power supply is backed by a ten-year warranty, ensuring long-term reliability and peace of mind. For warranty claims, technical support, or additional product information, please visit the official Corsair support webgunea: www.corsair.com/support