Aigo AC SE 360 Rainbow 360mm Water Cooler Instruction Manual

1. Sarrera

Thank you for choosing the Aigo AC SE 360 Rainbow 360mm Water Cooler. This all-in-one liquid cooling solution is designed to provide efficient thermal management for your high-performance CPU, featuring a 360mm triple radiator and vibrant ARGB lighting. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your product.

Image 1.1: Aigo AC SE 360 Rainbow 360mm Water Cooler assembled view.

2. Segurtasun informazioa

• Always disconnect power from your computer before installation or maintenance.
• Manipulatu osagaiak kontu handiz kalteak ekiditeko.
• Ziurtatu lurrerako egokia den arrisku elektrikoak saihesteko.
• Mantendu produktua hezetasunetik eta muturreko tenperaturatik urrun.
• Do not attempt to open the pump or radiator, as this may void the warranty and cause leaks.
• Mantendu haurren eskura.

3. Paketearen edukia

Egiaztatu behean zerrendatutako osagai guztiak zure paketean daudela:

• 1x Aigo AC SE 360 Water Cooler Unit (Radiator, Pump/CPU Block, Tubing)
• 3x 120 mm-ko ARGB haizagailuak
• Mounting Hardware for Intel Sockets (LGA 115X, 1200, 1700, 2011, 2066)
• Mounting Hardware for AMD Sockets (AM2, AM3, AM4, AM5)
• Pasta Termikoa
• Fan Screws and Radiator Screws
• ARGB Controller (if included with your specific model)

Image 3.1: All components included in the Aigo AC SE 360 package.

4. Konfigurazioa eta instalazioa

Follow these steps for proper installation of your Aigo AC SE 360 Water Cooler:

1. Prestatu plaka basea: Install the appropriate backplate and standoffs for your CPU socket (Intel: 115X, 1200, 1700, 2011, 2066; AMD: AM2, AM3, AM4, AM5). Refer to your motherboard manual for specific instructions.
2. Aplikatu pasta termikoa: Clean the CPU surface. Apply a small amount of thermal paste to the center of the CPU IHS (Integrated Heat Spreader).
3. Mount the CPU Block/Pump: Carefully place the CPU block onto the CPU, aligning it with the standoffs. Secure it with the provided screws, tightening them in a diagonal pattern until snug. The magnetic block design allows for easy rotation to align the logo or tubing as desired.
4. Install Fans to Radiator: Attach the three 120mm ARGB fans to the radiator using the longer screws provided. Ensure the fan airflow direction is correct for your case configuration (typically blowing air through the radiator).
5. Erradiadorea muntatu: Install the radiator assembly into your PC case. The 360mm radiator is compatible with most ATX cases that support this size. Secure it with the appropriate screws.
6. Connect Fans (Daisy Chain): The fans feature a daisy chain connection system. Connect the fans to each other in series, then connect the final fan's cable to the motherboard's fan header or an ARGB controller. This simplifies cable management by reducing the number of cables.
7. Konektatu ARGB argiztapena: Connect the ARGB cables from the fans and pump to a 3-pin, 5V ARGB header on your motherboard or a dedicated ARGB controller. Ensure the voltage is correct (5V) to prevent damage.
8. Ponparen potentzia konektatu: Connect the pump's 4-pin power connector to a dedicated AIO_PUMP or CPU_FAN header on your motherboard.
9. Kableen kudeaketa: Organize all cables neatly to ensure proper airflow and a clean build.

5. Funtzionamendu-argibideak

Once installed, the Aigo AC SE 360 Water Cooler operates automatically to maintain optimal CPU temperatures. Here are key operational aspects:

• Automatic Cooling: The pump and fans will adjust their speed based on CPU temperature, ensuring efficient cooling. The pump operates at 12V with 3200 RPM, and fans operate between 800-1800 RPM.
• ARGB Argiztapenaren Kontrola: The Rainbow ARGB lighting can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through an included ARGB controller. This allows for various lighting effects and synchronization with other ARGB components.
• Zarata maila: The cooler is designed for quiet operation, with a noise level of approximately 30 dB.

6. Mantentzea

Regular maintenance helps ensure the longevity and performance of your water cooler:

• Hautsa garbitzea: Periodically clean the radiator fins and fan blades to prevent dust buildup, which can impede airflow and cooling performance. Use compressed air or a soft brush.
• Hodiak ikuskatu: Check the tubing for any signs of kinks, leaks, or damage.
• Monitorearen tenperaturak: Use monitoring software to keep an eye on your CPU temperatures. Significant increases may indicate a need for further inspection or cleaning.
• Pasta termikoa: While not frequently required, reapplying thermal paste every few years can help maintain optimal thermal transfer.

7. Arazoak

If you encounter issues with your Aigo AC SE 360 Water Cooler, refer to the following common problems and solutions:

8. Zehaztapenak

9. Bermea eta Laguntza

The Aigo AC SE 360 Water Cooler comes with a 12 hilabeteko bermea erosketa-datatik aurrera. Berme honek erabilera-baldintza normaletan fabrikazio-akatsak estaltzen ditu.

For technical support, warranty claims, or any questions not covered in this manual, please contact your retailer or the Aigo customer support team. Please have your proof of purchase and product model number (ACSE360) ready when contacting support.