Jectse 2.4GHz 4-Channel RC Gyro Receiver Instruction Manual

1. Produktua amaitu daview

The Jectse 2.4GHz 4-Channel RC Gyro Receiver is designed for remote control vehicles such as cars and boats. It features a single antenna bidirectional transmission system and integrates a high-performance gyroscope for enhanced control. This receiver is compatible with AFHDS 3 transmitters, including Flysky NB4, Noble Lite, and Noble Pro series.

Ezaugarri nagusiak hauek dira:

• Bidirectional transmission with a single antenna.
• Support for PWM, PPM, i BUS2, S.BUS, and J BUS data output.
• Compatibility with AFHDS 3 protocol transmitters.
• Built-in high-performance gyroscope.
• Integrated BVD (Battery Voltage Detection) function.
• PPX6 splash-proof rating.

Image 1.1: The Jectse RC Gyro Receiver highlighting its multi-function capabilities, including external single antenna with back propagation, built-in high-performance gyroscope, integrated BVD battery voltage detection, and PPX6 splash-proof design.

2. Paketearen edukia

Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• 1 x Gyro Receiver
• 1 x Konexio kablea
• 1 x Argibide eskuliburua (dokumentu hau)
• 1 x Plastikozko Kutxa

Image 2.1: The Jectse RC Gyro Receiver shown alongside its included connection cable.

3. Zehaztapenak

Image 3.1: The Jectse RC Gyro Receiver, illustrating its single antenna bidirectional transmission system and the various data output types supported (PWM, PPM, i BUS, S.BUS, i BUS2).

4. Konfigurazioa eta instalazioa

Follow these steps to properly install and set up your Jectse RC Gyro Receiver:

1. Instalazio fisikoa: Mount the receiver securely in your RC vehicle (car or boat), ensuring it is protected from excessive vibration and moisture.
2. Potentzia-konexioa: Connect the receiver to a power source within the specified input power range of 3.5-9 V DC.
3. Transmisorearen bateragarritasuna: Ensure your transmitter uses the AFHDS 3 protocol. Compatible transmitters include Flysky PL18, NB4, NB4 Lite, and other Noble series transmitters.
4. Lotura prozesua:
   • Piztu hargailua.
   • Eduki sakatuta Lotu button on the receiver.
   • Initiate the binding process on your AFHDS 3 compatible transmitter according to its specific instructions.
   • Once bound, the receiver's indicator light will confirm a successful connection.
5. Data Output Connections: Connect your servos, ESC, and other components to the appropriate PWM, PPM, i BUS2, S.BUS, or J BUS ports on the receiver.
6. BVD Port Connection: If using the Battery Voltage Detection (BVD) function, connect the provided cable to the BVD port bakarrik. Do not connect other components to this port.
7. Gyroscope Function (Noble Series): For Noble series transmitters, you may need to enable the gyroscope function (INr4 GYB) through your transmitter's settings menu. Refer to your transmitter's manual for detailed instructions.

4.1. irudia: Plano hurbila view of the Jectse RC Gyro Receiver, showing the various ports for connections and the "Bind" button for pairing with a transmitter.

Image 4.2: The connection cable, with a clear warning to connect it to the BVD port only for battery voltage detekzioa.

5. Funtzionamendu-argibideak

Once the receiver is successfully installed and bound to your transmitter, you can begin operation:

• Oinarrizko kontrola: Use your AFHDS 3 transmitter to control your RC vehicle. The receiver processes signals for steering, throttle, and other functions via the connected servos and ESC.
• Gyroscope Function: The built-in gyroscope provides stability and improved handling, especially for drift cars and other high-performance vehicles. Adjust gyroscope sensitivity via your transmitter if supported.
• Bateria Voltage Detection (BVD): If the BVD cable is connected, your transmitter can display the real-time battery voltage of your RC vehicle, allowing you to monitor power levels during operation.
• Datuen irteera: The receiver supports various data output protocols. Ensure your connected devices (e.g., flight controllers, telemetry modules) are configured to receive data from the appropriate port (PWM, PPM, i BUS2, S.BUS, J BUS).

Image 5.1: The Jectse RC Gyro Receiver, detailing its compatibility with AFHDS 3 transmitters (PL18, NB4, NB4 Lite) and its suitability for various RC applications including drift cars, recreational vehicles, F1, and linear acceleration cars. It also notes the ability to enable gyroscope function for Noble series.

6. Mantentzea

Proper maintenance ensures the longevity and reliable performance of your receiver:

• Garbiketa: Regularly clean the receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Ingurumen-baldintzak: Operate and store the receiver within the specified temperature range (-10°C to +60°C) and humidity range (20%-95%).
• Hezetasunaren babesa: While the receiver is PPX6 splash-proof, avoid submerging it in water or exposing it to heavy rain. Ensure all connections are dry before powering on.
• Konexioaren Osotasuna: Periodically check all wire connections for looseness or damage. Secure any loose connections.
• Firmware eguneraketak: The receiver supports online updates. Check the Jectse official website or your transmitter's manufacturer for available firmware updates to ensure optimal performance and access to new features.

7. Arazoak

If you encounter issues with your receiver, refer to the following common troubleshooting steps:

• Potentziarik gabe:
  • Check power source connection and battery charge.
  • Ziurtatu sarrera voltage is within 3.5-9 V DC.
• Lotura-hutsegitea:
  • Ensure both receiver and transmitter are in binding mode.
  • Verify your transmitter is AFHDS 3 compatible.
  • Move closer to the transmitter during the binding process.
  • Egiaztatu beste 2.4 GHz-ko gailuen interferentziarik dagoen.
• Loss of Signal/Intermittent Control:
  • Check antenna placement; ensure it is not obstructed or damaged.
  • Verify the transmitter battery level.
  • Ziurtatu ez dagoela interferentzia iturri indartsurik inguruan.
• Gyroscope Not Functioning (Noble Series):
  • Confirm the gyroscope function (INr4 GYB) is enabled in your transmitter's settings.
  • Refer to your transmitter's manual for specific gyroscope calibration or adjustment procedures.
• Datuen irteera okerra:
  • Verify that connected devices are configured for the correct data protocol (PWM, PPM, i BUS2, S.BUS, J BUS).
  • Check wiring connections to ensure they are correctly plugged into the designated ports.

If problems persist, consult the support resources mentioned in the next section.

8. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Jectse customer service directly. Keep your proof of purchase for warranty claims.

Laguntza gehiago lortzeko, bisita dezakezu hau ere: Jectse Store on Amazon.